When exporting 708 captions from Premiere Pro CC I only see the first 708 caption. Help?

Hi, our company just switched from Final Cut Pro 7 to Premiere Pro CC and we went from macs to PCs. I use the CaptionMaker program to create .mcc 608/708 caption files that I import into premiere, and I'm having a problem with the 708 captions. I embed the 708 captions in an mxf op1a file (I'm attaching a screen grab of my sequence and export settings) that I then copy to an XDCam disc, but when I play the disc back and check captions through our QC monitor I only see the first 708 caption and then the rest never appear. The 608 captions are there, but just the first 708 shows up. I've also had this problem when I print to video and when I create the captions in premiere instead of importing a caption file from CaptionMaker. And I was able to see 708 captions on a source that was captioned out of house so I know my QC monitor is working properly. Anyone have any ideas or suggestions for me to try? Thanks for your time.

I am not sure what product the dubbing house is using to master the tape.  I will try to find out.  As far as the file creation, I am using MacCaption to create the 608 & 708 .mcc file.  Bringing this in to Premiere and exporting out the MXF file.  I have contacted Telestream, the owner of MacCaption, there head of support says that other customers have had the same problem exporting out of Premiere.  They have tested caption files and the files are fine that this is a problem in Premiere.

Similar Messages

  • When I open a powerpoint presentation in Keynote I only see the first 8 slides

    When I open a powerpoint presentation in Keynote I only see the first 8 slides.  Any ideas?

    Curious.
    If I had this problem I would try the followinng:
    open the PPt file in PowerPoint (or Open Office for Mac, which is a free and  reliable option to MS Office) save it  as a PPt file and open in Keynote
    open in PPt or Open Office,  save all the slides as individual TIFF files and bring those into Keynote ( builds would not work on individual text or objects on a slide but at least you have the content)
    Open Office

  • Creating PDFs using Adobe Acrobat 9 Pro and can only see the first 10 pages in PDF even when the page numbers on bottom state 10 of 13 (or any number greater than 10).

    PDFs create great, unless they should be over 10 pages and then it appears the data was converted to PDF by viewing the page numbers at the bottom of the PDF but you can only view the first 10 pages in the pdf file.

    Hi stephaniec0103,
    Could you please let me know what exact dot version of Acrobat 9 and OS you are using.
    Have you tried repairing Acrobat from the Help menu?
    Acrobat 9 is an older version and incompatible with new OS versions, so I would suggest you to try using Acrobat XI (latest version) and check for the same.
    You may download a 30-day free trial version of Acrobat from the below mentioned link:
    Download Adobe Acrobat free trial | Acrobat XI Professional
    Let me know how it goes.
    Regards,
    Anubha

  • I'm having this message when I try to export my video from Premiere Pro:  "Error compiling movie. Unknown error"

    I'm having this message when i try to export my video from Premiere Pro:
    "Error compiling movie. Unknown error" Do anybody knows what to do?

    1st, I moved your message to the correct forum
    2nd, More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    3rd, Error Compiling Movie... some past discussions and ideas
    -http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
    -http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
    -and nested sequences http://forums.adobe.com/thread/955172
    -and WMV files frame rate http://forums.adobe.com/message/4629210

  • An image comes on my screen, but I can only see the first page.  When I try to print, I get a blue question mark and can't print.

    Recently when I pull up a multi-page document from an internet site, I can only see the first page.  I can't scroll through it.  When I try to print, I get a big blue questionmark.  What's the solution to this, please?

    Thank you so much!! So simple, yet so effective! Am happy!

  • HT203167 I have a few songs that I purchased from iTunes store that now only play the first 2 or 3 words of the song. How do I get the whole song back?

    I have a few songs that I purchased from iTunes store that now only play the first 2 or 3 words of the song. How do I get the whole song back?

