When downloading, says iTunes Setup is not a valid Win32 application.

When downloading, says iTunes Setup is not a valid Win32 application. How can I fix this?

In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Similar Messages

  • TS3074 When trying to install itunes on my windows 7 computer i get the error itunes setup is not a valid 32bit application.  Any ideas to rectify please?

    When ntrying to istall itunes on my windows 7 computer I get the error message pop-up "itunes setup is not a valid 32bit application" . Can anyone help please?

    Let's try the following document with that one:
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • 'mymusic/itunes.exe is not a valid win32 application' **help needed** !!

    As i double click on the desktop shortcut to open itunes, i get an error message which is the following: 'mymusic/itunes.exe is not a valid win32 application'. I now cannot access itunes or any of my media/music!
    Background... I updated to the latest version of itunes, downloaded a few apps and music and re-synced my iPod touch. I then clicked on itunes store, and itunes just closed down and would then not reopen and now repeats the error message everytime.
    I have attempted to repair itunes by downloading the setup software again, i have also tried removing itunes from my pc with the intention to re-install all over again, however it wont let me uninstall itunes either!!
    Anybody have any suggestions?

    Can you open iTunes if you go to Program Files\iTunes and double click on iTunes.exe.
    If so, you can create a new short cut by right clicking on iTunes.exe and selecting Send to>>Desk top(create short cut)

  • TS1406 I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

    I read all of this, and did each step and mine still doesn't work. It still says "iTunesSetup.exe is not a valid Win32 application". What's next?

    Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

  • Itune download never start &''itunessetup is not a valid win32 application"

    ok so i have tried downloading itunes 64 bit using IE8. didn't work
    downloaded it using chrome: worked after a few tries
    but then "itunessetup is not a valid win32 application"
    i have read every single article on both problems and nothing i do will help it.
    i downloaded firefox
    but the download just won't start
    i have the same problems with downloading safari as suggested in other feeds

    ok Apple Software Update stops at first 2.60MB of itunes download.
    i know have IE8, chrome, firefox and safari.
    these are my results from when i attempt to download itunes64:
    IE8:download dialog box opens but download never starts
    Chrome:download successful, but then 'itunessetup is not a valid win32 application" dialog box opens. i went into properties and hit "unblock but the same message appears again"
    Firefox:download dialog box doesn't even open
    Safari: stops at 85KB and download speed drops to 0 kb/s from 220+ kb/s

  • When I try to open Firefox 4.0 I get an error message saying that it is not a valid Win32 Application. What do I do? I am using Windows XP Sp3

    I downloaded Firefox 4.o exe. When I tried to open it I got an error message stating that it was not a valid Win32 application. I am using windows XP SP3. How do I get it to open?

    [[Firefox is already running but is not responding]] has steps that you can try. It sounds like you may have something that is hanging your browser on exit (probably an extension or a locked profile) and the steps on that page should help clear it up.

  • It says 'iTunesSetup.exe is not a valid Win32 application.'?

    The way my company has set up software installs means we have to save any application to the hard drive and then run it from there.  It's supposed to keep unwanted stuff from being loaded onto computers by less than tech savvy users, but it makes it hard to load even innocuous things like iTunes.
    When I 'save' instead of 'run' from the applet, I get a very brief download (comparatively) and then when I try and manually run the .exe file, I get the above statement in an error message.  If I select 'run' from the intital download popup, it takes much longer to download, but then can't load because it's not been run with admin privledges (which you do get if you download an application file first and then manually 'run' the install).  I suspect the two options don't give you access to the same files, but how can I download the actual install program to run it manually?
    Ariel

    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • Can't open FF. Says "firefox.exe is not a valid Win32 application."

    When I click the Mozilla desktop icon, I hear a "beep," and the pop-up with a red "X" says... "firefox.exe is not a valid Win32 application."
    That's as far as I get.

    This suggests that the installer has been damaged during downloading.
    One thing you can try is using a different browser to see if that helps.
    If you are in Australia this has been associated with using a USB Dongle connected to a wireless broadband provider.
    It seems that routers can also cause the problem.
    The simplest thing is to get a friend to download the installer for you and put it on a USB stick. Preferably a copy they know works.

  • TS3212 When I try to update my Itunes I get an error itunes setup exe not a valid Win 32 application.  I have a new phone and I cannot register or sync until I upgrade Itunes.  Any suggestions.

