When does your site become "live'?

We are new to iTunes U - have been approved and now uploading media onto the site. When does your site go live to the public? Is there an approval process from Apple?
What is the process?
Thanks.
Janice
SUNY Rockland

This is my understanding.
Your offerings are immediately available via the URL that looks like https://deimos.apple.com/WebObjects/Core.woa/Browse/aug.edu - the last part is obviously the part that changes with each institution.
The listing on the iTunes University page within the iTunes Store is a different story. Apple seems to prefer to wait until a site is fully developed to have them listed there. Once you feel you are ready, I've been told to contact my Apple rep and let them know. If they think you still need more offerings or changes to your site before it shows up in their area, they'll let you know.

Similar Messages

  • IP Conflict when doing a Hyper-V Live Migration

    Hello,
    I am using Windows Server 2012 R2 Update 1 on a Fujitsu Cluster in a Box.
    I have the following issue:
    When I do a manual Live Migration of a VM, the VM Nic gets an ip conflict with itself and stops responding.
    When I do a ipconfig inside that VM, I see an APIPA Address assigned (because of that conflict). If I then disable and enable the NIC inside the guest again, the IP works correctly again with the static address I assigned inside the guest.
    When I do a quick migration there is no ip conflict issue for that VM.
    Also when Live Migration is initiated due to a reboot of the owning cluster node, there is also no issue with ip address of the VM.
    Only when doing a manual live migration. Maybe the Cisco Switch where the cluster is attached to is too slow to register the quick MAC-IP change?
    Is there anything I can do to fix the issue? Ideas?

    Answering my own question after doing some research:
    The issue is related to the networking equipment in my case.
    Setting ArpRetryCount to 0 in the Registry of TCPIP/Parameters fixed the issue in the VM.
    Interesting enough, I found the solution in the VMWare KB :-)
    See: VMWare KB 1028373

  • Best practice power setting when doing a Site Survey for VOIP

    Hi Team,
    Can someone please confirm or correct me.  When doing a Wireless Active Site Survey for Cisco VOIP, I should be setting the Test AP to local power of 14, which is 25mW?  Is this correct, or should it be another value?  I asked the customer for the power of their weakest client and they do not know, but they claim there's a high probably that they will go with Cisco VOIP clients.
    Thanks...

    When you check the signal coverage, make sure the AP's radio transmit power does not use a transmit power greater than what the client devices can support. For example, by default, the Cisco Unified Wireless IP Phone 7925G uses the highest available transmit power by default (17 dBm / 50 mW for 2.4 GHz and 16 dBm / 40 mW for 5 GHz). It is possible to have a survey report that shows good coverage in all areas; however, if you have APs that operate at the highest transmit power, you might still experience uplink issues where the client devices do not support the same transmit power. For areas where there is deficient coverage, and you increase the AP transmit power to levels that the client devices cannot support, this only increases coverage on the downlink.
    Link for the same :-
    http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidelines-wlan-00.html

  • When i visit sites with live streams sites (justin ustream) browser freezes

    Hi
    I got a huge problem everytime i visit a site like justin.tv veetle ustream freedocast or only a site with a live stream in it my browser freezes and i ned to close it it stops to react sometimes i hear a sound on justin but the picture of the stream is frozen and my browser does not react back
    when i watch livestreams on popout it works thats weird
    i think it all started after i deinstalled msn but i m not sure about that pls someone help me i tried on ie or firefox browser both same problem
    i use windows vista 32 bit version on an asus laptop

    Try to create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    You can also try to reset Firefox:
    *https://support.mozilla.org/kb/Basic+Troubleshooting

  • Internet works fine, but when doing anything on internet live, like updating steam, says can't connect to internet

    i use windows vista. Nothing live will work like updating steam after installation. Please help. Nothing has worked so far.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • When does an object become persistent?

    I'm unclear about when I need to explicitly make an object persistent:
    class PC1
    Collection _items = new ArrayList();
    class PC2
    <class name="AssociationImpl">
    <field name="_items">
    <collection element-type="PC2"/>
    </field>
    </class>
    PC1 pc1 = new PC1();
    pm.makePersistent(pc1);
    PC2 pc2 = new PC2();
    pc1._items.add(pc2);
    assert(JDOHelper.isPersistent(pc2)); // is pc2 persistent?
    Which bit of the JDO spec makes this clear?
    Thanks,
    Tom

    Hi Marc,
    I have a shop system comprised of two web applications where one is for
    maintaining the shop and the other for using the shop. When I do changes
    to the shop from the one webapp they do not show up in the second, unless
    I call refresh. Also, I have to switch off the cache, it seems and do a
    flush on the changed objects. There are some questions now:
    a) when I call refresh, is the complete state reread regardless whether
    there have been changes or not or does it know, when the state has not
    changed in the DB ? it is a performance question, I guess.
    b) can I use transactional reads to do the refresh automatically ?
    c) I noticed that refresh does not do a deep refresh of all the objects
    referenced by the one to be refreshed. Is there a way to do this or do I
    have to go thru all the objects ?
    I asked some questions some time ago in another thread, which might refer
    to. I am sorry, if I am not clear enough.
    Best regards
    Wolfgang
    Marc Prud'hommeaux wrote:
    Wolfgang-
    I take the question to mean that you are wondering how you can refresh
    the state of a persistent instance to reflect changes in the data store.
    If that is the case, then you can just call
    PersistenceManager.refresh(ob) on the object, and the newer values will
    be obtained.
    If that doesn't help, can you clarify the question a little?
    In article <cj7ris$mhr$[email protected]>, Wolfgang Kundrus wrote:
    Do I have to use transactional reads for an object to get the changes done
    by another web application ?
    Thanks
    Wolfgang
    Marc Prud'hommeaux
    SolarMetric Inc.

