When ever I go into my itunes I get this registered user message for Sprint. Am I doing something wrong?
Whenever I go into my Itunes I get this Registered User message for Sprint. Am I doing something wrong?
What is the exact message?
Sprint has nothing to do with iTunes or iPads.
Similar Messages
-
When ever I try to open iTunes I get this
I have uninstall iTunes and reinstalled it. I all so deleted all the files on my lapto but for I reinstalled it. I need help
It's saying your Windows 7 permissions aren't correct.
Try this, close itunes.
Open Windows Explorer to look at folders. Browse to this folder and try to open it:
C:\users\username\My Music\iTunes
Will it let you?
More things to try are listed in this article
http://support.apple.com/kb/ts1717
Specifically, seeing if you get the same error message in a different windows account. -
When trying to log into face time I get the registering device does not have appropriate credentials after I sign in, I have OSX 10.8.4 on my Mac Pro. I can log into face time without a problem using my IPAD.>
Please take each of the following steps that you haven't already tried, until the issue is reolved. If there's no resolution after Step 3, post your results.
Step 1
Sign out of iMessage in the Accounts tab of the preferences dialog, then sign back in.
Step 2
Log out of your user account and log back in.
Step 3
Boot in safe mode and test, then reboot as usual and test again.
Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. -
I have a macbook pro 15 retina - when ever I connect to bluetooth speaker, I get this loud noise coming from the speaker - if I turn bluetooth off, the noise is now coming from the macbook speakers & stays until i restart.
Hi John. Thanks for that input. At Step 6, after clicking "Next" I get a window telling me my OS version is unsupported and the installation may not complete. I am prompted to go to Canon's web site to "Check Latest Info".
I've had this window on previous attempts and from Canon's web site I downloaded two drivers as follows
- ICA Driver V4.0.0
- Canon IJ Network Tool V4.5.0
I'm not sure if these are the correct / complete drivers I need for this install or not.
I continue to follow all the steps. At step 9 I click "Wireless Set Up using USB" amd get a License Agreement (a little different than instructions)
I click "Agree" and it goes to a Setup window with two progress bars showing the installation. I've not been prompted to connect the USB?
After the Setup window is done, I am then prompted to connect the printer via USB. I connect the printer and click on "Redetect". It is not detected.
I then try following the Canon on screen instructions for connecting to the wireless LAN amd enter the password. It searches and indicates "Connecting" on the window, but it never connects and the blue light just blinks
So, at this point I am stuck??
Thanks
Stephen -
But when I add the clip, it's saying that the clip is at 30fps? Am I doing something wrong?
Let me tell you this: don't worry about it.
No one is able to tell very easily if the video is in 24 or 30 fps. You can only see the difference between, like, 14 and 24 fps. Just dismiss it and move on. It's all fine.
(the only time that I personally need to make sure my camera is shooting at it's highest fps, is when I will be putting the vidoe into slow motion.) -
ipod touch..when I plug in to laptop, itunes comes up and I get this message. "Itunes could not connect to thehe Ipod because it is locked with a passcode. You must enter your passcode on the ipod b/4 it can be used with Itunes" It is stuck on the cord/itunes screen and cannot go any further...HELP
Place the iPod in Recovery mode and then connect to your computer and restore via iTunes.
-
I just got message from AT&T that iPhone 4 is unlock and I need to restore my iphone for unlock but I getting message as " Your iPhone can not be updated or restore . This device is not eligible for requested build" Any help and support is greatly appreciated.
Thanks.Scarykid9 wrote:
So I contacted AT&T and gave them my IMEI number and requested an unlock. After I got the e-mail back saying that it was ready to unlock I followed these steps (and yes it has been 24 hrs since I received the e-mail, in fact it's been over a week now and still no difference);
Back up your iPhone.
When you have a backup, erase your iPhone.
Restore your iPhone from the backup you just made.
