When exporting project, result file does not work 100%

My version: CS4 Premiere Pro
My set up: Vista Ultimate 32bit, 8GBRAM, NVidia Quadro FX 5600 Driver v: 191.78
My issue:
I have a footage of about 2.5 hours. It is a seminar I recorded. It was recorded on a Sony Handycam CX-100 HD camera. I want to export my project to H.264 format so the client can take a look at the footage and provide cue points for editing.
The only thing I added to the video was timecode for the client set cue points. When I export project I select H.264 and save it as Hight DV quality 720x480.
My problem is that when Encore finish processign the video, I open it to check if it is working and I find that after minute 40 the video frezees and I can only hear audio.
What is wrong? Am I forgetting a setting before saving the video? If I save the video on a Windows format, it plays ok.
Can anyone provide help.
Much appreciated. Thx

Is there anyone who may be able to help me?
Please. Thx.

Similar Messages

When exporting as aic cropping does not transfer the clips appear in the original size...

When exporting as aic cropping does not transfer the clips appear in the original size...how can I fix this?? Aic seems to be the best quality - least compressed - so I would prefer to use it rather than the other options.

ssprengel wrote:
And if you go to Develop, and make your filmstrip thumbnails a little taller to make sure all the badges are shown, does a missing indicator show up, there? Can you Export from Develop?
If you click on the Photos that Failed to Export collection at the top right does the photo it highlight have a missing indicator?
If you do a test export with just one photo, to your internal drive, does it work?
I adjusted the height of the thumbnails. Still no exclamation points or question marks as noted here.
Also, as to your second question, unfortunately no as noted here.
And as to your last question, I have tried several times to export them to my desktop (which would be on my internal drive, not external). I've even gone so far as to put a copy folder of my original NEF files onto my desktop (7 gb worth) to see if that would help me export...it didn't.

Swf file does not work from InDesign

I am not sure if this is a Flash or InDesign question, so i will post on both..
I am trying to embed an “animated” swf file (that was created in flash) into an InDesign layout and then export the InDesign layout to swf. in the resulting html file my navigation works ok but the swf file does not play “animate” when viewed in html or flash. It only shows up as a graphic.
I have tried exporting the ID file to xfl and bringing it into flash but then none of my animation works. What am I doing wrong?
any help would be appreciated.
thanks
mattG

You´re doing nothing wrong. SWF export of InDesign CS4 doesn´t support any media files. You can place videos, sounds and animations into indesign layout, but if you export to SWF, they won´t work in resulting SWF. They work in interactive PDF.
And you can export your basic layout to Flash CS4 by using XFL export and import those media elements in Flash, but that may be quite a job. I have been strugled a lot with that method. My files used to go really messy when I open them in Flash.

"Always ask me where to save files" does not work.

Summary: The "Always ask me where to save files" feature does not work. No dialog box comes up, apparently because the browser is stuck on a bad old read-only lastDir location, in a prefs.js file that I can't edit.
Details:
I am using Firefox 30.0 on Mac OS 10.6.8. My Mac has a both a read/write Mac partition that I use most of the time, and a bootcamp Windows partition drive ("C"), which I can read but not write to.
At some point I accidentally tried to download a file from a site, using Firefox, to the read-only Windows C drive. Ever since that time, I have not been able to download any files from Firefox, except to the firefox/downloads folder. This is inconvenient. If, in preferences, I try to set downloads to ""Always ask me where to save files", the dialog box does not come up when I actually try to save files. This problem does not apply to saving photos by right-clicking them.
If I open, in text-edit, mozilla/firefox/profiles/t4vockvue.default/prefs.js, which was saved yesterday, I can see a problematic line. It reads:
user_pref("browser.download.lastDir", "C:\\Documents and Settings\\[etcetc]");
C:\\Documents and Settings\\[etcetc] being the read-only windows directory.
This prefs.js is apparently not an editable file.
I tried to fix this by opening a browser tab in Firefox and opening about:config. The editable browser.download.lastDir does NOT show the same "lastDir"....it shows some directory that I successfully downloaded photos to, by right-clicking on a photo.
How can I fix this problem?
Thanks.

