When editing DHCP Scope in IPAM, get "Error: 5 - Access is denied"

Hello all!
I have a pair of Server 2012 DHCP servers configured for Failover.  I also have a Server 2012 IPAM server that manages the first server in that pair, but not the second one.  The reason is that I have the DHCP Failover Auto Config Sync tool running
on the first server and it can only be installed on one server of a Failover pair.
So, my diagram would look something like this:
IPAM --manages--> DHCP 1 <--Failover/Auto Sync--> DHCP 2
So, here is my problem.  I can make a change to a DHCP Scope directly on DHCP 1 and it is instantaneously replicated to DHCP 2.  That is no problem.
But, when I try to edit the same Scope through IPAM, it fails and returns the following error: (Error:5 - Access is denied.)
Any help would be greatly appreciated.
Thanks!

Hi,
One of our service engineers here was able to reproduce the problem by removing the
IPAM computer account from the IPAMUG security group in Active Directory.
Interestingly, doing this does not change the status of the server from green to red in terms of manageability.
Can you please check and see if this is the problem?
Thanks,
-Greg
P.S. If this is not the problem, please answer a few more questions:
Is the IPAM and DHCP server joined to the same domain?
Are they multihomed servers or have only one NIC?
Are you using the same user account on IPAM and DHCP server?
Note: I tried reproducing this and when the IPAM server is removed from the IPAMUG group it does cause Error 5 - Access is denied, however I was able to get the status to turn red after doing this. I think it is critical that an Active Directory update
occur, so you should try running gpupdate /force on your DC, DHCP server, and IPAM server.

Similar Messages

  • Reading Mount Information getting Error 5 Access is Denied

    Dear SAPgurus,
    I am trying to install SAP ECC 5 IDES version from windows server 2003 OS, the central instance installation is giving error "Access is Denied" While reading mount information for C:\.
    While my windows server 2003 is installed on drive D. I am having windows Vista on Drive C:\ which is preloaded while buying laptop.
    I am logged in as Built-In Administrator user id.
    The message in the log looks like this:
    Trace
    reading mount information for 'C:/
    Error 2007-11-06
    FSL-06002 Error 5 (Access is denied) in execution of a 'FindFirstVolumeMountPoint' function, line (439), with parameter (
    ?\Volume(e0eeecd3-8a43-11dc-bda5-806e6f6e6963)\)
    Error
    MOS-01235 Module function getInfo of module CIA0smount failed.

    I have the same problem.
    I bought my machine with Vista preloaded. I installed Windows 2003 on it. - using a fresh 2003 Enterprise Server Windows 2003 disk.
    Now, While installing the SAP R/3 4.7x, I am getting the same error. Do you all think that I should add the permissions to SAP id's and then try. I am doing all the work as the system administrator. I also gave full permissions to all the drives. But one thing I did not do is to create partitions.
    I have C: Drive and H Drive.
    I installed my Windows 2003 on H drive and I now want to install SAP on the C drive. Would that be a problem.
    Here are my details:
    Machine: 2003 Enterprise
    RAM: 5 GB ( Yes, It is 5 )
    Hard Drive: SATA RAID Intel
    Partitions: C: ( 220GB) and H: 10GB
    Database: Oracle 9.2.1 with patches
    SAP: 4.7x
    I keep getting the Access denied error all the time.
    Please help.
    SAPuser.

  • IPAD2 - When i update my apps i get error message 1004.

    IPAD2 - When i update my apps i get error message 1004. OS is actually 4.3.5.
    Still get error when i connect thru pc.
    I have powered off and retried - still fails to update

    This seems to work for some users ...go to Settings>Safari>Clear History, Cookies and Cache. Restart the iPad. Hold down on the sleep button until the red slider appears and slide to shut down. Hold the sleep button until the Apple logo appears to power up again.
    Then try again.

  • TS1718 I tried to update, did not work, unintstalled did not work.  Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable.  Looking for itunes64.msi path.

    I tried to update, did not work, unintstalled did not work.  Now when I try to install i get error message "The feature you are trying to use is on a network resource tha is unabailable.  Looking for itunes64.msi path.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • HT1199 when attempting to empty trash i get error code of 8003

    when attempting to empty trash i get error message 'the operation cant be completed because of unexpected error occured error code 8003'
    thanks!

    http://www.thexlab.com/faqs/trash.html
    27" i7 iMac 10.6.8 , Mac OS X (10.7.3), G4 450 MP 1.5 GB RAM w/(10.5.8/10.4.11/9.2.2)

  • I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.

