When doing a Compare, the window gets stuck on "comparing page objects"
I have to kill the Adobe session in order to continue.
I may have a similar issue: Acrobat XI Pro Compare feature dialog boxes hang
Similar Messages
-
i restored my iPod in the middle of a download, now it can't do anything but restore, and when i restore it, the screen gets stuck on weird things, like the apple screen or purple or yellow. how do i get it un-stuck?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Please solve this issue . My bill is lost and without that the service center people won't do anything
Closing this question because of duplicate:
[https://support.mozilla.org/en-US/questions/1033892 I accidently removed the battery while reset. Now when I switch on the phone gets stuck at the firefox OS logo.] -
Running a mid 2009 iMac on 10.7.5, 3 gb memory, 320 gb hd.
Suddenly the computer stoped reading DVDs and the only time I can read a CD is if I restart. Quite often when I insert a CD it gets stuck and I cannot get it out until I restart and it shows up on the desktop where I can then eject it.
I have checked and double checked the finder prefs and all looks normal showing a check mark on CDs,DVDs etc. (the ones I want to show up on the desktop)
I have reset the PEAM, repaired permissions with both the disk utility on the computer and the disk utility when I start up in the Recovery Disk. I did notice that sometimes the permission repeat the same correction several times before it moves on, and sometimes it doesn’t. I have Windows installed on a partition but I keep it unmounted until it is needed for my wife’s work. The dock seems to be just fine and all the apps seems to run just fine. When I insert a photo CD iPhoto does not open but when I insert a music CD iTunes does open.
Also, most every time I open iPhoto it takes a long time(sometimes as long as 2 minutes) for it to load.
Sometimes my Mail (Mail 5.3) does not post new mail but most of the time it does.
Once and a while it seems like the computer slows way down but then it seems ok ten minutes later.
All of these ‘things’ seemed to have happen suddenly and I have not downloaded anything from the internet in some time.
Of course the warranty and extended warranty are both no longer in effect having had this computer for more than three years.
I am running Java and Adobe Player because some of the sites I go to a lot require both.I believe that insufficient RAM may be the source of some of your problems. If you have a RAM of somewhere 4 to 8GB, you will experience smoother computing. 3GB doesn't seem right, so you might want to learn more by going to this site:
http://www.crucial.com/store/drammemory.aspx
I don't know what know what's happening with your optical drive, but it seems you use your drive quite a bit. In that case, look into a lens cleaner for your machine. It's inexpensive, works quite well.
I hope you'll post here with your results! -
Why does my iphoto seem to get "stuck" a lot of the times when I try to exit it to the point where I have to "force quit" it and how do I fix the problem that causes it?
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
does this only happen when you try to quit iPhoto?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
Happy Holidays -
Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro. the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?
Sounds like a possible permissions issue, try repairing the permissions using Disk Utility.
You can open Disk Utility several ways.
1. Use the Spotlight in the Upper Right corner of the screen and search for it, then click it to open it.
2. Open a new finder window (File> New Window)
- Applications>Utilities>Disk Utility
3. Click on the Finder
- Click 'Go' in the menu bar across the top of the screen.
- Click Utilities, then double click on Disk Utility.
Once Disk Utility is open there should be a column on the left side, the name of your hard drive should be listed there.
(By Default it is named Mac HD or Macintosh HD)
Click on it to highlight it.
There should then be a few buttons you can click
- Verify Disk Permissions
- Repair Disk Permissions
- Verify Disk
- Repair Disk
Click Repair Disk Permissions -
Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.
Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave -
I get caught in a loop when trying to log into my account in iTunes and redeeming cards. When i enter my password i get stuck in a loop where i kept getting asked for it over and over again. The weird thing is intermittently - maybe after 20 or 30 times it lets me redeem/in. But then it has the same problem again... I tried chat and it kept dropping out. Any help would be very welcome.
Ok, time to report the issue here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Recently my pc crashed and I had to have a new profile built. Now when syncing my iphone 4s to the computer the sync gets stuck on step 8 and "syncing artwork" It never finishes syncing...just sits there for hours. Subsequently most of my music and apps are missing from my iphone because it never finishes syncing. How do I fix this?
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer. -
when i run keynote in the play mode, some times the computer get stuck, why?, when i run key note in the play mode, some times the computer get stuck, why?
hello,
I had the same issue. This is what I was told to do.
iWork has to be removed completely to be effective when re-installing, you must use an application removal tool to do this or it wont remove every Keynote file.
Appcleaner will do this and its free.
