When double click in picture frame turns blue and dont increase size
When double click in picture frame truns from yellow to blue but doesnt work. It does nothing. If select full screen it dont work either
You are welcome
Similar Messages
-
my autofill stopped working recently. I looked under preferences and all the necessary boxes are checked. When I start to fill out a form, the autofill box comes up, but when I click on it, it turns blue and nothing else happens.
Back up all data, then test after each of the following steps that you haven't already tried. Stop when the problem is resolved.
1. Press the down-arrow key. (Credit to ASC member iNeight.)
2. Quit and relaunch Safari. Force quit if necessary.
3. Click in the first field to be filled, and then select
Edit ▹ AutoFill Form
from the menu bar. You may have to reload the page in order to do this.
4. Select
Contacts ▹ Preferences ▹ vCard
and uncheck the box marked
Enable private me card
if it's checked.
5. Select your card in Contacts. Then select
Card ▹ Make This My Card
from the menu bar.
6. In Safari, select
Safari ▹ Preferences ▹ AutoFill ▹ AutoFill web forms: Using info from my Contacts card
If the box was already checked, uncheck it and then check it again.
7. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
8. Run Software Update and install any available updates. -
When using my iMac the screen turned blue and so I turned the compute off. When I turn on again power does get to the computer but there are no chimes and the screen remains black. Any advise please. David
Hello DJJOC,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your iMac's screen will not illuminate, please reset your SMC by following the information outlined below.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Note: For Intel-based Xserve computers that are not responding, you can shut down locally, or by using remote commands, or by pressing and holding the power button for five seconds.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Take care,
Alex H. -
Last night I finally sat down to learn how to use Bookmarks. I had no problem creating and organizing bookmarks, but there are some pages that I cannot bookmark. One, for example, is the Gmail log-in page, which I use multiple times a day. I type in www.gmail.com, which routes me to a longer URL and the log-in page. When I click the star to make this page a bookmark, it won't work. I've also tried using the menu option "Bookmark This Page," which also doesn't work for this website. It's seems to be hit and miss as to when Firefox will allow me to bookmark a page and when it won't. I've had no problem adding many other pages; it just seems that with a handful of them I run into this issue.
I've tried closing Firefox and re-opening, which doesn't help, but that is about the extent of my troubleshooting attempts. This problem has been an issue for me for a couple of years and through several versions of Firefox. (I think I am currently running the most recent version.) It actually led me to believe early on that either Firefox Bookmarks didn't work or I just didn't have the time to figure it out. So since I've been using Firefox I have been repeatedly typing the names of my most frequented sites. I finally took time to sit down with it again last night and have found that Bookmarks will be a huge help. If I could only get ALL of my favorite pages to work...None of the stuff in " http://kb.mozillazine.org/Locked_or_damaged_places.sqlite " helps. I have tried and tried and I have even wipe the computer clean still didn't help. I got the same problem as he/she has got in the first posted. Can add some web pages but not all the web pages I want.. I should have never updated to 3.6.13... That's when it all started for me, from that version..... Now Version 3.6.14 is out, I was hoping the version 3.6.14 might would fix the problem wrong again....
Funny thing is i can not even Bookmark Firefox.com!!!!!...lol
So any ideas on how to fix it other than the link giving would help.
Thanks. -
I am doing the training video as this is the first time i have used premiere pro cc or any version of it at all. I have downloaded the footage and stills as shown in the video but when i go to double click the beach footage it comes up as black - i can hear the waves but the video isn't playing. Same with the stills, they do not show up when double clicked either, they are just black. Dont know what to do. Your help would be greatly appreciated.
CheersWithout a screen shot, it's hard to know why the footage/stills are black. Double-clicking the asset opens it in the Source monitor, as opposed to the Project monitor, which could be black if the playhead is not set to a portion of the timeline that shows a movie clip or still. Perhaps your Source monitor is closed or hidden for some reason. After double-clicking the asset, select Window > Source Monitor in the main menu. You should be able to select the specific asset (e.g., Shot_01.mp4) and then see it on the screen. Make sure you also select Window > Workspace > Editing so that your panel layout shows the various panels properly.