To confirm which profile folder is active when you are running Firefox, it is easiest to open it from inside Firefox as follows:
Sometimes the file that stores the customizations becomes corrupted and fails to update properly at the end of your session. You can rename the file and customize from scratch.
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
In the first table on the page, click the "Show in Finder" button (Windows: "Show Folder" button).
Hopefully you are using a separate profile folder on each OS.

Link in pdf-file does not work on Ipad

With my site www.bartkuijer.nl I offer visitors the free possibility to see (and download) sheetmusic, from music written by me. These are pdf-files. But they can not only SEE the sheetmusic; the music on that pdf-files can also be PLAYED. That's done bij clicking on a link in that pdf-file to a mp3-file of the music on my site.
This works fine on a pc. When I try this on the Ipad of my wife it DOES NOT WORK!
So my question is: how come? And what to do to make this work also fine on an Ipad.
This is important for me, because I want this sheetmusic to place as Ipad-apps for free.

It works!
But not with a pdf-file. The Ipad does not recognize links in a pdf-file.
Te solution is found by making a htm-file with emdedding a quicktime-player and images of the music. This is my first Ipad product. On a pc the player starts immediately; on the Ipad it has to be started.
Now I have to work on a solution to change this to an app

Hyperlink to a music file does not work, Am I doing it incorrectly?

Hello there. I am a composer, trying to add all my music samples to the website. I created a title of one of the music samples, then hyperlinked it to that corresponding music file (mp3), so, when you click on that title, it links it to THAT music file. But, it does not work when I click on the link. If I assign the link to another page for example, the link works. What am I doing wrong here. Or is this not possible? I would hate to have a whole list of music files on one page, especially with that "add image here" box on every one of them.
Any help would be greatly appreciated. Thanks

The file has to be uploaded to your server and then linked to as an external page using the Inspector/Link/Hyperlink pane with the option to open in a new window.
You'll get the same effect as with the music example in this demo page but with a full sized window instead of a smaller one: Opening Item in a New, Precisely Sized Window.
This method would let you add the links to all of your songs to one page. Or you could use a music jutebox for those songs like Roddy has on his iWeb for Musicians site:
Jukebox Alive
Juke It Jukebox
This would reduce your site size considerably. But all these methods require you to upload the audio files to the server and link to them there.

Some Flash files does not work in the Portal

Hi,
Anybody know why I have problems viewing some flash files in Content Management in the portal?
The file extention is .swf
I have a number of files. All of them works locally. When uploading them, there are a few of them that does not work.
They can simply not be showed. Not in JSP and not by clicking on them. Very strange.

Hi Flemming,
this could be a compression problem. Try to disable output compresssion for .swf files and the corresponding mime type 'application/x-shockwave-flash'. Click <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/ad/08d52d6d95864492a6a5931bb62716/frameset.htm">here</a> for more information how to disable compression.
Regards, Roland
PS: disabling compression for .swf is no performance problem, because they are already compressed.

Call-Off and Forecast Excel-File does not work anymore?

The Excel-file e-mail sent does not work any more (Excel says: "The following system error occured: .") when opened with Microsoft Office 2010, which I have on my new
computer with Windows 7 Professional x64.
The file is quite important for checking order and forecast quantities retrieved via OLAP-task from 101AS.
Many thanks in advance for your help.
ICT ASKNW
PS: When i use Excel 2007 all work fine. But when i clean Install Excel 2010 it wont work anymore. So but when i upgrade 2007 to 2010 it still working? Can it be true that a
file of the 2007 Edition is missing on 2010? Thanks for your help!

Hi Sir,
Would you like to share us the whole error message？ The following system error occured:... We need it to check the issue.
If you have any update, please feel free let us know.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Hp 6700 option to scan to single file or multiple files does not work-scans to single files only

Cannot find a way to scan multiple documents to a single file. The option on the Scan function does not work!

