When does the Runtime Service start up and down

Hi,
I'm really concerning when this service will be down by closing some applicaton. Like owb session, it will be shut whenever exit owb client or disconnect from OMB Plus. The session of run time owner start from Runtime Service is always there (can be seen from TOAD).
Looking forward to your help,
Thanks,
Daming

Daming,
The runtime platform service is a Java-based program that is being invoked from within the database by a database job. As soon as you start the database the database job becomes active. Once the database shuts down, the runtime platform service goes down. The availability of the runtime platform service is totally unrelated to using the design client.
If you want to explicitly stop and start the runtime platform serivce while the database is open, run <owb home>\owb\rtp\sql\stop_service.sql and <owb home>\owb\rtp\sql\start_service.sql respectively (connect using the runtime repository owner).
Thanks,
Mark.

Similar Messages

  • HT1657 If I download a movie today, but will not be watching it for a few weeks (i.e. when overseas) - when does the 'activation' period start?  Do I have 48 hours from the download date or when I first watch the movie?

    If I download a movie today, but will not be watching it for a few weeks (i.e. when overseas) - when does the 'activation' period start?  Do I have 48 hours from the download date or when I first watch the movie?

    You have 30 days from when you download it, but when you then start watching it you have 48 hours (24 if your account is US based) to finish watching it before it expires.

  • When does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.

    when does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.

    Freialeben7 the evaluation period begins when you first launch the Adobe application you are wishing to evaluate.

  • When does the tick count start

    I see that the tick counter rolls over at 2^32 ms, that's 49 days.  So if the counter started when Labview or the VI starts, I would never care about the rollover. 
    So when does it start?  Can I control when it starts?     I need a resolution less than 1 sec, so the second timers don't help me.
    Also do other funtions or VIs continue to operate when a Wait (ms) function is running?

    The tick count does not begin when you open LabVIEW or the VI. The on-line help says that the base time is undefined. There is however, no problem with you taking the tick count when you first start the VI and using that later in the VI. It's also untrue that the other time functions in LabVIEW only have 1 second resolution. They have the same millisecond resolution as tick count. If you have code in parallel with the Wait (ms) function, they will exeucte in parallel.
    Also, in the future, post questions of this nature to the LabVIEW board. This board is for the NI counter/timer boards.

  • When does the iMac come to Asia and Indonesia ????

    Does everyone know ??? Please, I have indent it but I want it as soon as come to Indonesia !!!!

    Taiwan.
    Monday, August 21, 2007.
    http://www.digitimes.com/systems/a20070822PD211.html
    *Taiwan market: Apple introduces new 20- and 24-inch iMac desktops*
    Yen-ting Cheng, Taipei; Steve Shen, DIGITIMES [Wednesday 22 August 2007]
    Apple on August 21 unveiled its new 20- and 24-inch series iMac desktop PCs in Taiwan, with availability of the new iMacs to start in the Taiwan market by the end of this month, according to sources at Apple Taiwan.
    To boost the sale of iMacs, the new models will be available at more competitive prices than their predecessors, with the 20- and 24-in iMacs carrying a suggested retail price of NT$42,900 (US$1,304) and NT$1,972, down 20% and 10%, respectively, from previous models with the same display sizes, the sources noted.
    All new iMacs come with an Intel Core 2 Duo processor, pre-installed iLife 08 and iWork 08 application software, and specially-designed ultra-thin aluminum keyboards, according to company data.

  • How do I stop the Runtime Service (UNIX) for a period of time (24 hours)

    Greetings
    Environment:
    OWB Client 10g on Windows XP Professional
    Repository - 9.2.0.4 on UNIX (AIX 5.2)
    Target schema - 9.2.0.4 on UNIX (AIX 5.2)
    I need to stop the Runtime service for 24-48 hours while the database is being upgraded from 9i to 10g. It seems the running service is causing some problems as the database is being started and stopped by the upgrade process (dbma).
    What starts the Runtime service at database startup?
    How can I prevent it from starting for 24-48 hours?
    Anyone else have issues upgrading from 9i to 10g using the migration assistant (dbma)?
    I realize I can stop it with the stop_service.sh script but that won't prevent it from satrting by itself when the database is bounced.
    I looked at the JOB queues but it doesn't seem to be there as a job that can be controlled with the DBMS_JOB package.
    Any help is greatly appreciated.
    -gary

    Hi and thanks for the responses.
    In my case there have been no additions to the server startup script to start the Runtime service, it just starts when the database starts.
    As I stated, I am aware of the start_service.sh and stop_service.sh but these don't prevent the service from starting after a reboot of the server or a bounce of the database.
    Can anyone tell me how the Runtime service starts?
    After a database shutdown and startup I see the Runtime service running as an 'ACTIVE' UNIX process and also one or more Runtime User processes that are 'INACTIVE' but become active when a map is run.
    Any help is appreciated.
    -gary

  • At what temp does the P4's start to Throttle

    hi.
    at what temperature does the P4's start to throttle down? my P4 3.0 ghz is about 54-55 degrees celsius at idle and about 57-58 in load mode, is it a chance that it starts to throttle at this temps?
    the temps are in windows mode and mesaured in MotherBoard Monitor

    70C is the figure I have seen.