HTH,
Stefan -
How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Pictures in Photo are over-lapping. Yet when I double click the picture, the correct picture appears. How do I fix this?
Sounds like corrupted thumbnails. First try this: Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4.
3 - if that doesn't fix the problem rerun with Option #2. It might take more than one attempt.
OT -
I cannot open files attached to an excel spreadsheet. I am using office for mac 2011. when double clicking object I only get the picture modifier windows.
Preventing Microsoft Office to open recent documents at startup in Mac OS, Please see:
http://www.frenchguys.com/wordpress/preventing-microsoft-office-open-documents-startup-mac-os-lion/
It seems that the solution works for most people.
In a terminal, enter the following:
defaults write com.microsoft.Excel NSQuitAlwaysKeepsWindows -bool false -
The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking. How do I make the voice stop and my IPAD work again.
If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither -
Whenever I try to insert an email address or a link to a website, I no longer get the automatic hyperlink (turning blue and underlining). Also if I try to change the font color on some text it either doesn't change from black or it changes to a different color. (If I try to change to red, I get dark green; change to a bright green, I get dark red; change to blue or yellow, I get black).
I tried removing and reinstalling Firefox to no avail. Earthlink is clueless.
This all works properly using Internet Explorer.When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies (save any pending work first) using either of these. While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?
These features rely on JavaScript, and it sounds as though you have scripting enabled if you get (the wrong) color changes. Some add-ons might alter the way scripts operate, so a standard diagnostic to bypass interference by extensions (and some custom settings) is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode."
If those features work correctly, this points to one of your extensions or custom settings as the problem.
To also disable plugins, you can use this page:
orange Firefox button ''or'' classic Tools menu > Add-ons > Plugins category
Any change? -
Wrong file icons - files won't open when double-clicked
Hello,
I have a the following problem on a powerbook.
Most picture files (JPGs, but not bearing the .jpg extension) are not reckognised any more by the system.
In fact, they bear an icon of Terminal exec (a black square with a green "exec" note in the corner).
When double-clicked, they don't open in Preview any more, they act as a terminal app, and won't launch, obviously.
The only way to open them is to go the hard way : in Preview, File menu, Open...
Another way is to change their names by including the ".jpg" extensions, which seems to wake up the id from the system and place back the correct icon and app link. But we have 1000's of pictures...
Painful.
We tried rebuilding OS X desktop, repairing permissions, and update prebinding (using the excellent ToolsX 3.4). No results yet.
Any idea someone?
Thanks,
Powerbook 17 1GHz Mac OS X (10.4.3)Have you tried selecting a picture, doing command i, for info, then in the info window setting the app for that file as Preview then clicking Change All?
Does ToolsX have a "Rebuild Launch Services database" function
or an update for "whatis" and "Locate" databases? -
Audio and video don't open together in viewer when double clicked
Hello everyone!
I'm having an annoying problem... it isn't something terribly important, but has decreased my work flow speed. Recently, I've had some trouble opening clips from the timeline in the viewer with the double click.
If I double click the video portion of the clip, even if both the video and two audio tracks are highlighted (and are still linked) only the video portion of the clip will appear (along with "filters" and "motion" tabs) in the viewer, and similarly when double clicking the audio tracks, though both video and audio are highlighted, only the audio tracks and "Filters" tab show up in the viewer. Additionally, once the item is double clicked at the left with the jigsaw pieces that can be used to set video and audio destinations, if I've clicked on an audio portion so only audio shows up in the viewer, only the jigsaw pieces for the two audio tracks (a1, a2) are visible, video track (v1) is no longer present, and vice versa.
I'd appreciate any advice that you all have! It's really driving me batty, in addition to not knowing what I did to make it that way, I can't figure out how to change it back!
HeatherThanks for the advice.
The clips already appeared to be linked, and the selection "link" was checked, however when I unlinked and then relinked I found that the audio and video would open up at the same time in the viewer... problem apparently solved! However, the clips I had been working with I had to nudge audio and video a few frames apart (out of sync) to get the audio and video to line up. (gives the little red box with a +or- number in it on the clip).
When I unlinked and then relinked, the clip lost those red boxes and went back to being synced (as far as FCP is concerned) with the audio and video unaligned.
