When downloading i-tunes 11 it will not load and gives me the error code:MSVCR80

unable to download i-tunes 11. get error code MSVCR80 -unable to open i-tunes

Hi Wugger,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926?viewlocale=en_US
Cheers,
- Judy

Similar Messages

I tunes store will not load completely there is no error code either

I tunes store is not loading bar gets half way then stops there is no error code.

My Classic on Windows7 also started the same iTunes Store half load & freeze, or blank page, a couple of weeks ago. I tried an old computer with XP and iTunes Store loads on the same LAN! After trying diversions from support (uninstall/install, etc.), they suggested paying for support.
I see by these discussions that I am not alone. Let's hope that they realize that we cannot buy if they do not fix it.

My phone is 2 weeks old and would not update/sync this morning, told me I would have to restore. It will not resotre and gives me an error code 17 and 56? I have the latest version of I tunes on my computer and am not sure what to do with this

Does these error codes mean that I have to replace my brand new phone. Should I go into Verizon, or take it straight to Apple???

It's possible there is a problem with the server you are syncing to. I'd wait a bit, try again a little later.

After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

My itunes will not open and gives me an error message

My itunes will not open and give me an error message of 126... PLEASE HELP

Hello, sarahehines.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

When i open safari, it will not load and the color wheel spins

When i open up safari, it will not load anything and the color wheel spins as long as safari is open. Not sure what to do.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

Since installing the latest update, Firefox will not load; it gives me the following error -- XML Parsing Error: not well formed.

since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
XML Parsing Error: not well formed
locations chrome://browser/content/browser.xml
Line Number 1191, column 20:
utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
3. there may have been other errors, but I did not find them.
How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
Thanks,
NOEL

Some how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none

After doing a suggested update of itunes on my pc it will not open and gives me a msg saying msvcr80.dll is not on my computer and windows error 126 has occured

After doing an update of itunes on my pc Itunes will no longer open and gives me a msg about MSVCR80.dll not on my computer and Itunes was installed incorrectly error 7 (windows error 126)

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

HT2433 Emptying my trash will not execute and I get an error code -8003. What is wrong and how do I resolve.

When trying to empty my trash, it will display the pop-up bar, which seems to indicate it is working, but will not empty the trach, then displays an "Error -8003" and asks if I want to STOP or CONTINUE. Trash will not empty.
Not sure what is wrong or how to resolve.
Any feedback would be appreciated.

Hello, might you have deleted some Time Machine backups in the Finder rather than in TM?
Solving Trash Problems...
http://thexlab.com/faqs/trash.html

HT201413 I work at a school and I have been restoring ipads. This one particular ipad will not "restore" can i override the error code (9)?

I need help restoring an ipad. I have done two others previous to this one however when trying to complete theis one gives me an error message of (9). Any ideas?

Do you have the latest version of iTunes? Did you check for anti-virus software? One of the sections talks about interference from anti-virus software and firewalls. Also, you should not have to make any changes to your Host file unless your computer has been used to jailbreak a phone. I worry because you were using a number of software applications that are designed for jailbreaking devices. Excerpt from this support document. Get help with iOS update and restore errors - Apple Support
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

My 5510 printer will not print to give me the printer code for e print!

my printer will not let me print my code so i can set up e print. It keeps saying unable to connect to server? any ideas why?

How do I find my printer code on my HP5510

I am trying to burn a CD from a playlist in iTunes. I set everything up, and then when it tries to burn, it cancels the burn right away, and gives me the error code: 4251. What am I doing wrong?

Okay, so I wanted to burn a CD to play on players in the house. The songs on my playlist are from CDs that I own and imported into my iTunes. Here are the steps I've taken:
1. I created a playlist
2. Selected File > Burn Playlist to Disc...
3. My Burn Settings are as follows: Maximum Possible Speed (I have tried all the other speeds as well with the same result), Audio CD (No gaps between songs), Use Sound Check is selected, Include CD Text is selected (I have also tried unselecting these two options).
4. Then I clicked Burn
5. Within a couple of seconds "Cancelling Burn" shows up in the window at the top of the screen, and a box pops up that says: The attempt to burn a disc failed. An unknown error occurred (4251).
I have tried different CDs, I have changed all the settings in the Burn Settings box, and I get the same result over and over again. I researched the error 4251, and it refers to a problem with importing songs from a CD. This is totally irrelevant since I'm not trying to import, I'm trying to burn. This is a blank CD, and it is a CD-R. These CDs are off a tower I purchased less than a month ago, and have had absolutely no problem burning other things to these CDs. I really don't want to have to re-import these songs to Windows Media Player or another application just so I can burn what I want onto a CD, but this is almost the point I am at.
iTunes certainly isn't helping me much at this point, and I would appreciate any feedback into what I am possibly doing wrong in trying to create a CD.

I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.

My itunes will not work and this is the error message. Problem signature:   Problem Event Name:     BEX   Application Name:     iTunes.exe   Application Version:     11.0.1.12   Application Timestamp:     50c8fc7e   Fault Module Name:     QuickTime.qts_un

Problem signature:
Problem Event Name:          BEX
Application Name:          iTunes.exe
Application Version:          11.0.1.12
Application Timestamp:          50c8fc7e
Fault Module Name:          QuickTime.qts_unloaded
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          4ea5d609
Exception Offset:          653f1040
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.768.3
Locale ID:          1033
Additional Information 1:          0a9e
Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
Additional Information 3:          0a9e
Additional Information 4:          0a9e372d3b4ad19135b953a78882e789

I am encountering the same thing as I am trying to restore my iPhone. How to fix this? I tried repairing iTunes. Still having the issue.

When i try to launch premier pro, it says error and gives me the error code 1. what does this mean

and how do i fix it

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

I run mac os 10.4.11 and firefox 7 will not open, and I get an error message saying firefox is not supported on this version of mac os. is there a different version I can download? Am I missing something?

firefox used to work no problem, I updated firefox a few month ago, now firefox will not open and I get the error message as above

As of Firefox 4.0 and newer one needs both OSX 10.5+ and a Intel Mac.
The last version to work on a Intel Mac using OSX 10.4.* is Firefox 3.6.*
http://www.mozilla.org/en-US/firefox/all-older.html
http://www.mozilla.org/en-US/firefox/7.0/system-requirements/
http://www.mozilla.org/en-US/firefox/4.0/system-requirements/
http://www.mozilla.org/en-US/firefox/3.6/system-requirements/

When downloading i-tunes 11 it will not load and gives me the error code:MSVCR80

Similar Messages

Maybe you are looking for