When exporting a FR report to excel in Query Ready Mode, the report breaks over several sheets in Excel. We use SmartView and FR-Studio version 11.1.2.924 Reportserver 11.1.2.3.505.0924

This happens after we upgraded from 11.1.1.2.
The reports have not been changed after the upgrade.

Had the exact v11113 issue with 2003, so it forced people to move to ver2007 xls.
Attempted to change settings in IE, but did not get far, users got FR further in 2007.
Bug was noted in previous forum.

Similar Messages

Cannot export Financial Report from HTML view to Query Ready Mode

Hi,
I am opening Hyperion Financial Reports in Workspace in HTML mode. On the bottom right of the report, when I click on "Export in Query Ready Mode", the report does not get transported to excel. Rather, a message flashes for a split-second and disappears. The message is "The address is not valid". Can anyone please advise as to what should I do to get the report in excel? I did notice that there is also File->Export->Excel->Fully Formatted Grids & Texts, but we want to get it in Query Ready Mode.
Version is 11.1.1.3. Thanks for any suggestions.
ABG

We have resolved this issue. The problem was that Smart View installation/configuration was not complete on the machine which I used to launch report into Query Ready Mode. Once Smart View was fixed, we were able to convert report from HTML view to Query Ready Mode.
ABG

Export in Query Ready mode not Working.for FR reports in HTML view

Hi,
When we run the FR reports in HTML view in Workspace,there is an option at the bottom to "Export in Query Ready mode",it's not exporting the report in Smart view excel .
But some of our users are able to export the report in SV.We are using EPM 11.1.1.3. I have checked the IE 7 settings with other users and it's same.
Does anybody has any idea what could be the cause?
Thanks in advance.
BC

It is the behavior, Query ready mode will only pulls the members which are in Essbase (no FR calculated fields)
Regards
Celvin
http://www.orahyplabs.com

How to hide/disable option "Export In Query Ready Mode" in HTML FR reports

Hi all,
is there a way to hide or disable the option "Export In Query Ready Mode" for HTML FR reports?
Thanks in advance!
Regards
André

Yes, it is a cool feature but I didnt ask for it :-) Besides it doesnt work completely without errors/warnings:
If i click on the link and then on open (save xls works fine) an error message occurs: "Could not open 'http://<servername>/hr/hrget/modules/com/hyperion/reporting/web/office/HROfficeReport.jsp/test.xls?gridname=grid1&iInstanceId=18885&format=excel.2002&viewAs=query&previewDone=true&promptDone=true'"
After click on OK another error message occurs:
"Microsoft Excel cannot access the file 'http://<servername>/hr/hrget/modules/com/hyperion/reporting/web/office/HROfficeReport.jsp/test.xls?gridname=grid1&iInstanceId=18885&format=excel.2002&viewAs=query&previewDone=true&promptDone=true'. There are several possible reasons:
The file name or path does not exist.
The file is being used by another program.
The workbook you are trying to save has the same name as a currently open workbook.
After click on OK the XLS export opens correctly but the messages are annoying. Perhaps anybody can help me ;-)
Thanks and kind regards
Andre

How to hide/disable option "Export In Query Ready Mode" in HTML FR reports (workspace)version 11.1.1.3

Hi all,
is there a way to hide or disable the option "Export In Query Ready Mode" for HTML FR reports (workspace) version 11.1.1.3.
Thanks in advance!
Regards
Tej.

Hi Tej,
The feature, "to hide or disable the option "Export In Query Ready Mode" has been introduced in Financial Reporting 11.1.2.3.
    Logon to EPM Workspace.
    Open menu File > Preferences > Financial Reporting.
    The new option, called "Disabled" is available for Query Ready Mode. If selected will disable Query Ready mode completely.
Thanks,
Krish

FR error exporting to excel Query ready mode

We are getting an error while exporting to Query ready mode. Error says report is not a valid single file web page.
but its working for other user.
any clue.

check this might help :
Re: "not a valid single file Web Page"

