When exporting, PP renders audio that wont be in the export.

Hello folks.
For my project I basically have a giant, like 10h long timeline filled with audio, that as time goes by becomes shorter and shorter.
With that (and some video footage I add to it) I have export-videos of several minutes of length.
The thing that disturbs me is that when I start exporting, PP renders all of the audio from the timeline, even if its not going to be in the export.
More visually:
Say I load 5min of music and 5min of video into PP and then I export it, it needs e.g. 5min
Say I then load 10h of music and 10h of video into PP and just select the first 5minutes of that huge thing to export, it needs 10h instead of 5min.
How to deactivate that? I know its useful to pre-render the audio like that if I was to work with all of the music during one PP session.
Bbut in my case just little amounts of video footage goes into PP per day, so it is just disturbing to render all that audio again and again...

Hi Tavados,
tavados wrote:
How to deactivate that? I know its useful to pre-render the audio like that if I was to work with all of the music during one PP session.
Bbut in my case just little amounts of video footage goes into PP per day, so it is just disturbing to render all that audio again and again...
That's a little strange. What you might try is to make sure that the sample rate of your clips match the sample rate of your sequence settings. I hope that helps you.
Thanks,
Kevin

Similar Messages

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

How do I create a new apple store account when my phone tells me that I have exceeded the maximum limit on this phone

http://support.apple.com/kb/HT4627

Exchange Personal Archive - When Replying To A Message That Is Not In the Inbox, Save The Reply In The Same Folder

-Settings
Exchange 2010 enterprise on-premise
Outlook 2013 std
Exchange Personal Archive
Feature : Option/Email/When Replying To A Message That Is Not In the Inbox, Save The Reply In The Same Folder
Hi,
the feature works fine in the mailbox of the user but not from within the exchange personal archive.
Instead the reply is saved in the send items folder of the mailbox.
Any suggestions how to make this work?
Best Regards,
zrvb

AFAIK, that is how it is intended to work. The archive is considered as "old-emails" so the newly created reply doesn't fall within that category.
Contact Microsoft Support by phone to submit it as a bug when it is "unexpected behavior" from your point of view or otherwise as a feature request/design change.
Robert Sparnaaij
[MVP-Outlook]
Outlook guides and more: HowTo-Outlook.com
Outlook Quick Tips: MSOutlook.info

I use the apple email in my mac air. When I foward messages, people that use Outlook receive the text in form of attachment instead of the message opened in the body of the email. How can I solve this?

I use the apple email in my mac air. When I foward messages, people that use Outlook receive the text fowarded in form of attachment instead of the message opened in the body of the email. How can I solve this? Thanks. Best regards.

this:
Did not exist at the point of delivery to the consumer.
Nor did the white corrosive agent present exist at the point of sale.
" exposure of copper alloys to moisture or salt spray will cause the formation of blue or green salts called verdigris. The presence of verdigris indicates active corrosion."
I see also 2 contact points with DEEP corrosion pitting not indicative of any defect from the factory.

Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

Running CS6 on a Macbook. Can anyone help me figure out how to record audio that is streaming on the Macbook? Under "Audio Hardware," my input choices are "Built in Mic" and "Built in Input." Neither does this.

Please repost on the CS6 part of the Audition Forums.

When saving image i want that firefox auto change the file name if same name exists like google chrome etc. if there is any option pl let me know.

when saving image i want that firefox auto change the file name if same name exists, like google chrome does this. if there is any option pl let me know.

this saves images, i just want to save single image, and wants while saving image, it auto changes the name if find similar name of file in the folder. chromium and maxthod does this

I got pops and clicks all over my audio that weren't on the original video.

Is there a simple way to get rid of these pops. I've already extracted audio to Audacity and tried their click removal filter but their still there and the track sounds worse so of course I undid that. Any other suggestions besides going and finding each and every pop and deleting it. This is a 1hr 20min vid.
Help please.
Revealski

Hi R
My guess is that You've used the LP-setting (90 min to a 60 min tape) on Your Camera.
This gives these problems:
• Drop-outs
• Audio stutterings
• Audio eventually goes out of sync.
To prevent this in futhure
• USE ONLY SP-mode (60 min to a 60 min tape)
• If You need more. Use a 90 min tape.
To the running project:
• You'll have to re-import all material - but - now set in iMovie pref
"Import as individual Clips" to OFF. Yes You'll get a lot of work to cut it up
but this or Copying the material to another Camera/tape station set to SP-mode.
(If the latter works - I don't know - may be not)
• Now in iMovie immediately:
move all clips down in TimeLine
select all clips
GOTO Advance menu and down to Extract Audio.
Now play and it could work. Tested once and I got an usable material.
BTW: When adjusting the Camera. Set Audio to 16-bit (12-bit also gives sync. probl.)
Yours Bengt W

Need to fix bad audio that came attached to the video, any tips?

I have the video and the audio that comes attached to it is not good.Their voices are very low. When I try to make it louder there is this humming noise. When I try to reduce the background noise (it's like a hissing sound) then it sounds like she is in a fishbowl. It says the humming removal is "on"
Any ideas?
Thanks in advance.

Unfortunately, garbage in - garbage out.

