When exiting firefox the GUI shuts down but firefox.exe is sill running

Firefox starts and runs fine, but when time to exit, the GUI shuts down while firefox.exe is still running using 50% of possessor resources. I have to go into Windows Task Manager under processes and end program from there. Other wise firefox.exe will continue to run using more and more memory. If I try to start FireFox, then I get "Firefox already running".
Once I shut down firefox.exe with the Task Manger, Firefox will restart and run just fine.

Plug-in and tasks started by Firefox may continue after attempting to close Firefox. The "X" in the upper right-hand corner closes the Window (same as Ctrl+Shift+W) but even if it is the last Firefox window, it does not necessarily close Firefox .
The only proper way to exit Firefox is to use Exit through the File menu, not the "X" in the upper right corner of last Firefox window.
In 4.0 that would be Alt+F then X
"Restartless Restart" extension for Firefox 4.0 only (2 KB download )
https://addons.mozilla.org/firefox/addon/249342/
-- or --
"QuickRestart" extension (34 KB download)
https://addons.mozilla.org/firefox/addon/3559/
use to close and restart Firefox after enabling or disabling an extension, switching
to a new theme, or modifying configuration files, then you don't have to worry
about delay or have to look in the Task Manager to see if Firefox is closed yet.
Uses keyboard shortcut "Ctrl+Alt+R" or a file menu option.

Similar Messages

When I close Firefox, the windows closes normally, but firefox.exe still appears in Processes in Task Manager. I have to End Process to open Firefox again, and it goes to Restore Last Session page.

When I close Firefox, the windows closes normally, but firefox.exe still appears in Processes in Task Manager. I have to End Process to open Firefox again, and it goes to Restore Last Session page.
Quando eu fecho o Firefox, a janela fecha normalmente, mas o firefox.exe ainda aparece no Processos do Gerenciador de Tarefas. Eu tenho que Finalizar Tarefa pra abrir o Firefox de novo, e quando abre vai para a página de Restaurar Última Sessão.

I have the same problem - every time I close firefox (using either the red x or by selecting file ---> exit) the program appears to close normally, but the firefox.exe *32 process continues to run. If I try to re-open firefox normally I get a message that the program is still running and I need to go into task manager and manually kill the process.
I could also kill the process from the command prompt, but both of those methods are slow and annoying. This issue has only been occurring for the last 24 hours or so; to the best of my knowledge I haven't downloaded any new software or updated any plug-ins that would have caused a switch from firefox's normal awesomeness. Norton doesn't show any new viruses or other nastiness on my computer.
I'm running 64 bit Windows 7 Home Premium edition.

When I optimize, the organizer shuts down.

I am trying to optimize my thumbnail images in Elements organizer and whenever I hit optimize, a dialog box pops up saying the organizer has stopped working and windows is trying to find a solution to the problem, which it doesn't, so it shuts the organizer down. I have been having trouble viewing my thumbnail photos for a while and restarting doesn't seem to help..

The system info gives the path to the current catalog location.
You have to find that folder (it may be a hidden folder, so you may have to set your explorer preferences to show hidden files - I assume you are on Windows)
When you have found that folder, have a look inside it and lool for a 'thumbs.5.cache' file. That's the file you have to delete.

My Firefox 20 seems to not shut down but only restart. Also, rather than my home page, the last pages visited appear.

It's as if Firefox 20.0 never shuts down but only restarts.
Even when I close Firefox 20.0 by clicking the X button on the top right or use "exit," when I open Firefox, it acts the same as if I'd used "restart," namely the tabs don't load until I click on them. Furthermore, the 4 pages I use as my home pages aren't there but rather whatever pages I had up when I last closed my browser.
I have tried creating a new profile, which worked ONE TIME. Then, it went back to my problem.
I have used "restore" to go back to a time before the problem started but that hasn't worked.
I removed the addon I had downloaded in that time period but that didn't help, either.
Thank you for any help you can give. I know you're all volunteers and your time is important.