Export in Query Ready mode not working in 11.1.2.1

Hi,
I have created a report with 3 grids;
Grid 1 - populates employee information,
Grid 2 - populates employee salary
Grid 3 - calculation of Grid 1 and Grid 2.
In Report I am able to see the data, but when I am using the "Export in Query Mode" option the report is exporting into Excel where as Grid 3 has NO more formulas.
Please suggest by modifying the settings/options in Excel will resolve the issue or is it a bug?
Thanks in advance!
Regards,
VA

It is the behavior, Query ready mode will only pulls the members which are in Essbase (no FR calculated fields)
Regards
Celvin
http://www.orahyplabs.com

Export in Query ready mode - Office 2010 not working

Hello everyone,
I am facing the following problem with Hyperion Financial Reporting:
When I display a Financial Reporting report in Workspace and click on "Export in query ready mode", a new Excel session is launched with an empty sheet and nothing else happens. Eventually Internet explorer displays a message "The application hasn't started yet. Do you want to wait?" This cycle repeats forever unless I close the small IE window that popped up.
We are using Windows 7 and Office 2010. The Smart View version is 11.1.1.3.500 (Build 008) and Workspace is version 11.1.1.3.0.956.
Would be very grateful if anyone can help me solve this issue as this function is very useful.
Thanks,
Martin

Alright,
There is some development with this problem, but unfortunately another one arose.
To solve the issue I had to disable the option "Protected mode" for the Internet Zone of Internet Explorer. Although the App server is on the local intranet, to launch Excel the web page uses the protocol oraclesv:// which appears to IE as "Internet" address.
When I disabled protected mode, some of the reports started to open normally in query ready mode. Unfortunately for some other reports Excel crashes. I.e. I open the report in workspace and click "Export in Query ready mode". I see Excel open up and the cells are filled in with members, etc. but at some point Excel just crashes and restarts. This can be destructive if I am currently working in some file.
And now the interesting part: I tried to find the reason why some of the reports are ok and some crash excel. It turned out that this depends on the amount of data in the report. For smaller reports (i.e. less than 50 rows) there is no problem, but for larger reports -> excel crashes.
I hope this explanation is helpful for someone else, as it took me quite a while to find the problem.
Martin

Export in Query Ready Mode get Essbase Error 1020047

Through Workspace when in a Financial Reporting Report, when we click on Export in Query Ready Mode, we get the following error in Excel and then Excel closes. 'Essbase Error (1020047): A column item [%] conflicts with a row item[%].'
Any ideas?
We are using 11.1.2
Thanks.

This is bug and fixed in 11.1.2.1.102 Smart View

FR (11.1.2.1) export in query ready mode with default ALIAS

I am not seeing default ALIAS when exporting my FR from workspace to excel using Query Ready Mode.
Any help is appreciated.
Thanks

Did you try changing the alias once the report is exported?
Regards
Celvin
http://www.orahyplabs.com

FR 11.1.1.3 "export to query ready mode" option not working

Hi All,
We have a scenario where few users are not able to use the "export to query ready mode" option after running an FR report.
For some reason the save dialog box doesnt open or doesnt pop up when this option is ticked.
Note that this issue comes only on running FR Essbase reports. (for FR HFM reports it works fine)
Does any body have any resolution to this.
Kindly advise.

Hi,
Can anybody explain me the option of this *"Export in Query ready mode"*???
Is there any document through which I can understand???
Thanks
Sourabh
Edited by: CM on May 11, 2011 6:32 AM

Export to query ready mode

In version 11.1.2 when exporting a report to query ready mode from workspace we are getting an HRdialogue error message. However when I turn off the POV preview in user preferences it works. Anyone else experiencing this?
Thanks,
Jeff

Hi,
Can anybody explain me the option of this *"Export in Query ready mode"*???
Is there any document through which I can understand???
Thanks
Sourabh
Edited by: CM on May 11, 2011 6:32 AM

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

http://borgdatanode42.selfhost.me/blog/index.php?#param=id_48
try to using iTunes via remotedesktop? try without.

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André

When exporting a FR report to excel in Query Ready Mode, the report breaks over several sheets in Excel. We use SmartView and FR-Studio version 11.1.2.924 Reportserver 11.1.2.3.505.0924

Similar Messages

Maybe you are looking for