Music Videos that wont play on the Pre

I am getting error messages from videos that wont play.. Has anyone ever had the error message that says you need Fairplay?
Post relates to: Pre p100eww (Sprint)
Message Edited by vballdonny on 07-27-2009 03:55 PM

probably the video that you are trying to play is not supported?
MPEG4, H.263, H.264, MP4, M4V, 3GP, 3GPP, 3G2, and 3GP2 formats are only supported

I have a few movies in my itunes that wont save to the cloud how do I fix that

I have a few digital copy movies that I have downloaded from iTunes and they are not showing up in my history list and I cannot download them to my other devices. They do not have the clould icon next to them. How do I make sure that they are saved to the cloud?

Are these movies that were purchased thru iTunes? If not that is why. The following is from this Apple document: iCloud: Backup and restore overview.
iCloud automatically backs up the most important data on your device using iOS 5 or later. Once you have enabled Backup on your iPhone, iPad, or iPod touch .....
What is backed up
You get unlimited free storage for:
Purchased music, movies, TV shows, apps, and books
Notes: Backup of purchased music is not available in all countries. Backups of purchased movies and TV shows are U.S. only. Previous purchases may not be restored if they are no longer in the iTunes Store, App Store, or iBookstore.
Some previously purchased movies may not be available in iTunes in the Cloud. These movies will indicate that they are not available in iTunes in the Cloud on their product details page in the iTunes Store. Previous purchases may be unavailable if they have been refunded or are no longer available in the iTunes Store, App Store, or iBookstore.
You get 5 GB of free iCloud storage for:
Photos and videos in the Camera Roll
Device settings (for example: Phone Favorites, Wallpaper, and Mail, Contacts, Calendar accounts)
App data
Home screen and app organization
Messages (iMessage, SMS, and MMS)
Ringtones
Visual Voicemails
OT

I use Safari with Comcast email, when I forward an email that has pictures in the email it omits them

I use Safari with Comcast mail, whem I forward an email that has pictures in the email it omits them.

Make sure the photos are jpg format.

I have a chase debit card and I tried to buy an app and I haven't ever registered my debit card on the iTunes Store yet but when I tried to so that I could buy the app I entered my info and it declined my card and I'm just confused on what to do

If you guys can help out I'd appreciate it

You won't be able to change your rescue email address until you can answer 2 of your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

My macbook pro will not bootcamp to windows xp when i try it says that it cannot read the disk or it is invalid can someone help?

Can someone tell me why my macbook pro wont bootcamp to windows xp and it says that the disk is invalid or unreadable?

Vista isn't supported either but my MacBookPro 4,1 with Lion does boot off the Vista DVD. I'd wonder if this Windows XP disk actually is invalid or unreadable. Can it be mounted when you're running Lion?

Kerberos error when using a DNS name that doesn't match the Active Directory domain name

I am running into a weird issue with a new SQL Reporting Services server I built. I installed SQL Reporting 2014 on Windows Server 2012 R2 and configured Kerberos, but the site is extremely slow. After some reconfiguration and log captures I have determined
the issue has to do with the Kerberos setup but it is an exact replica of a Windows Server 2008 R2 server we currently have and it does not have these issues.
The error I see while using Wireshark is KRB Error: KRB5KDC_ERR_BADOPTION NT Status: STATUS_NO_MATCH.
When I drill down the into the error I can see the kerberos string is testprjmnmtreports14.company.com, which is the URL we are using to access the site. I made sure to add that name as an SPN for the service account that is running SQL Reporting Services,
however I still receive the error.
Then I tried configuring the site to run without a hostheader, so I accessed the site with the server name ECTSTSQLRS5 and the site works perfectly fine, no errors are reported either. So it seems I have isolated the issue down to Kerberos but I am not sure
how to resolve it. Here is some more information about my environment:
DNS/URL used: testprjmnmtreports14.company.com
Server Name (FQDN): ECTSTSQLRS5.company.int
AD Domain Name: company.int
Server Version: Windows Server 2012 R2
AD Functional Level: 2008 R2
I also have the following SPNs set for my SQL service account:
http/testprjmngmtreports14.company.com
http/testprjmngmtreports14
http/ECTSTSQLRS5.COMPANY.INT
http/ECTSTSQLRS5
As you can see I am trying to use a .com address but my AD domain is .int which I think is the issue, but I do not have the same problem on my other server that is running Windows Server 2008 R2.
Has anyone see this issue before? What do I need to do to allow my new site on 2012 R2 to work with this DNS Alias?
Thanks,
Brandon

Hi
Quote from there; Kerberos errors in network captures
The most common scenario is a request for a delegated ticket (unconstrained or constrained delegation). You will typically see this on the middle-tier server trying to access a back-end server. There are several reasons for rejection:
1. The service account is not trusted for delegation
2. The service account is not trusted for delegation to the SPN requested
3. The user’s account is marked as sensitive
4. The request was for a constrained delegation ticket to itself (constrained delegation is designed to allow a middle tier service to request a ticket to a back end service on behalf on another user,
not on behalf of itself).
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

I am trying to change the font on my emails and I keep following the instructions exactly by going into preferences, fonts and colours and then choosing - then when I go out of that and back to the message it reverts to Helvetica - what step am I missing?

I am trying to change the font on my emails; I follow the instructions exactly going to Preferences, Fonts & Colours, then I set the preference - I then go back to my message and it reverts to Helvetica. What step am I missing?

There is a display bug, but it still works okay -
I prefer Arial to the default Helvetica, so that's what I set -
When I first open a new message window, it displays Helvetica as the font -
However, as soon as I type the first character, it switches to showing Arial as the font -
...and actually enters in Arial.

When exporting, PP renders audio that wont be in the export.

Similar Messages

Maybe you are looking for