When doing GI to a subcontracting PO through MB1B

Hi,
We are having the following problems when GI is done with movement type 541 through MB1B.
1. When the PO is GI and saved in the table MSEG there is no PO number and item in the fields EBELN and EBELP for the material document number .
2. We are able to issue the same PO again and again and it is not giving any hard error that there are no items in the PO for issue.
3. When a partial issue is done and if we try to issue for the same PO for the remaining qty in the MB1B screen, instead of the remaining qty the total qty is displayed.
We are using MB1B instead of ME2O because we need slips and labels for subcontracting
Thanks,
Bala.

Hi,
We are doing this with reference to a PO and this is done online not through a BDC or BAPI.If I make the config changes then the PO number is stored in MSEG but not the item number.
Thanks,
Bala.

Similar Messages

Error in automatic batch classification when doing 311 movements

I have created reference characteristics, that is, characteristics which have a direct reference to a database field (MCH1-LAEDA. LAst change).
When doing the movement 311 with MIGO or MB1B the batch is not classified althougt in the MCH1 the field LAEDA (last change) is updated.
In the tcode OMCV i have set the movement 311 with 1 (Classification carried out in background (all batches)).
If go to tcode MSC3N, tha classificitaion is wrong, but if I enter in tcode MSC2N the system classify the batch.
We are using this field to sort batches for consumption.
Thanks in advance.

my friend,
do you have migo or mb1b only in background??
you could set any 'foreground' option in OMCV, say, 2 or 3 (instead of 1)
did you try that?
good luck!

When playing my ipod on an ipod dock the vocals are very faint. It is fine when doing through the headphones. I am trying to sync for updates and getting the message "An unknown error occured (-1)" - help

When playing my ipod on an ipod dock the vocals are very faint. It is fine when doing through the headphones. I am trying to sync for updates and getting the message "An unknown error occured (-1)" - help

Error -1
Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
-1 error
-1 error too

Installed Photoshop Elements 13. Upon activation, get through sign in screen, but when doing serial number validation, validate goes round but does not validate. Connect Later is only way out of screen. How do I validate. Checked account but product n

How do one validate Photoshop 13. (Windows 8) Upon activation, get through to sign in screen, but when doing serial number validation, validate goes round but does not validate. Connect Later is only way out of screen. Checked account but product not listed. Installed with serial number that was sent by Adobe. Have attempted numerous times at different times of the day. On-line connection working.

Have you bothered to do any research at all? Not every app was upgrade to 5.5. Those that weren’t will next be upgraded to CS6.
Bob

HT201263 my iphone 4 has this same issue, did these steps but when it was doing the software update, half way through my phone still wouldn't move pass the apple logo. help!

my iphone 4 has this same issue, did these steps but when it was doing the software update, half way through my phone still wouldn't move pass the apple logo. help!

Please see the two articles below:
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125

My iphone 5 keeps crashing all the time and has a delay of about 3 seconds when doing anything on it i did a factory restore on it but it didnt fix the problem

my iphone 5 keeps crashing all the time and has a delay of about 3 seconds when doing anything on it i did a factory restore on it but it didnt fix the problem i went to optus to see if they could help me as my phone is through them but they knew nothing i need help please my phone is only 8 months old

Plug the device into a wall outlet and leave it for about 20 minutes. If it has not powered on at that point try a reset by pressing and holding the home and power buttons for about 15 seconds until the white Apple logo appears.

When I go into my email account through Safari, I cannot see all of my messages. 26 may show on the screen but it says I have 32. However, at the bottom right it appears as if all the messages are showing and the arrow to get more is not highlighted.

When I go to my email account through Safari, I cannot see all of my messages. It says there are 34 but I can only see 26. However, at the bottom right the arrows to go to the next screen are not highlighted? I also cannot scroll any further down. Does anyone know how to scroll down to see all of my messages? I use Travel-net Communications as my email provider (Ottawa, On, Canada).

hey ,
if it is showing you 34 mails them it is correct. when you see your mail. apple has a smart way of arranging your mail.suppose you recieve 4 mails from one email id it will show you under one highlighted mail. so when you open a mail from anyone trying scrolling it down and you will find your missing mails.

HT3204 When doing a "Network Connectivity Test" on my PC, as to iStore Connectivity, it says "Secure Link to iTunes Store failed". And when trying to "authorize" my computer to sync ringtones I downloaded to my PC, I keep getting an errot message.

When doing a "Network Connectivity Test" on my PC, while in iTunes, it tells me that "Secure Link to iTunes Store Failed", yet I'm connected to the internet. I was unable to "authorize" my PC with an error message, as well, giving me the code (-3212), saying I was not connected to the internet, yet I am. I can open browser after browser, and navigate just fine. In going through the iTunes Help menu, I am running the tests offered in the drop-downs, but I keep getting the afore-mentioned errors.

With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Intermittently, when I try to enter the internet through Safari, it freezes up and won't fully load in the internet. If I turn the iMac off and start it again, it seems fine. I have had my internet provider check everything from their end.

Intermittently, when I try to enter the internet through Safari on my Imac, it freezes up so that the loading line only goes 1/3 way across and then stops. If I shut down the computer and then restart, it usually loads fine. I have had my internet provider check eveything form their end and it is fine. I suspect that I have a software conflict. My provider and others have said that I should use FireFox because Safari is not that stable. I am running OSX Maverick on my system. This was a recent download. Is anyone else having this problem and have you any ideas how I can correct it.