    I have created a slide show with pictures and music in Iphoto and when I try export it I get Error You do not have sufficient permission for this operation.  Try to export to an external HD attached, all help would be gratefully received 

    Have you ever successfully saved anything to that external drive? My first two thoughts are that the drive isn't formatted for the Mac or that you don't have rights to save to the drive.

  • Update my iphone 4 and when I go to restore I get Error -50, let me know as I do that without asking for the support that made itunes

    update my iphone 4 and when I go to restore I get Error -50, let me know as I do that without asking for the support that made itunes
    currently I have no information on the phone and I need contacts urgeten

    If the previous owner bought the apps then they would have to be updated using his/her account.  The apps are not yours.  You would need to buy your own.

  • "error: \lib (access is denied)" when trying to deploy

    I have a sql server stored proc that I have successfully created the artifacts for as specified in documentation I had rec'd in a prior thread. Now, when I go to deploy, I immediately get the error:
    "error: \lib (access is denied)"
    I have verified the path to the lib folder as specified in my genterate.bat file to create the artifacts. It is shown below. I am not sure what I need to do.
    SETLOCAL
    @echo Generating BPEL artifacts for %1
    @echo off
    @echo off
    set PROPERTIES=DCSD_SIPA_FEE_UPDATE.properties
    set J2EE_HOME=C:\golden_lam\JDeveloper\JDeveloper_10.1.3.3\jdevstudio10133\integration\lib
    set OC4J_HOME=C:\golden_lam\JDeveloper\JDeveloper_10.1.3.3\jdevstudio10133
    set JDBC_HOME=C:\golden_lam\JDeveloper\JDeveloper_10.1.3.3\jdevstudio10133\lib
    set JDBC_DRIVER=%JDBC_HOME%\sqljdbc.jar
    set JAVA_HOME=C:\golden_lam\JDeveloper\JDeveloper_10.1.3.3\jdevstudio10133\jdk
    set JAVA_CLASSPATH=C:\golden_lam\JDeveloper\JDeveloper_10.1.3.3\jdevstudio10133\lib
    set ARTIFACTS_CLASSPATH=%MY_CLASSPATH%;%JAVA_CLASSPATH%;%J2EE_HOME%\DBAdapter.jar;%J2EE_HOME%\bpm-infra.jar;%J2EE_HOME%\connector15.jar;%J2EE_HOME%\orabpel.jar;%JDBC_HOME%\xmlparserv2.jar;%OC4J_HOME%\toplink\jlib\toplink.jar;%JDBC_DRIVER%
    "%JAVA_HOME%\bin\java" -cp "%ARTIFACTS_CLASSPATH%" oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts %PROPERTIES%
    ----------------

    at which step do you try to navigate or generate something to this lib folder? (can you paste that code? )
    you do this by using a full path or relative ?

  • Jsp error Message: Access is denied. on customers IE7 and IE8

    Hello,
    Here is a thing:
    Customer getting js error in IE7 and IE8. Firefox works fine.
    I am not able to reproduce on internal machine with ie8. also internally all works in ie9 (also in browsing modes ie7, ie8). and of course firefox works great internally as well.
    Error happens when they navigate back to caller page from popup page (SelectPG) by selecting not partial action. When they click on the commandImageLink popupPage get blanked (get white with no any information on it) and stays and IE showing yellow exlamation mark in the bottom left corner with error:
    Message: Access is denied.
    Line: 1
    Char: 53
    Code: 0
    URI: http://cusomer_host:7001/product/faces/selectFlow/SelectPG?_adf.ctrl-state=1paop64rm_38
    SelectPG is inside bounded taskflow which is ran as dialog from caller taskflow.Popup page SelectPG opens fiine and all information is displayed correctly, they can see table with all information do filtering on table etc...
    i dont have access to customer enviroment. and i am not able to reproduce this on any of our internal enviroments.
    kind of stuck here will appreciate any thoughts/hints/suggestions.
    thanks in advance!

    and it seems that to reproduce this - you can run any of your application which have taskflow's <inline-popup> with this kind of link:
    a href="http://weblogic:7101/yourproduce/faces/yourPage.jspx" target="_blank">go to your application </A
    for some reason target="_blank" makes popup not to be closed throwing the Access is denied error.
    Do you know if there is any patch for this? (updating jdev version is not the option)
    Edited by: user1175340 on Oct 4, 2012 8:03 AM

  • Error 5: Access is Denied While using OSCDIMG to create Winpe x86 ISO with Deployment Tools Command Prompt