The following procedure has helped solve many issues with Keynote:
1 Close Keynote then use Appcleaner
2 Empty the Trash
3 Shut down the Mac, then restart and press the shift key immediately after the startup sound, then release shift when the Apple logo appears
allow the Mac to boot up to the desktop, it will take longer then usual as the hard drive is being repaired
4 restart the Mac
5 Reinstall iWork
6 Repair permissions:
Applications > Utilities > Disk Utility > First Aid: click on your system disc in the drive column
and select Repair Disk Permissions
7 open Keynote and test -
When trying to install Epson R200 driver/utility combo, the installer gets stuck in an endless loop asking for admin password without installing. Any idea how to fix this problem?
Have you checked on the Epson support site? R200 support is located here.
-
When I click on the iphoto icon on my shelf it does not open the window. The iphoto options are found across the top of the computer but no window. Any reason?
I fixed it, thanks.
-
When I go to the Windows Icon and click on it to do a search programs
HP p7-1210 DesktopWindows 7 Home Premium 64 bit Service Pack 1 Pavillon Series
When I go to the Windows Icon and click on it and then go to "Search" to do a search programs & files it does not work.
Please help!lg-d,
Welcome to the HP Forum.
You have probably discovered by now that the issue you are (were?) facing is a problem with the Windows Index. Sometimes the service falters, sutters, fails to engage.
Please see the following to get you started:
Improve Windows searches using the index: frequently asked questions
Sometimes all it takes is to open the Index and add or remove a location to get things rolling again.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur -
Safari windows get stuck until Exposé
Hi
Every now and again, I am surfing around in Safari, and suddenly I can't click the close, minimise and zoom buttons, and the window won't move around. I can still use the content of the page perfectly well though. If I press any of the Exposé keys, it comes into the organiser-expose-thing from the edge of the screen, with just a bit poking out. When I deactivate Expose, it goes back to the edge of the screen, and the stuck window is gone. I can now drag the window perfectly.
It seems like it is making an doppelgänger of itself and then hiding away, but I would like to how to stop it happening, and, if possible, why it happens at all.
Thanks in advance.Windows get stuck at the top
Upgraded to Maverick - finder (and some other) windows are stuck to upper left corner
windows move to top left corner after sleep - anyone else see this?
Mavericks and MacMini - after sleep mode windows resized and glued to left upper corner
Window display issues in Mavericks after wake from sleep -
firefox icon is missing from "Task bar"when i am minimising the window
I am unwilling to attempt navigation away from these sites. The pop-ups that occur on the attempt to leave a site or to close the browser are exit traps offering incentive to stay.
Once upon a time, when the internet was less dangerous, I would be willing to close the exit pop-ups. Now, after twice being infected with malware trying to close the pop-ups, I now force close whichever browser I am using.
Recently, I clicked on the red X to close one pop-up, and it installed a trojan that I had to pay to be removed. When I clicked on 'Leave' in another exit pop, it didn't exit and it turned out I was giving permission to run a script file. Now that criminals have learned these exit pop-ups can be used to force a click action, the sites using them have become dangerous.
If I force the browser to close using Task manager, Please tell me how to stop FireFox from sending me directly back to the same site because it mistakenly believes it crashed when it did not. I forced it to close because I was on a site that had taken control of my browser and was not allowing me to leave the site.
No other browser sends me back to the potentially dangerous sites. I prefer Firefox, but the new version must have a setting that allows me to get safely away from a problem site?
Maybe you are looking for
-
How do I make my Airport Extreme Base Station stop asking to update?
For awhile my Airport base station has been periodically asking to update its firmware. But since everything is working fine and I've seen reports of windows computers having trouble connecting after stepping up to that version I'd rather leave it b
-
Do you want to work with Alister Chapman in Austin, Texas?
Omega - Events - FilmCraft Workshops with Alister Chapman Omega Broadcast Group Presents: CineShops FilmCraft Workshops with Alister Chapman Featuring the Sony PMW-F5, NEX-FS700 and PMW-200 CineShops FilmCraft Workshop with Alister Chapman About Alis
-
I have a third generation apple TV and it works great with renting movies and streaming from my computer's library. However, it is extremely slow uploading movies recorded on my Iphone 4S. It doesn't matter if my Iphone 4s movie is streaming from m
-
JTable :Setting the cell renderer overrides default behaviour
I have a class renderer as shown below. I would like to apply this renderer to my cells in my JTable (see below): When I use "setDefaultRenderer" I get the behaviour I expect. Fx. that number columns a right aligned, dates show as dates etc. However
-
Import data from txt-file with reading column names
Hello, after changing the the export of my simulation programm I can't use the solution postet here, wich works well. (I branded the post as soluted thats why I start a ne post) Can anybode please tell me how to adept the code to import the new type