    Hello hmcc44,
    You may need to delete the items from your iTunes Library, then redownload them.
    Deleting files from the iTunes library and your computer
    http://support.apple.com/kb/HT3842
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    If the issue persists beyond that point, I would recommend reporting an issue with the tracks to the iTunes Store.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933
    Cheers,
    Allen

  • Report from SQL Query -Excel format only show the first page

    Hi,
    I have some Reports from SQL Query. In the display options, I choose Excel as default format. The Excel documents only show the first page. If I choose HTML as default format, it shows every rows.
    Please advise on how to have a complete Excel document as HTML format does.
    Thanks a lot.
    Lina Han

    I beleive when you export Oracle reports to Excel it is the Data that is transferred along with Column Names.
    You cannot export the variables defined on the report.
    Hence you will not be able to export the Footer to excel. (Still looking into it will let you know if i find anything interesting)
    Regards,
    Bhushan Salgar

  • Can only see the first page of document and when I scroll the document is cut off.

    I was sent some notes from my professor but I am only able to see the first page and when I scroll, it shows the document cut off.

    Thank you so much!! So simple, yet so effective! Am happy!

  • No sound when I export to encore from Premiere Pro CS4

    I have created two separate video project in Premiere Pro CS4, when I export via dynamic link to Encore one exports with both video and audio, the second only exports video and no audion. However, when i look at the properties of the asset the Media Category indicates video & audio. Any suggestions?

    Lots more information needed for anyone to help... starting with your source video and going on to your project settings
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainspector.massanti.com/
    http://blogs.adobe.com/premiereprotraining/2011/02/red-yellow-and-green-render-bars.html
    If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    H.264 will NOT work inside an AVI wrapper http://forums.adobe.com/thread/854115
    More information needed for someone to help... click these links and provided the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679

  • Exporting to AVI from Premiere Pro CS5.0.2 from DVCPRO HD sequence giving only 1 frame?

    When trying to export from a P2 1080i 60hz DVCOPRO HD timeline to an AVI, whether going to queue or direct export using AME, it is going through its encoding steps but I am ending up with only one frame of let's say a 2 minute sequence. I've used Uncompressed AVI preset as well as Microsoft AVI preset - both going to 720 x 480.
    Happens with and without using Maximum Render Quality setting.  Happens whether I have MPE on or off.
    Couldn't find anything in the forum....have the Premiere Pro CS5.0.2 update.  Help.

    Unfortunately, the poster cannot award themselves "points." Otherwise, Harm and I would have over 50,000!
    Glad that you got the answer and the fix.
    Good luck,
    Hunt

  • Exporting a sequence from Premiere Pro CC is taking hours

    I am new again to Premiere after a 10 year hiatus. I have Premiere Pro CC and as exciting as it is to have the entire suite of products, I feel like resorting to iMovie after trying to export. I was initially getting acquainted with After Effects and solved my render times there after a little frustration, but this seems to be taking me down!
    I am creating a "movie" that will be projected on a 4:3 aspect, 20'x15' screen. I created a sequence that's 4 minutes long and it's got a .mov that I rendered from After Effects at the beginning,  then a bunch of still images that each last around 5 seconds with a cross dissolve in between each. In the middle there is another .mov from After Effects (bubble effects).
    I created the sequence with settings of: Editing Mode - QuickTime DV NTSC, 29.97 fps.
    When I try to export the sequence, I use QuickTime for the format; the preset is NTSC DV. This sets the video codec to DV25 NTSC. I've tried rendering with this codec and changing the codec to mpeg-4. I've also rendered with the quality set to as low as 65% with the mpeg-4 codec.
    Each time, the "Estimted Time Remaining" just climbs and climbs. I've managed to get to 13% encoded and the time remaining is around an hour, but keeps climbing with each percent rendered.
    I have a 27" iMac with 3.1 ghz Intel Core i5 processor, 4gb memory and running OS X 10.7.5
    If anyone can help me with export settings or a way to decrease the time, I'd very much appreciate it. I have searched for this topic and each solution I found involves exporting for the web.

    Use the MPEG2-DVD preset
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

  • I am trying to export a video from Premiere Pro.  I have both audio and video checked and the sequence is active but only the audio exports.  There is no video at all.  Can anyone tell me how to get the video to export.  It was working fine until today.

    Premiere Pro CC has been working fine until today.  I have completed my sequence and it is active.  I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate.  I am choosing entire sequence.  The audio exports but the video and title does not.  Can anyone tell me how to troubleshoot this so I can complete this project?  Please!

