When EOS Utilities will be able to work with Mavericks

I´ll try to open EOS utilities for CANON but itsays " Cannot be used with this version" , can you guys help me?

Milapoly wrote:
Where I can get any answers when it will work? 
Unfortunately it's not possible to get such answers.  You just have to wait until Apple announces an update.

Similar Messages

  • WHEN AVID MBOX 3 PROTOOLS EXPRESS GO WORK WITH MAVERICKS OR YOSEMITE ???

    WHEN AVID MBOX 3 PROTOOLS EXPRESS GO WORK WITH MAVERICKS OR YOSEMITE ???
    PLEASE HELP US AND SHOW ONE RESOLUTION.

    Apple wouldn't know Avid's development cycle.
    And for that matter, neither would us users.
    You'd have to ask Avid when they are going to fix it.

  • Will Photoshop Elements 9 work with Mavericks?

    I use photoshop elements 9 for my photo application.  Will it be compatible with Mavericks, if I upgrade my operating system?

    Check out this site for compatibility issues.
    http://roaringapps.com/

  • Will my 4GB MBP work with Mavericks and Windows 7 smoothly?

    I own a 13", Mid-2010 MacBook Pro with 4GB of RAM and a 2.4 GHz Intel Core 2 Duo processor. Will this system, given enough hard drive space, be able to run both Windows 7 and the newest OS X Mavericks via Boot Camp without any significant "lag", or effect on performance? I realise it will hurt the performance, but will it effect my ability to use the Mac?
    Also, any advice on using Windows 7 with MOUNTAIN LION instead would be great!
    If my specs do not meet the necessary requirements, any advice on upgrades i should need is also much appreciated
    Thanks!

    That Mac will work without any problem in Mavericks and Windows 7, as it meets the requirements of both of them. OS X Mavericks improves Mac OS X performance in most Macs, but make a backup of your files before upgrading Mac OS X. The same if you use Mountain Lion, but it's a bit older OS X version.
    If you haven't installed Windows 7 yet, follow these steps > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

  • Will final cut express work with os maverick

    I am running mountain lion and FCE. will final cut express work with mavericks.?

    A follow-up to my previous post.  FCE 4.0.1 is working fine with Mavericks on the computer at my church (we use it to video-tape sermons and masses for YouTube). 
    A few weeks ago, I purchased a copy of FCE 4.0 from Amazon (one of only two left).  It would NOT work with Mavericks, and there was no upgrade available on the App Store (the only source of software upgrades with Mavericks).  So, I installed FCE on another iMac running Lion.  It installed just fine, and when I went to "Check for New Software" in "the apple", it found the upgrade to 4.0.1, installed it, I copied it to a blank DVD, and installed that on my iMac running Mavericks.  It is working fine.  (HINT TO APPLE: Can we please go back to the simple "Check for Software Updates" instead of the App Store?  Ever since Steve Jobs died everything Apple has become more complicated, not intuitively simple as he made it.)

  • The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size.  How do I get the thumbnails back to the standard size and be able to work with them?

    The photos in my IPhoto have all become mini-thumbnails and I can't open or edit them. When I print the image it comes out normal size.  How do I get the thumbnails back to the standard size and be able to work with the photo files?

    What version of iPhoto and system are you running?  On the guess that you're running the latest iPhoto, 9.4.2, Try the following:
    1 - launch iPhoto with the Command+Option keys held down and rebuild the thumnails, Option #2.
    2 - It may take 2-3 attempts so don't give up after only one attempt.
    OT

  • Any one know when the iPad4 will be able to read 64gb exFAT memory cards?

    Any one know when the iPad4 will be able to read 64gb exFAT memory cards?

    Currently, the camera connection kit/iPad http://support.apple.com/kb/HT4101 can't read SDXC cards formatted ExFAT, and although not specified in the above link, 32GB cards are the max size. Next week when iOS 7 is released, maybe that will change.
     Cheers, Tom

  • I cant upgrade camera raw and need to to be able to work with new camera files  why?

    i cant upgrade camera raw and need to to be able to work with new camera files  why?

    Boilerplate text from Best Practices FAQ
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
        * Adobe product and version number
        * Operating system and version number
        * The full text of any error message(s)
        * What you were doing when the problem occurred
        * Screenshots of the problem
        * Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • Will the Linksys WRT160N work with windows vista at all?