I've completed those steps multiple times but I still have yet to see the message saying it's unlocked. Anyone have any idea why this isn't working for me? Do I need a new SIM card from another carrier to make it work? I'm using my old SIM card from AT&T because that's all I have right now. I can't think of anything else that could be causing the issue. Any help is greatly appreciated!
You need to restore the phone (that is, iOS), not the backup. Those instructions have always been ambiguous. After iOS restores you should get the unlocked message, and you can then restore the backup (it should prompt you to). And you need to wait "long enough" after you got the instructions; it can take several days. -
When i try to sign inti itunes i get this message MSVCr80.dll
when i try to access itunes account won't open and gives this message MSVCr80.dll anyone have an idea why
Solving MSVCR80 issue and Windows iTunes install issues.
-
Has anyone had this problem, it just started today?
Hi, Mizzlady1.
Thank you for the question. This error usually means a system library file has been deleted or moved. I would recommend uninstalling all components of iTunes in the order specified of the article below. Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
If you receive any errors during the uninstall process, follow the instructions in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H. -
When ever I try to open Firefox I get this message saying it can not open.
"Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features." I did research on it and I found information on it and it said to to see if the cert6.db is read only and if so unchecked it and restart Firefox, I did that and it did not work same message came up so it then said to delete the file and let Firefox create a new and that should work and it didn't finally they said the fire could be corrupted and to reinstall it I did and it will still not work and i also have over a hundred gbs of free hd space so its not enough room on the hard drive.
There are a few possible causes for that error, for details see [[Firefox is already running but is not responding]].
-
Oh I just was able to restore it, but it got until -"activation error" activation requested could not be completed. if the problem persists, please contact customer care
so now please help!Hey there alicyn!
I have an article here for you that can help you troubleshoot this issue with your iTunes installation on your computer:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for using the Apple Support Communities. Have a good one!
-Braden -
hey i have an ipod touch 5gen ,it has stopped responding and is showing a blank black screen.when ever i connect it to itunes it gives a sound of the connection. what am i suppose to do?(ios7)
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Hey when ever i download and install Itunes then i open it says error finding folder please re download and I tried a tons of times and it didnt work. Does anyone know how to fix this?
Hi Beege140,
I have an article for you that will help you address this launch issue with iTunes:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden -
I am using a Windows 7 laptop, 64 bit. When ever I try to open iTunes, it immediately freezes and says "iTunes has encountered a problem and needs to close." I have tried uninstalling then reinstalling, and also going back to previous versions. Any ideas as to how to fix this? Thanks!!
You need to remove all installer file, uninstall iTunes and all related programs, then do a clean install.
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I have backed up my old phone to itunes, however, when I try to restore data to my new phone it is saying the password is incorrect but I can get into my itunes account with my password so I am doing something wrong?
I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)
Maybe you are looking for
-
How do I setup shared variables between executables created in sepparate projects
Hello, I have several sepparate projects with their own respective executable files and I would like to be able for these executable files to all share the same variable (one program controls the value of the variable, while the others read from it).
-
Accounting doc entries not matching with the the entries from j_1ipart2 entries
Hi, After creating PO, I have done MIGO and J1IEX. Now, posted MIRO. The end screen shows a number stating accounting document created. I checked the accounting doc in fb03 and the document is displayed over there. I also checked the table for values
-
Service process is running in code page [MS Windows Latin 1 (ANSI), superse
All, I am trying to create Integration service, getting errors on Windows. Can anyone tell me where exactly where the service process is pulling the Latin 1(Ansi) settings from. I am stuck on this setup. regards girish
-
I am trying to view a flash movie but am told Flash player is not installed.
I am running on Windows 8, using IE 10. I've tried running the latest IE update and the problem still exists. I tried turning IE off, restarted, then back on, but problem still exists. It works fine on Chrome. Any suggestions on how to fix this f
-
Customer Exit for Formula Variable
Hi all, and thanks in advance for your help on this one. I'm trying to run a function module to convert the value of a characteristic in my ODS to a formula variable. To do this, I've created a replacement path variable to hold the value of the chara