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • How to export EVS MXF from Premiere Pro 5.5

    I'm in the process of delivering a video to a production company that will be airing on CBS Sports in two days. They say they need it in EVS MXF and one of the production guys claims that the MXF formats in Encoder are not what they're looking for. He says the only product he knows of that can convert to the format is "FlipFactory" which is a paid program. I'm in the process of installing the trial version and it's giving me a hard time. I was wondering if anyone knew any workflows or solutions to export 1080p EVS MXF from Premiere. I'm running Windows Vista and the timeline is 29.97 1080p square h.264 mp4 files. Source footage was mostly shot on 5D DSLR and converted to mp4 for ease of editing. Thanks for any help you can give.
    Derek

    Thanks Joe and Jim. I thought it would be my path to success as well but I can't seem to get the trial version working. After installing all the side stuff, it places the shortcut to install the console on my desktop just as the instructions say. When I double-click on it though, IE will not connect to http://localhost:9000. I assume for some reason it's not connecting to the SQL server that it installed but I'm not sure how to force it. Do you have any tips or pointers on getting this part of the installation process to work? I'd contact support but they're gone until Tuesday morning. Thanks again for your help.

  • Exporting DPX Sequence from Premiere Pro CS6

    I edited a .mov premiere sequence from my 7D and 5D MK II in SpeedGrade by using the "send to adobe speedgrade" option. I exported the grade as a .dpx sequence and brought it back into premiere. Now when I try to export it in h.264 "for youtube hd 1920x1080 23.976", I get a huge loss in color range and blacks become so pixelated and I even lose a lot of darkness in the blacks. The grade no longer looks good. The preview monitor looks great in premiere but it does not match the final export. I need help with this one!
    Software: Production Premium CS6
    Footage: 1920x1080 / 23.976fps
    Camera: Canon 7D + 5D MKII
    System Specs:
    W7 Professional 64-bit
    i7 930 (stock)
    Gigabyte X58A-UD3R
    12gb G.skill Pi Series 1333mhz
    EVGA GTX 470 SC
    180gb Corsair Force GT SSD (boot)
    1TB WD Caviar Black (production premium program files)
    2TB Seagate Barracuda (speedgrade .dpx files)
    750gb Seagate Barracuda (source footage/scratch disks + cache)

    Use the MPEG2-DVD preset
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

  • Can you export created videos from Premiere Pro Trial to youtube?

    Is it posible to export a created video from a trial of Premiere Pro to social media networks such as youtube or vimeo?

    Yes.
    Mylenium

Maybe you are looking for

  • Moving Scriptlet Code to backing bean when converting from JSP - Facelets

    Hello! We are converting our application from jsf1.2 to 2.0 and all jsps are being converted to XHTML. Some are trivial while others had very complex scriptlets. I would like to know what are some of the recommended ways of moving Scriptlet Code to b

  • PS CS6 Download instructions do not contain English

    Download_and_Install_Instruction_all.pdf -- downloaded from Adobe when I bought PS CS6.  It opens i Preview on my Mac (10.7.3) and begins in Arabic then many other languages.  Also, when trying to search this doc for an English word, Preview crashes.

  • Force jar to run through java.exe not javaw.exe

    Hi,I am programming using eclipse 3.5.1 when i try to export my project as a single jar file it always runs through javaw.exe even if its a console app the problem is that sometimes i want it to run through java.exe without having to write the annoyi

  • Please correct this

    select a. b_name, b.VESSEL ,b.vessel_date, sum(nvl(b.qty,0)) Econt_QTY,      x.b_name,y.vessel,y.vessel_date, sum(nvl(y.iqty,0)) Issue_qty                          from mol_exp a, sub_mol_exp b,                          mol_issue x , sub_mol_issue y

  • IMovie not finding my movies in iPhoto

    Is there a reason why iMovie is not automatically finding the movies I have saved in iPhoto? I have many movie clips from my camera that I imported into iPhoto and would like to move them over to iMovie. Or do I have to import these clips separately