Hi @apdamw
Have you tried saving the scanned pages as a PDF? When you choose PDF in the format option, you will see the option to choose save all pages to a single file, or create a seperate file for each scanned page. Depending on what option you see, you will need to tick or untick the option.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

'GetInfo' file does not work!

Hey Folks,
I have a strange problem...
I have just migrated on a PPC-G5 from an Intel processor Mac (I have used the migration assistant utility) and the 'GetInfo' file doesn't work. I cannot have access to any file informations.
The most surprising thing is this problem happens under my account only. There is 2 account on the computer and the 'GetInfo' works fine when I am logged-in under the second account.
Do some one have an idea?
Thanks for your help,
Arnaud

The thing is I have migrated from a (slow) MacIntel to a (fast) PPC-G5, and not the opposite. The 'Get Info' file function does not work...
The same rules apply. Migration Assistant migrates wholesale lots of elements of the operating system. You'll be finding a needle in a haystack trying to find the right thing that doesn't belong.
Your best bet is to erase and install the operating system that came with the G5, and restore piecemeal the documents and applications which will run on a G5.
A MacIntel should not be slow, unless you depend a lot on old PowerPC applications that require G5 or G4 power. MacIntels may require more RAM as well.
Unfortunately the differences between CPUs are great enough that plugins and drivers simply don't transfer over well when done by the Migration Assistant.

Win8.1 - Error when using traceview "PDB file does not contain provider information"

We have been attempting to manage a Windows 8.1 machine by using the Enterprise Device Management Protocol.
We are encountering a failure during the process and would like to inspect what is going wrong on the Client Side. Used the “Windows 8.1 Enterprise device Management Protocol” guide that was published by Microsoft.
The guide suggests that for capturing and viewing logs generated by the built-in management agent and its components you will need access to the traceview.exe utility and the debug symbol files (.pdb) for the Windows build running on the device.It says that
we can enable advanced logging by adding the following keyvalue to the registry.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\MDM\Debug Settings]
"EnableSyncmlLogging"=dword:00000001
Start the traceview.exe utility from an elevated command prompt and add the following providers:
mdmagent.pdb
mdmappprov.pdb
mdmsettingsprov.pdb
Start the log capture and execute the scenario.
We have been having problems with adding the providers. We tried both downloading the symbol files from
http://msdn.microsoft.com/en-in/windows/hardware/gg463028.aspx#Download_windows as well as pointing traceview to the Microsoft symbol server. All our attempts to add providers result in “PDB file does not contain provider information”
Machine specs: Windows 8.1 Pro – 64 bit operating System
We would be grateful if someone could help us set up logging for this scenario using traceview or any other tool/mechanism.

Hi,
About traceview issue, better to post your question to the forum for Windows WDK forum:
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=wdk
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn
from your interaction with us. Thank you for your understandin
Karen Hu
TechNet Community Support

Documents to go app is not working.in the screen when I opened it it does not work

In my I pad I installed documents to go apps.now when I touched the icon it does not work.

Hi abeysingha,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
I hope this information helps ....
Have a great day!
- Judy

Purchased file does not work!

I have just recently purchased The Ricky Gervais Show Season 1 and it came in 3 parts and part 1 does not work, the other 2 work fine.
I have tried authorizing the computer again but still only part 2 and 3 play on iTunes/iPod.
If I could get some help on this matter I would be very thankful
Thanks
Chris Wilson
P.S. I used a gift card to purchase this item

What exactly do they do? Just not play? Give an error message? Skip? Ask you to authorize the files? Give as detailed of an explanation of the issue as possible so we can know where to start.
This may help:
Troubleshooting iTunes for Windows video playback performance issues
http://www.info.apple.com/kbnum/n303706

File Export menu in CS6 does not work properly?