Does it seem like that Firefox is crashing? Try checking if there are any crash reports by going to about:crashes in your browser. Alternatively you can try safe mode as outlined below:
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I ope

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed?

My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work.

My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts to works. Anyone already have simmilar problem?

A windows error message appears saying iTunes has encountered a problem and needs to shut down.
let's get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

I tried downloading the iOS8 to my iPod 5th generation and when it finished downloading it shut down completely and it said there was an error and no the iPod is in recovery mode. What can I do to restore it and update it? Please, I need help.

Hello,
I recently tried downloading the IOS8 to my iPod 5th generation and when it was almost done the computer said there was an error. Right after that, the iPod shut down completely and now it's on recovery mode. I plugged it in and it said that I had to restore it and update it so I could use it again but it doesn't let me. What can I do? I even did a backup before the update.
I really need help.

What happens when you connect to computer and restore via iTunes?
Without knowing that:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs or so, then the machine shuts down and restarts.

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
Any help is appreciated.

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

I'm working on my iMac PowerMac8,2 PowerPC G5 (3.1) 2 GHz machine and have been having problems with the computer shutting down unpredictably. After the problem becoming impossible to work with, I shut the machine down. Now a little better, but reoccuring

I'm working with my iMac PPC G5, PowerMac8,2, 2 GHz machine running OS X 10.4.11, and was having a problem for a while with the machine shutting down unexpectedly. There was no clear pattern to when it was shutting down as far as I could tell. For a while, it would also not restart when buttoned on.
I set the machine aside for a while, probably a month or more, and then got it back out after its rustication. It started up and runs significantly better than it had been, but I have noticed it shutting down sometimes now again, though not as frequently as before. Sometimes it runs for a good long time between active work, sleep mode, and active work again. Once in a while it does shut down when no one is working on it (while asleep). But now it always restarts when buttoned on.
I've done the thorough vacuuming of any dust from the unit vents. I wonder if there's anything else I should try. In most other ways the machine works pretty well and has become the family desktop for basic uses, so I'd like to keep it running if I can. A little frustrating to not be able to upgrade all programs (iTunes) to useable versions, but that's another story....
I would appreciate any ideas about the shut down problem.
TCC

Option 1
Reset your PRAM. Press and hold down the Command Option P R keys while starting your computer. You will hear the startup chime. continue holding down those keys until you hear the startup chime a second time. Release the keys. If the computer restarts, you will need to reset your Date and Time. It might be time to replace your PRAM battery. The G5 iMacs require a 3 volt CR2032 lithium watch/camera battery like below:
http://eshop.macsales.com/item/NewerTech/CR2032/
You can find these batteries at Walmart, Kmart, Target, most local drugstore chains, for between $3-$5, or at Radio Shack for $12-$20.
If you have any G5 iMac model EXCEPT the iSight version, you can probably do the battery install yourself. Watch this video on upgrading your iMac's RAM to show you how to remove the back of your iMac, if you don't already know how:
http://eshop.macsales.com/installvideos/imac_g5_mem_m/
While you have the back off, use a can of compressed air to blow the dust out the vents at the bottom of the iMac, the fans, and anywhere else you can. Also inspect the 28-30 capacitors on the logic board. Look for dark spots, if they look puffy or swollen, or leaks.
Option 2
Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer. Let it sit for one minute. Press and hold the power on button on the back of the iMac while plugging in the power cord. Release the power on button. Count to five, the press the power on button again.
Option 3
Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer. (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.)
Continue holding the C key until you see the OS starting to load. DO NOT do an OS installation. At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility. On the left side of the window that opens,select your normal OS drive. Click First Aid at the top middle of the window if it isn't already selected. Click Repair Disk from the lower right area of the window. When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
When that is done, quit Disk Utility. From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk. Restart the computer. If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
Good luck.