    I cannot get my Itunes updated to the 10. that is required for my new Iphone. The error is itunes setup exe not a valid Win32 application.
    Can someone please help me out, I really need to get this phone up and working.

    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

  • ITunes set up gives an error message saying not a "valid win32 application"

    I am using Windows 7 and trying to download iTunes, but when I try to open the iTunes set up it gives an error message saying that it is not a "valid win32 application". It does the same for downloading quicktime. I have no idea what this means or what to do about it.

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Error installing itunes 7.0.1..itunes.exe is not a vaild win32 application?

    I have the latest verion of XP Pro but cannot install he itunes 7.0.1 i just receive this error message ?
    itunes.exe is not a valid Win32 application.
    Appreciate any support.
    best regards,
    tafta
    Compaq presario   Windows XP Pro  

    Hi Roy B
    The 7.1 just would not install at all, giving the error message above every time. 7.0 was still on my system.
    I did a disk clean up (someone said there might be fragments of my attempts to download 7.1 in temp folder that needed to be removed). I then ran a spyware scan and a full Norton system scan (just to be sure that I was 'clean' before attempting again). Then ran the registry mechanic that I just purchased and allowed this to 'fix' anything it found.
    Finally I then went back to apple.com and tried another install from scratch - which worked! So...one of the above things worked - can't be certain which, but my guess is that it might have been the reg. mech.
    7.1 has been working for a couple of days now... but dreading 7.2 etc...!
    Good luck sorting out your probs...
      Windows XP  

  • Blackberry Desktop Error - Not a valid Win32 Application - HELP

    Hi, I have tried to download several versions of the blackberry desktop software and I keep getting an error saying the executable is not a valid win32 application. 
    I am using windows 7 and tried to run the executable as administrator.
    I also tried to run the CD which came with the phone, and it gets to the install button and nothing happens.

    Hi and Welcome to the Forums!
    Here is a KB that discusses that error:
    KB03490Internal Error 2738. Could not access VBscript appears when installing BlackBerry Desktop Manager
    Hopefully it contains something useful!
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • When I go to download itunes onto my computer it says its not a valid Win32 application.

    I have been trying to download itunes onto my computer. I have 2 one is xp service pack 3 and the other is vista. I mostly use the xp, but I cannot dowload itunes onto either computer. It says its not a valid Win32 application. I was wondering if anyone could help me out with this problem so I can download itunes. Thanks in advance.

    That suggests that the installer is getting damaged during the download.
    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Everytime I try to download itunes I get a message that says its not a valid Win32 application

    Everytime I try to download iTunes on my computer it says it is not a valid Win32 application. Also, when i plug in my ipod, iPhone4S, or my iPhone5, they show up as cameras instead of phones and iPod. How can fix these issues?

    Hi there,
    I would recommend taking a look at some of the troubleshooting steps found in the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W.

  • I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application  How can i download i

    I have switched offices and computer. may I still access my old tunes? next, I get an error when trying to download Itunes to my new compuet: c:\DocumentsandSettings\aabugattas\desktop\itunessetup.exe is not a valid Win32 application  How can i download it?

    In the course of your troubleshooting to date have you worked through the following document?
    iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Maybe you are looking for

  • How do I pass a field value from one form to another?

    Hi, Please help me. First application. I have login form. One field P48_USERNAME, no password required. Enter the User name and press Login button. The Login redirects to page 4. On Page 4, I need to populate a hidden field called user with the value

  • How to deploy mar file in weblogic

    Hi, I have a mar file present in an ear file. This mar file is used by ESS ( enterprise scheduler service ) . It has some xml files which defines the job/job definitions which we can schedule. I try to deploy the ear having mar file to weblogic. But

  • REPORT_ATTRIBUTE_ERROR_MESSAGE functionality for Input Field & Drop down UI

    Hi, We have requirement to handle error messages. In a data input form, if we get multiple errors we are displaying all errors in a message area. When we click on error message, focus should go to the UI element which causes to the error. We have use

  • HTML (Editor) region should scroll vertical only

    Hi, I have a HTML Editor . I want to restrict the width of it. I mean I want vertical scroll only, not horrizontal. For long sentences,it should go to next line after limit . Thnx in adv.

  • Datapump network_link questions

    I had a few high level datapump questions that I have been unable to find a straight answer for and it's been a little while since I last did a large migration. Database will be either 10gR2 or 11gR2. - Since you are not using any files, does the Ora