    Technician computer is Windows 7 HP x64.
    Running latest version of WAIK.
    Goal: To make a Winpe disc for each processor architecture (AMD64, x86, IA64) with an included Gimage.exe using this code for the default startnet.cmd file found in system32 directory of winpe boot.wim
    wpeinit
    if /i %PROCESSOR_ARCHITECTURE%==amd64 (
    cd x64
    start gimagex.exe
    if /i %PROCESSOR_ARCHITECTURE%==ia64 (
    cd x64
    start gimagex.exe
    if /i %PROCESSOR_ARCHITECTURE%==x86 (
    cd x86
    start gimagex.exe
    These are the commands I have processed for the x86 variant:
    copype x86 c:\pe\x86\
    Dism /mount-wim /wimfile:C:\pe\x86\winpe.wim /index:1 /mountdir:C:\mount
    **It is at this point I copy over my x86 folder, x64 folder, and overwrite the startnet.cmd file.
    dism /unmount-wim /mountdir:C:\mount /commit
    oscdimg -n bc:\pe\x86\etfsboot.com c:\pe\x86\iso c:\pe\x86.iso
    ^^It is at this command I receive this error:
    ERROR: Could not delete existing file "c:\pe\x86\iso"
    Error 5: Access is denied.
    Please note that all commands before were hand-typed, no copy or pasting from any directory or .chm
    One thread referred to some Application Management service, but I can report that there is no such service installed in my machine.
    Thank You!
    UPDATE:
    I copied the winpe.wim file from the x86 root directory into the iso directory and renamed it to boot.wim Now, if I copy the contents to a flash drive and put it into a client
    computer, it boots to the PE perfectly, script and all.
    However, when trying to use the oscdimg command, I do get an .iso successfully, but when I burn it, I don't know what to do in the way of boot options, and if I keep defaults (imgburn)
    it results in an un-bootable dvd. 
    Suggestions are greatly appreciated.

    Don't copy and paste instead type manually it will work.
    [email protected]
    OMG! Yes, you are correct ... but I have no idea why! I retyped the command line:
    oscdimg -n -be:\winpe_amd64\etfsboot.com e:\winpe_amd64\ISO e:\winpe_amd64\winpe_amd64.iso
    into Notepad, and then pasted it into the Command Prompt, and it worked!
    Perhaps there must be some hidden characters included when pasting directly, even though I first pasted the command line into Notepad, and then into Command Prompt
    (C:\Program Files\Windows AIK\Tools\PETools>).
    I had to retype the command line in Notepad before copying and pasting, before it would work.
    Wow, thanks!
    Cheers, Navy Flyer

  • Cannot open backup device 'F:\foldername'. Operating system error 5(Access is denied.).

    SQL 2005 Enterprise
    Even if I logon as Administrator and try to backup any of my databases to local partitions, I get this error below. I have been operating fine up until this point and doing backups all the time.  As far as I know, and after checking, no permissions have changed and of course Administrator has ntfs permissions to my local C and other partitions on this server:
    TITLE: Microsoft SQL Server Management Studio
    Backup failed for Server 'servername'.  (Microsoft.SqlServer.Smo)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
    ADDITIONAL INFORMATION:
    System.Data.SqlClient.SqlError: Cannot open backup device 'F:\foldername'. Operating system error 5(Access is denied.). (Microsoft.SqlServer.Smo)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
    BUTTONS:
    OK
    In the Event log for Windows Server 2003 I see this:
    Event Type: Error
    Event Source: DCOM
    Event Category: None
    Event ID: 10016
    Date:  3/6/2006
    Time:  3:35:06 PM
    User:  NT AUTHORITY\NETWORK SERVICE
    Computer: servername
    Description:
    The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
    {BA126AD1-2166-11D1-B1D0-00805FC1270E}
     to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20).  This security permission can be modified using the Component Services administrative tool.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    SQL Service account is DOMAIN\SQLAdmin
    Have given the SQLAdmin AD account access to the Backup shares on the file servers (2 file servers, FILE1, FILE2)
    and I still get the error
    Operating system error 5(Access is denied.).
    RESTORE FILELISTONLY
    FROM DISK = N'\\SERVER\APPS\backups\UA\DB\DB.BAK'
    I trid to attach it as device, which runs
    sp_addumpdevice 'disk', 'Network_Share', '\\SERVER\backup\APPS\UA\DB\DB.BAK'
    BUT when restoring, same error occurred (Access denied)
    Only case I can backup/restore to/from network shares, is from the machines where SQL Server runs (SQL1, SQL2)
    e.g. I copy the BAK file from FILE1 to SQL2, share the folder (add SQLAdmin account with access), then restore on SQL1 with file from SQL2 Share
    RESTORE FILELISTONLY
    FROM DISK = N'\\SQL2\backups\UA\DB\DB.BAK'

  • Server2012: system error 5 access is denied

    I can successfully log in as administrator to this virtual server after connecting through HyperV. The server time is OK. When I run net user from Power Shell, it displays the two existing accounts (admin and guest). When I try and add a new user, I get
    the system error 5 access is denied message.