While editing photos iPhoto shut down. The unexpected shut down message appeared and I pressed re-open. When it reopened I had lost my most recent import as well as imports from the past 2 weeks. When I try to re-import it says that they already exist

After an import of about 20 black & white photos to iPhoto I was editing one when iPhoto shut down. The "unexpected shut down" message was displayed. I clicked reopen, which it did. However, my last import was completely missing. Not only that, everything I had imported, adjusted and filed for the past 2 weeks was also missing. It has still saved all of the albums I created but all show "no photos".
When I try to re-import from my back-up, iPhoto says "can't import, photo is already in the library".
Can anyone help?

What version of iPhoto?
Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

My computer shuts down but the restart feature will not work. It just hangs.

Hello
I have a MS6547 version 1 (645 Ultra Motherboard)
The problem I am having is that my computer will not restart. If I press the power off button in windows it will shut down but the restart windows function will not work it just hangs at (Windows is shutting down)
I zero'd my hard drive and installed a fresh copy of windows but the restart feature still doesn't work. Even when I was in the middle of installing windows when the computer says it will reboot in 15 second that hangs on restarting computer as well/
Hope someone can help
My spec is
645 Ultra Motherboard
2.2gb Pentium CPU
256ddr2100 RAM
ATI Radion Graphics Card
60gb Hard Drive
LG CDRW
Please Help.

Hello and welcome!
It sounds like it has a hard ware reason. I suggest you take the motherboard out, to see that there are no stand-offs/spacers/distanser left unused creating a short.
Also, remember to have as little hardware as possible when you install Windows. No extra PCI-cards, USB-devices and such.
If the system has worked well earlier, above still rules, but here are some many other reasons for the described symtoms:
http://www.aumha.org/win5/a/shtdwnxp.php

I have a MacBookPro and just downloaded the new Firefox 4.0.1, whne I use the laptop wireless every the compute shuts down after a few minutes. What can I do?

I have a MacBookPro and just downloaded the new Firefox 4.0.1. When I use my laptop wireless the computer shuts down after a few minutes. What can I do?

Do you experience the same issue using other browsers, e.g. Safari?

When my battery is fully charged and i remove the power lead the computer shuts down

When my battery is fully charged and i remove the power lead the computer shuts down, evan when the power lights are fully green on the charger and the battery pack indercating lights.
Regards

I have exactly the same problem, which started again yesterday; coincidentally the day my warranty ran out!
The situation is complicated for me because I live in rural lincolnshire, but was in London all summer and had a new logic board replaced under warranty last month at the London- Stratford store.
It seems the £400 logic board replacement didn't fix it. When I try to get support, the website just laughs at me and holds out the cup for more money. I had a chat with somebody in the store this evening and I've got to take it into a store AGAIN!
Perusal of the 'Support' pages turns up literally thousands of people who have this or similar faults, all the way back to 2006, and I've not seen anything yet indicating that Apple have got a grip of it.
I've been using Apple kit for 16 years now and I've never had any trouble until now, but this bloody laptop, which is no better than my iMac now for portability has let me down badly several times in the last 6 weeks.
I'm really hacked off with this, get your **** together Apple!

How come when i sync my iphone5 to laptop window 7 it will shut down , but when m using ipad it will not shut down

how come when i sync my iphone5 to laptop window 7 it will shut down , but when m using ipad it will not shut down, so it means th problem is my iphone5

Hello vina8sy,
After reviewing your post, it sounds like the iPhone will turn off after a sync but the iPad will not. I would recommend that you read this article, it may be able to help the issue.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

Hi there. I have a problem with sound on my 4s. When you move the volume slider up, it sounds well. But when I move the volume slider down I will hear barely and unclear sound in my headphone.I tried different headphones but result is same as old one.Help

Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

When exiting firefox the GUI shuts down but firefox.exe is sill running

Similar Messages

Maybe you are looking for