So, the problem appears to be coming from when I move the audio and video of a clip out of sync... why is this? Is this something I'm just going to have to deal with?
Thanks
H -
Like i stated i'm having a problem with every time i type into a search bar or box of any kind including log ins and such the box turns blue, and in many cases makes it so i can not read what i am typing. Tried same website on IE and they worked fine so i assume it's firefox, is there anything i can do about it
For me, the google search bar turns blue once I've typed in a search term, but then want to click on it again to change or add something. The entire bar turns blue. I can still type, but it's hidden. Then when I click Search, it does bring up my search results and now the terms I've written are showing in the search bar, with no blue.
The only way to get out of it when the blue is there, is to reload the page. -
Problem while displaying the data when double clicked on JTable element
Hi All,
i have one List box( JList ) and one table (JTable). Both JTable and JList are positioned on the same Frame. I am able to drag the elements from JList to JTable and also i have added the mouse click action on both List box and JTable.
if i double click on JList element, that will popup one dialog box.
if i double click on JTable cell element that was dragged from JList, that will popup same dialog box which was opened earlier for JList action.
But my problem here is:
Suppose if i drag the four elements one by one from JList to JTable and (after four elements dragged) double clicked the first element which was dragged first that displayed the popup dialog box structure correctly but the data displayed in that was not correct. It is showing the data of recent dragged element( i.e, fourth element).
But if i double click on JList element that is showing the correct data according to the double clicked element.
What might be the problem here, why it was not displaying the correct data when double clicked on JTable element.
Please help me here.
Many thanks in advance.
The following code is used in mouse clicked event method of JList
private void listMouseClicked(java.awt.event.MouseEvent evt) {
if(evt.getClickCount()==2){
AssigningResourcesUI assignResource=new AssigningResourcesUI(this,true);
assignResource.show();
} AND The following code is used in mouse click enevet method of JTable.
private void tableMouseClicked(java.awt.event.MouseEvent evt) {
if(evt.getClickCount()==2){
int row=table.rowAtPoint(new Point(evt.getX(), evt.getY()));
int col=table.columnAtPoint(new Point(evt.getX(), evt.getY()));
if(row==-1||col==-1){
return;
Object obj=table.getModel().getValueAt(row, col);
if(obj==null||(obj.equals(""))){
}else{
AssigningResourcesUI assignResource=new AssigningResourcesUI(this,true);
assignResource.show();
} Thanks & Regards,
Maadhav....
Edited by: maadhav on Jul 1, 2009 7:22 AMI doubt it is related to your problem but:
int row=table.rowAtPoint(new Point(evt.getX(), evt.getY()));Why are you creating a new Point? Just use evt.getPoint().
Object obj=table.getModel().getValueAt(row, col);Don't get the data through the model method, get the data through the table method:
Object obj = table.getValueAt(...)
This way it will work even if the table happens to be sorted.
Instead of creating a AssigningResourcesUI object, just disply the value retrieved from the model. That way you know whether the problem is with the mouse event code or your UI class. Like Walter suggested above I"m guess the problem is with your UI class. -
IE Script error when double clicking on a view in Abap Webdynpro component
Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
BhupendraHi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy
Maybe you are looking for
-
Availability Check at Storage Location Level.
Hi All, Currrently we have the availability check functionality happenin at the plant level. If the stock is available in the plant, then the sales order is getting confirmed. But, the requirement is if the stock is insufficient then system should ch
-
I would like to know how can I have the templates from premiere as customer of adobe creative cloud
I would like to know how can I have the templates from premiere. I am Adobe Creative Cloud member. Thanks Dmitre Raposo
-
My display suddenly is washed out - can't even set the native white point in Calibrate - any suggestions?
-
My brain is fried today, for some reason I can't figure this one out. I want to delete all the records in a large table where the value of a DATE column is between June 13 at 2 a.m. and June 13 at 3 a.m. NLS_DATE_FORMAT DD-MON-RR Preliminary: select
-
PeopleSoft 9.1 Expense Prepay Auditor
We are currently in the process of upgrading from 8.8 to 9.1, and in 8.8 for Expenses, our Prepay auditors had the ability to review and reject any expense report, even if the expense report was not flagged for audit. My understanding is that in 9.1,