    Simply do it using an elevated prompt. Do a right click then choose run as administrator
    option before running Powershell. If you still have the access denied issue then double check your local permissions.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentV

    I installed Exchange Server 2010 inside my VMWare Windows Server 2008 Ent R2. And After successful installation  when I try to open my Exchange Server Console, I am getting the following error message. I am very new to Exchange server please help me
    to solve this problem.
    Initialization Failed
    The following error occurred while searching for the on-premises Exchange server:
    [win-.local] Connecting to remote server failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError
    $true -CurrentVersion 'Version 14.1 (Build 218.15)''.
    Thanks Vivek
    SharePoint Foundation 2010 Book
    http://www.redpipit.com

    Hi,
    Please have a look at the article below:
    Troubleshooting Exchange 2010 Management Tools startup issues
    http://blogs.technet.com/b/exchange/archive/2010/02/04/3409289.aspx
    Resolving WinRM errors and Exchange 2010 Management tools startup failures
    http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx
    Besides, please run the cmdlet below:
     set-user alias -remotepowershellenabled$true
    Xiu Zhang
    TechNet Community Support

  • Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.

    Hi Everyone,
    Whenever I install some new software in my new laptop I get this error:-
    Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied.
    I have tried synchronizing the clocks but it doesn't remove the problem.
    These softwares work on another laptop that i have, which also runs windows 7.
    Can someone please tell me the solution as this is extremely urgent.
    Thanks In Advance.
    -Michael

    In short:
    ============
    My permissions were all fine, so if anyone has trouble resolving the issue after sorting permissions then make sure you try fully disabling your anti-virus / anti-spyware / firewall applications, because that was the cause for me.
    In detail:
    ============
    Problem:
    Failed to install this application
    - http://www.ssware.com/cryptoobfuscator/download.htm
    - on Windows 8.1 x64
    - Get error message "Unable To Execute Files In The Temporary Directory. Setup Aborted. Error 5: Access Is Denied."
    First Candidate Solution
    The issue turns out to NOT be security rights on the Temp folder
    ESET Smart Security HIPS Advanced Memory Scanner is the cause
    http://kb.eset.com/esetkb/index?page=content&id=SOLN2908&actp=search&viewlocale=en_US&searchid=1392804914417
    Instead, I went and turned off all the ESS protections one by one and it turned out to be HIPS that is causing this false positive.
    In fact, it is the Advanced Memory Scanner option under HIPS that is causing the error, while the application in question is legit (using Inno Setup and presumably trying to write to the user temp folder, not sure whether just logs or to execute from there)
    Furthermore, Smart Security logs have no entries under HIPS even though I ticked "Log all blocked operations" under the HIPS "Advanced setup" - it was quite a journey to find out the cause :)
    Thank you. I have the same OS and installed ESET Smart Security as well. And it is resolved now.
    I just want to add, that by "Temporarily disable protection" and "Temporarily disable firewall", it doesn't work. You have to disable HIPS, as KristjanL said. 

  • SetDpmServer failed with errorcode =0x80070005, error says: Access is denied.

    We have a Windows 2008 R2 server that we need to move it's protection from one DPM server (DPM2) to another DPM server (DPMTEST1)
    We logon onto the Agent server (one being protected) with with my own Domain Admin account, (Not the Domain Administrator Account) an run the following command: and get Access denied.
    C:\Program Files\Microsoft Data Protection Manager\DPM\bin>SetDpmServer.exe -dpmserverName DPMTEST1
    Configuring dpm server settings and firewall settings for dpm server =[DPMTEST1]
    Configuring dpm server settings and firewall settings for dpm server =[wellspan.org\DPMTEST1]
    SetDpmServer failed with errorcode =0x80070005, error says: Access is denied.
    Please make sure that you are a domain user with administrator privileges on this computer
    If I log out and back in with the Domain Administrators account and run the same command. It completes successfully.
    My own Domain account has administrator privi's to all servers.
    I'm not sure what I'm missing and what would cause this.
    Any help would greatly appreciated.
    Rick
    Rick Dixon

    I have this issue on a Domain Controller.
    Local Admin doesn't help but i am Domain admin.
    any further advice ?

Maybe you are looking for