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage"; [[ "$o" ]] && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately, leaving the Terminal window empty. If that doesn't happen, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type only your login password when prompted. When typing it, you won't see what you're typing. Make sure caps lock is off.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary.

File size when doing ftp via proxy

Hi ALL,
I can not see file size when doing ftp download through proxy.
Why?

Welcome to the Apple Discussions.
There’s a second setting in the New Message Window in Mail that only appears if you have a JPEG attached:
Uploaded with plasq's Skitch!
Regards
TD

HR triggers in GRC CUP.. How and when does this work

Dear Experts,
I would really appreciate if some one could shed some light on how HR triggers work in GRC CUP ?
When does this get triggered ?
Is it when the the user master record is saved or when the Info type 105 is linked ? Are there any pre-requisities that should be taken care from the Hr perspective so that I can set the expectations accordignly with HR team ?
P.S I already went through the article " How to configure HR triggers with GRC CUP ?
Thanks
Kumar

I configured HR trigger rule for infotype 0000 & subtype Z1,field MASSN with value equal to 01 to trigger new hire...i don't see any data being populated into table /VIRSA/INT_TRIG & ?VIRSA/DATA.
I could see the rule in table /VIRSA/RULEATTR.
Any help would be appreciated.
Thanks,
Srinu

Stock transfer to subcontracting vendor through sales order stock

Hi Gurus,
MRP run is taken against sales order and subcontracting PR is generated with referance to that PR subcontracting PO is created, in components there are four material and against this component special Stock Indicator E is there.
Now I want to transfer material to vendor through MB1B with referance to PO.
when I enter PO and movement type 541 no material is coming.
Please advice.

You create one stroge location like SC01 and Issue the material using the mvt type 311(loc to loc) or 301 plt to plt wherever the location is sitted. We are using this method for good issue to subcontracting. Finally using 231 mvt type make consumption entry from SC01.

Error msg when doing a Return Delivery

Hi All
Can you help here please
We are on EC SRM 4.0 and have just upgraded to SP11
When doing a return delivery on an existing confirmation,
sometimes we get a error message"Confirmation already exits"
Then we cannot do anything with this confirmation
Thanks
Prakash

Hi
<b>Please go through the SAP OSS Notes below -></b>
Note 718138 - Reading of backend purchase orders for EC POs in EBP 4.0
Note 872011 - Return not possible for item with final_entry set
Note 972572 - Error BBP_PD 860 for return delivery of a confirmation
Note 1069875 - Error when second partial cancellation is posted to backend
Note 1031297 - Movement type is always read from Customizing
Do let me know.
Regards
- Atul

How / When Does a Device Jump from the 2.4 GHz Network to the 5.0 GHz Network

I understand -- through another thread that I started -- that the Guest Network will be both 2.4 GHz as well as 5.0 GHz....I would like to understand how / when does a device jump from the 2.4 GHz network to the 5.0 GHz network as I understand that: the 2.4 GHz network is slower but has greater range relative to the 5.0 GHz network.
Thx...

Bob Timmons wrote:
A device will connect to either the 5 GHz or 2.4 GHz band based on its own capabilities and distance in relation to the router.
So, if you have a 5 GHz capable device that is in close proximity to the router, it will connect at 5 GHz. If that device moves a few rooms away from the router, it will switch over to the 2.4 GHz band since that signal will be stronger....and likely faster at that location.
Think of 5 GHz as a "same room" connection or "line-of-sight" deal. It might be OK through one wall....if it is thin.
You do have an option to assign a separate name to the 5 GHz band in AirPort Utility. Once you have done that, simply "point" the device at the network with the 5 GHz name. Some users swear by this and some swear at this.
The downside to doing this......the device will likely try to hang on to the 5 GHz connection if it moves a few rooms away from the router.....at a location where the 2.4 GHz signal is stronger and likely faster.
Again, thanks for the very helpful response.
It occurs to me from reading the above that it makes sense to let the device (using your words) connect to either the 5 GHz or 2.4 GHz band based on its capabilities and distance in relation to the router as I can see / understand the downside and issue of manually pointing to or selecting a specific network.
The reason that I purchased an Apple router is the hope that it will work better than some of the other routers I have tried as far as the 5 GHz / 2.4 GHz dual banding is concerned because in most of these cases I have had to disable the 5 GHz band to maintain a reliable internet connection...hopefully the Aiport Extreme will not require me to do so [i.e. it will work]!
With respect to *BOTH* the Primary Network and the Guest Network being dual band I can only conclude that this work because there are essentially two separates networks [i.e. 10.o.x.x and 172.16.x.x] that are using the send / receive configuration capabilities.
Thx...

Why when playing downloaded music on apple tv through my distributed audio, it sometimes skips like a scratched record or just stops (in pause mode and won't play again) and yet i have full bars on the wireless in home service from the mac to the appletv?

Why when playing downloaded music on my mac through my appletv (I have distributed audio so play it through speakers not actually on the television), which is sent wireless from mac to the apple tv, does the music sometimes skip like a scratched record or stop playing (in pause mode) altogether and won't start again when I hit play? I have full bars on the wireless icon. Anyone experience this?

Full bars don't tell the whole story. These issues usually stem from interference, use istumbler to verify

When doing GI to a subcontracting PO through MB1B

Similar Messages

Maybe you are looking for