  • When does your Address Book picture show up to correspondents?

    In the Accounts pane of System Preferences is either a picture of us, taken when we initiated the computer or a stock picture, butterfly etc. which is also in the "My Card" of our Address Book.
    When using Mail, when do these show up to our correspondents and can we choose to include the picture or not?
    Chris

    When using Mail, when do these show up to our correspondents and can we choose to include the picture or not?
    They do not - they are a local display only
    LN

  • ?when does marginal performance become unacceptable

    Dear all,
    I have an issue with a desktop supplier:
    The desktop's integral wifi b/g adapter routinely drops about four out a 1000 1000-byte pings from the next-hop gateway through an ap1130 a/g. (for the record, plenty of bandwidth, resources, no problem seen with 3rd party WiFi adapters, usw)
    I think this sucks and that he should fix it. He thinks differently.
    Can anyone suggest an acceptable threshold for this?
    Thanks.

    This has a simple sandbox topology:
    1130 A/G ap with autonomous IOS trunked at 100/full to a 3550 l3 switchport
    I have configured the ap with 3 ssid's, all open authentication, one guest-mode, the other two with 128 bit wep keys.
    Each ssid has a corresponding svi/vlan on the switch as a next hop.
    The integral adapter drops about 4 in 1000 on the G channel no matter to which ssid it connects.
    Please note I don't see any packet drops using other wifi adapters on either A or G frequencies.
    Again I'm looking for a rule of thumb. Can you live with losing 4 packets out of a thousand? If yes, how about 1 out of a hundred? If no, how about 4 out of ten thousand?
    Thanks,

  • Does not say "The oldest backups are deleted when your disk becomes full."

    I am helping someone set up her backup, but I noticed that in the Time Machine window, there is no line that says: "The oldest backups are deleted when your disk becomes full."
    She is running Mac OS 10.5.8, on a 2.66 GHz Quad-Core. Her first backup ran fine, but we're concerned that it will not delete older backups automatically to make space.

    It works differently in Leopard and Snow Leopard.
    In Leopard, the box is titled +Warn when old backups are deleted,+ and Time Machine will fail with a message when it runs out of room and that box is checked.
    On Snow Leopard, the title is +Notify after old backups are deleted,+ and that's what happens -- the old backups are deleted, then you get a notice.
    See #C4 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).

  • Why do none of the links that I put in my outgoing yahoo emails no longer underline themselves and become live when I finish typing them and hit the space bar?

    Previously, when I typed my email address in an outgoing email or cut and pasted a link from my browser bar the link would become 'live' when I hit the space bar or 'enter' key. The link would turn blue and underline itself and the person receiving the email could just click on that live link and be taken to the site. Now the link does not turn blue or underline itself and the receiver must cut and paste the link into their browser bar to use it.
    Why? I did not change anything in Yahoo or Mozilla.
    I have deleted and reinstalled Java to no effect. I am using html in Yahoo.

    As it turns out, many others have been having similar issues on other browsers. It seems that maybe Yahoo! is taking a much longer time to load or something like that. Either way, its been working on and off all week, and the same issue even showed up yesterday with IE 8 instead of FF. It still loads faster than IE 8, but again is spotty. Some people think the issue may be with mail.yimg.com or s.yimg.com, which I could see was the loading url in the left corner whenever Yahoo! Mail was refusing to work. A couple of people said blocking it caused the issue. Alternatively, some people suggested blocking it to solve the problem. Does anyone have any information on that? Again, I have no add-ons that would be blocking any urls, and my firewall hasn't any records of it. I really don't want to do anything to mess up my browsers more than they may have already been. Thanks for all of your help so far!

  • How much does CLAD cost? When can I sit for such an examination?

    I am interested in obtaining a CLAD certificate. I live in Beirut. I have found some test centers from http://www7.pearsonvue.com/Dispatcher?application=VTCLocator&action=actStartApp&v=W2L&cid=383 but I didnt get a reply when I asked them about cost/time.
    Can you help me by answering the questions?
    How much does CLAD cost? When can I sit for such an examination?
    P.S. I've been using LabVIEW for 5 month already.