  • My i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this???

    my i phone 5c wont stop restarting!! sometimes it takes hours before the phone starts working again. Sometimes when it does this red lines go up and down the screen. Im so ready to go back to my 4s does anyone know how to fix this??? Should i mention i have tried restarting back to new and i have the most up to date software. Please help

    If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
    **Imediately backup ALL your important data while you can still see things on the monitor
    Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
    nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
    perform SMC reset just to check:
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 

  • When I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar.  How do i get rid of this

    when I start my computer the safari icon jumps up and down and i get a note: 'Community Toolbar' I'm sorry, but Safari browser version you are currently using does not support the community toolbar.  How do i get rid of this?

    Carolyn Samit has answered this question before.  I did it with this info.  Thank you Carolyn for your awesome help.

  • HT204053 does the icloud service work in middle east(lebanon) area or just in USA?coz it isn't working on my mac;it logs in,but when clicking any category like calendar,mail or find my iPhone,it tells"service unable to load,send a report..."

    does the icloud service work in middle east(lebanon) area or just in USA?coz it isn't working on my mac;it logs in,but when clicking any category like calendar,mail or find my iPhone,it tells"service unable to load,send a report..."..... so, the problem is..????

    Wow, just posting and it seems that there is a solution that is working for me...
    What I've did is I turned off iTunes Match on my iPhone, then turned in on again. Now in my iTunes library on my mac I can get the duplicates to be matched or uploaded to iCloud with a right-click, add to iCloud. iTunes Match starts to check the songs and everything is done correctly. Pretty nice!

  • TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

    I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
    On pressing retry I got the same message.
    On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
    I reinstalled with the same error messages and the same results.
    I uninstalled existing and reinstalled from scratch and the same error messages again.
    I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
    It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
    I hope you can advise me how to recover my backups

    Hi Iss9243,
    Welcome to the Support Communities!
    You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue.  Hope it helps ....
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Judy

  • I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following -  I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

    Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
    I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
    I am receiving an error problem when doing the following -
    I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
    When processing the Export I receive an error message for each of the images being exported indicating the following -
    Heading Import Results
    Some import operations were not performed
    Could not move a file to requested location. (1)
    then a description of the image with file name
    Box Save As                                  Box  OK
    If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
    To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
    Thanks if you can can help out.

    Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

  • I'm getting the following error message when ever I try to start cs6 and the program gets close. "Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly."

    Hi,
    I’m getting the following error message when ever I try to start cs6 and the program gets close.
    “Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
    Please advise what is the problem? and How to sort this out?
    OS Name
    Microsoft Windows 8.1 Pro
    Version
    6.3.9600 Build 9600
    Other OS Description
    Not Available
    OS Manufacturer
    Microsoft Corporation
    System Name
    JARVIS
    System Manufacturer
    Dell Inc.
    System Model
    Inspiron N5110
    System Type
    x64-based PC
    System SKU
    To be filled by O.E.M.
    Processor
    Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
    BIOS Version/Date
    Dell Inc. A11, 8/3/2012
    SMBIOS Version
    2.6
    Embedded Controller Version
    1.01
    BIOS Mode
    Legacy
    BaseBoard Manufacturer
    Dell Inc.
    BaseBoard Model
    Not Available
    BaseBoard Name
    Base Board
    Platform Role
    Mobile
    Secure Boot State
    Unsupported
    PCR7 Configuration
    Binding Not Possible
    Windows Directory
    C:\Windows
    System Directory
    C:\Windows\system32
    Boot Device
    \Device\HarddiskVolume2
    Locale
    United States
    Hardware Abstraction Layer
    Version = "6.3.9600.17196"
    User Name
    Jarvis\JARVIS\Abhishek
    Time Zone
    India Standard Time
    Installed Physical Memory (RAM)
    4.00 GB
    Total Physical Memory
    3.16 GB
    Available Physical Memory
    1.21 GB
    Total Virtual Memory
    3.72 GB
    Available Virtual Memory
    1.55 GB
    Page File Space
    576 MB
    Page File
    C:\pagefile.sys
    Hyper-V - VM Monitor Mode Extensions
    Yes
    Hyper-V - Second Level Address Translation Extensions
    Yes
    Hyper-V - Virtualization Enabled in Firmware
    Yes
    Hyper-V - Data Execution Protection
    Yes
    Display adapters:
      and NVIDIA GeForce GT 525M.

    Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
    Mylenium

  • How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized

    How and When  Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized. Do the actual trigger lines get measured or does the attribute get initialized to a default value when the vxi resource manager is executed?

    Hey whl6868,
    According to page 157 (or 3-135) of the manual (http://www.ni.com/pdf/manuals/370132c.pdf), there is no default value for VI_ATTR_VXI_TRIG_STATUS.  If Resman is returning valid values for it, then it must be actually reading the lines.  Else, I would only expect it to return valid values when you actually call the function yourself.
    Regards,
    David R
    Applications Engineer
    National Instruments

  • I have the kin 2 and whenever I turn it on, it does the introduction (pictures, ect.) and the pictures go on for about 3 minuets. but then when it is done, the screan turns blank. is there any way to fix this problem?

    I have the kin 2 and whenever I turn it on, it does the introduction (pictures, ect.) and the pictures go on for about 3 minuets. but then when it is done, the screan turns blank. is there any way to fix this problem?

    I have the EXACT same problem. I just got done talking with Verizon, and a replacement is on the way.

Maybe you are looking for