    Will the Linksys WRT160N work with windows vista at all? 
    Some one please clear this up for me, it could be answered in the simplestterms from the English Language of course.
    I've recently purchased the Linksys WRT160N however after purchase "of course"I manage to find reviews stating that the router will not work with the WindowsVista Premium, or windows Vista for that matter.
    E.g.(Comments like These 'which are not my own')----------
    "When I tried it with a new computer running Vista 64, it would install but the Linksys System Advisor would not. After 1 chat and 4 phone calls with support the system will still not run." 
     "It is a good product with XP, but if you use Vista 64 good luck. After several hours of working to get it running my patience and options have run out."
     "It has taken almost a week for us to figure out that the Linksys Router, WRT160N from Best Buy does not workwith Vista Premium. I looked on-line to Linksys Website and discovered that the router, WRT160N is notsupported for Vista users. .." 
    E.g. (CommentContradicting to what has been said above)------
    "Bought this to replace my outdated Linksys (new Vista laptop) and was blown away. Thisthing practically set itself up. It replaced the wired router and wireless routers I was using, asthe signal strength is awesome. I'm still pulling over 5meg ... "
    So I guess one could see why I am confused, based on the 2 sidedcontradictions pertaining to this router actually working with windows vista ornot.
    So can someone respond (preferable a Vista User) and tell me the truth as of towhat this router can an cannot do in terms of Vista? Thanks 

    It should work with vista without any issues if you are running any software on the computers (64 bit) from linksys it may not work but if you will connect that computer with an ethernet to the router it should work fine.

  • I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with a updated graphics card ??

    I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with an updated graphics card ??

    Sounds just like what was happening with my Alum MB. I took it in and they replaced my battery. It seems to be ok now. I don't know what it is, but my battery was fine before 10.5.6 and the same timeframe of the firmware updates when they came out.
    My battery health was jumping around but was fine before all of this happened. Unfortunately at 381 cycles I don't think you have much chance of getting the battery for free. Perhaps you can complain about the battery saying it was fine until 10.5.6 or whatever. Not sure when your computer was made, but perhaps you are eligible for this program: http://www.apple.com/support/macbook_macbookpro/batteryupdate/

  • Will Photoshop Elements 10 work with Microsoft 8.1 operating system?

    When selecting the option e-mail from the Elements Organizer to share a picture, the program stops with a note from Elements Organizer stating they could not finish creating the e-mail message. I never experienced this problem when it was operating in my older computer running on Windows XP.  Will Photoshop Elements 10 work with Windows 8.1?

    Depends on what e-mail client you're using. I believe that for W8 you need to install the Windows 7 version of Windows Live Mail.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Is Photoshop CC able to work with Bridge CS6 or other CS6 applications ?

    Is Photoshop CC or any other CC application able to work with CS6 applications such as Bridge CS6?

    Asking in the specific forums will give you answers from users of those programs
    Not that Mylenium doesn't know, but this forum is not about using specific programs
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

    will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

    You can setup an Airport device using the Apple Airport Utility for iPhone
    Download it for free in the App Store on your iPhone...
    It's under "Utilities" and the "Top Free" utilities.

  • Will LabVIEW 8.0 work with Windows 7?

    Will LabVIEW 8.0 work with Windows 7?
    Thanks in advance.

    According to this kb, LV2009 is the first version to be supported in Windows 7.  We have had problems getting LabVIEW 8.6 to just install in Windows 7 machines.  You might be able to get it to work, but I would recommend upgrading your version of LabVIEW if you really need to use Windows 7.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Iphone 4 the mike does not work when making a call.  it does work with speaker phone and face time

    Just activated new Iphone 4 and the mike does not work when making a call.  it does work with speaker phone and face time. Any known fixes?

    My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often.  I called her iphone 4 at home from where I work 20 miles away on my iphone 5.  With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries.  This is a 10% sucess rate!!  I also could listen in real time from the wired work phone and the wired home phone.  She turned off 3G mode and it went to "O" mode at  the top left of the screen after the ATT.  In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time.  I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network.  If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring.  If the ring tone does not change after the 4th ring you get voice mail.  If the calling party does not leave a voice message there is never a missed call displayed on the iphone.  If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication. 
    This appears to be related to the time of day and the ATT tower that the receiving caller is using.  Tried other towers and it works in 3G mode 10 times out of 10 tries.  Apple replaced the first iphone 4 with a new phone, no improvement.  ATT replaced the SIM card and no improvement.  ATT so far is clue less.  This has been going on every since we got the new iphones which is 4 months.  The ATT web site also describes this same problem from several years ago.  Has anyone got better information?
    Thanks

Maybe you are looking for