    Hi A.A.A.,
    I'm glad to hear you are interested in pursuing your Associate Developer Certification. With regards to pricing and scheduling your exam, I recommend you contact the Certification specialists at your local National Instruments office. I believe that is National Instruments Arabia. You can send an email with your questions to [email protected] or phone # +961-1-33 28 28, and they will work with you to purchase and schedule your CLAD exam.
    Five months is a great start at familiarizing yourself with the LabVIEW environment. However, I definitely recommend taking a look at the exam preparation materials to ensure you are familiar with all the topics and terminology you could be tested on. If you go to the Certification Preparation Page (the link I included below) and select the Associate Developer exam and your timeframe, the page will return all the official preparation resources the Certification Development team has made available online. We also have some other posts on this forum with regards to exam preparation.
    http://www.ni.com/training/certification_prep/
    Best of luck!
    Mallori M
    Mallori M
    National Instruments
    Global Customer Education Program Mananger
    Calculate the time you will save with NI Training

  • Html snippet works w/in iweb but NOT when site is live & online @$#!

    help!? I have had a flash based slide show working on my iweb site for some time I used iweb enhancer to make it work w/ iweb 06 - now in 08 the "enhancer" doesnt work. The html snippet should & seems to...I am able to get the pages to behave very well while IN iweb the slide shows load while the program is active & when I publish the site to a folder the site works great - UNTIL I upload it and try to view it online THEN it doesnt work properly.
    I have a google map snippet that works fine live OR when browsing from the hard drive/folder WHY wont the snippets work when they are uploaded if they work ON my computer?????
    site is www.austin-studios.com click on seniors OR children...
    -thanks in advance

    Phil,
    Everything is working fine on my end too. (OSX 10.5.2) Tried your site on Safari 3.1 / Netscape Navigator 9.0.0.3 / Firefox 2.0.0.9 and Camino Version 2007022813 (1.0.4)... each one ran your snippets with out fail
    Would emptying cache on your computer help?
    Good Luck,
    John

  • Why does this site have online chat when you can never actually chat - always "not available"?  I was trying to get a simple question answered without calling and being on hold for 10 minutes?

    Why does this site have online chat when you can never actually chat - always "not available"?  I was trying to get a simple question answered without calling and being on hold for 10 minutes?

        Hello flabucki,
    Help is just a post away for you my friend! I can help with your questions right here. May I ask what question do you have? Both myself and the community would love to assist in any way that we can.
    Thank you…
    ArnettH_VZW
    Follow us on Twitter @VZWSupport

  • Specified Host Directory does not map to your Site Address

    I have defined my site using ftp in the Dreamweaver site definitions and I can connect to it and upload changes with no problem. I am now trying to setup InContext editing capability to the site. When I go thru the steps to add a site in the InContext Admin section, the first steps in the process work fine.  I am able to fill out the ftp settings with my username and password and when I test the settings it comes back that it is able to connect to the site.  The next step is where I run into problems.  When I try to add the assets I get an error that says "The Specified Host Directory does not map to your Site Address".  I can use the same username and password with an ftp Client program and I have complete access to the root folder and all the files in it.  I have used exactly the same Host DIrectory in both my Dreamweaver Remote Setup and in InContext Admin.  Why does it work with Dreamweaver uploads and it can not be used to register in InContext?
    My site is www.sonautosales.com and my root folder is defined as /www.sonautosales.com/
    I have included a screenshot of the error message.

    Hi Corey:
    I just went thru the entire thread trying all the suggestions but 
    still no luck.  The closest I come to getting this registered is using 
    the following settings.
    ftp host:               ftp.prioritysalesandservice.com
    Passive ftp:          unchecked
    Username:          prioritysales
    Password:          ****          (I do not mind sending you the password if it will 
    help you solve my problem)
    This tests good all the time.
    Host Directory:     /www.prioritysalesandservice.com/          (This is the folder 
    name that contains my website and in it is the index.html page)
    Image Directory:     Images/                                        (the folder name inside the host 
    directory that contains my images)
    Default Page:     Default.htm Default.asp index.html index.htm index.php 
    index.cfm
    I think the host directory I am using because when I put that in and 
    then use the browse button to find the Image directory it shows all 
    the files and folders in my Host directory
    The website address is:     www.prioritysalesandservice.com
    Please let me know anything else you need, again I have tried all the 
    things mentioned in the thread and by using these settings I get the 
    following error when I save:
    The specified Host Directory does not map to your Site Address (URL)
    THe "/www.prioritysalesandservice.com/" host directory could not be 
    accessed through this Site Address (URL):
    "http://www.prioritysalesandservice.com/"
    Thanks for you help, hope you can figure it out.
    Steve

  • I just purchased FormsCentral but according to your site it is going to be closed on June 22. What does this mean for what I paid? Do you have an alternative program to use? Do I receive my money back?

    I just purchased FormsCentral but according to your site it is going to be closed on June 22. What does this mean for what I paid? Do you have an alternative program to use? Do I receive my money back?

    Kim,
    When you say you just purchased Formscentral exactly what do you mean? Formscentral has not been sold as a stand alone product in a while due to the decision to close the service. If you got Formscentral as part of a Acrobat subscription then you need to know that that part of the subscription will go away partially in June and fully in July. If you have indeed managed to purchase Formscentral standalone recently can you please give me the information about your purchase such as the date of purchase and link to the site from which you purchased. Refunds are available to customers who are not able to use the service though their contract period.
    Andrew

Maybe you are looking for