Two main issues:
1. If I downsample a 96kHz audio file to 44k1 for example I have the option to impose an anti-alias low-pass brickwall filter in the export path or not. This is a good idea. However as implemented in the Audition CS6 system we have, Adobe has the tick-box configured incorrectly. With the box ticked the filter is switched out, and with the box unticked the filter is switched in. This should be debugged and fixed. It makes me worry that other configurations might be wrong.
2. The defaults for the implementation of dither in the export of a file are inconsistent. The default should be that whenever audio data are changed by any processing, dither is applied in the exported file. This is inconsistent in Audition CS6 on our system and we have to go through all the setup for each export.

Thanks Steve.
I agree about the quality of Audition's sample-rate conversion. It is very good indeed and one reason we bought Audition. I also agree about the perverse logic of Audition having a tick in the box to turn the low-pass filter off, rather than on. This is is counter-intuitive, even if the excuse is that it is how it has always been historically in Audition or maybe even CoolEdit (which I have never used). Maybe Adobe could consider retitling this function so the logic is more obvious to newcomers. The riddle of how to combine requirements for 96k/24 high-res masters for one market with the needs for 44k1/16 delivery for CD, downloads and streamers remains a riddle if we are not to make our 44k1/16 masters (the main market) sound inferior to having made them 88k2 or 44k1 originally.
As for dither. My experience has been that one stage of unintended truncation does typically approximately five to ten times as much damage (irreparably) to a clean recording as does one stage of unintended dithering. I am only talking about default settings which can or should be easily overridden either in 'settings' or 'preferences' somewhere within Audition, or overridden on any single or multiple instance of exporting. The mathematics are against you on this one. If you have a 96k/24 original file and want to export a straight 96k16 file or 44k1/24 or 44k1/16 version, for me dither is obligatory. The same if you are exporting a 96k/24 file after processing. Whatever happens next. If you are exporting 96k/32 then maybe, I stress maybe, no dither is ok. Otherwise you get truncation errors, with a shower of unwanted side-effects and squeaks. That is one problem with digits rather than analogue. With digits you don't get extra random relatively benign noise with repeated undithered generations of copying, processing, transfers. The artefacts are much better described as errors and they are a shower of correlated noises. They are programme related, clock related or a combination of both so the ear is much more likely to pick them out as something less benign than two bits of pk-pk flat dither.
I understand the effects may depend on the programme material, but even two bits of pk-pk flat dither of a 16bit stream is typically 16dB to 20dB below the broadband background noise of a classical chamber music recording in a typical real-world venue. With commercial music the dynamic range tends to be compressed, so the dither will be even less perceptiable because there are fewer extended quiet sections of programme. I would prefer the effective noise level to increase by even a dB or so, if the alternative is gradually making a violin sound more and more like breaking glass from the effects of truncation.
We have been doing listening tests on dither in association with the development of new high-res delivery products. It has been interesting that no listeners detected dither as a noise 'problem' during any of the tests - even when we tried adding a lot more than 2bits' worth. In general either one noticed no change or a slight improvement subjectively with more than 2bits' worth of dither. The only negative thing we detected was that adding multiple layers of so-called random dither sometimes brought attention to the fact that it was sometimes not quite as 'random' as it should be.

EMail Link in SWF exported from InD CS5 does not work

I'm trying to find a definitive answer on this. I have designed an interactive document in InD CS5 that has buttons and hyperlinks. When exported to SWF everything works except my e-mail hyperlink. It works fine in InDesign's preview pane. I've uploaded the file to my webserver for testing, the problem still occurs.
I found one post in another forum that quoted an Adobe InD developer stating that as of CS4 email links were not exported. However, I've not been able to find any mention of whether this works in CS5 or not.
Does anybody know for sure whether or not email links work in SWF files exported from CS5?

Sorry, no offense was intended. I had found references to problems with CS4, but nothing about CS5, and said as much in my post -- was frustrated that I had spent a long time looking and hadn't found any responses yet.
You mentioned using buttons rather than hyperlinks, and that worked for me -- but it might have just been a problem with my browser not properly reloading the flash file, too -- as I mentioned in my response.
But in any case, THANK YOU FOR YOUR SUGGESTION!

When exporting project, result file does not work 100%

Similar Messages

Maybe you are looking for