When external speakers are plugged in to headphone jack, sound randomly goes back to internal speakers or digital audio setting, then back again

I have an essentially new MacBook Pro with Lion and all updates applied, and am wondering if this is a hardware or software problem.  Essentially with something plugged into the headphone jack, things work as they are supposed to for a while, then the sound will switch back to internal speakers, or sometimes 'digital out' (I can watch it change in the system settings), and then often switch back.  It doesn't seem to follow any sort of pattern or be related to any specific application that could be open, and happens with different sources of audio (iTunes, streaming from the web), and different external speakers or headphones plugged in.

Sounds hardware related. If it's brand new, and you're still under warranty I would have it checked out.
I have not experienced this on my computer.
As I understand it, you have analog RCA outputs from an 1/8" to left and right RCA outputs. when you're randomly using the computer, it'll switch to internal speakers, then to digital audio, back to your stereo analog external speakers.
This should not be happening and if it's happening with streaming content (I am unaware of anything that streams in 5.1 digital audio) then this must be something that an apple specialist should look at and consider.
Does this happen with the headphone jack out? when you hold your finger over the headphone jack area does a red beam come out of it *blinking* or just on? This will be a good indicator that your audio hardware is faulty. are you running HDMI out?

Similar Messages

  • Extremely slow performance when external drives are plugged in.

    I've had lots of freezing issues during startup just recently. After a lot of messing around I removed an iOmega Firewire HDD that was constantly plugged in and the freezing issues have gone. Great! But as I tried to plug it back into my machine once everything had loaded up, the machine became unusably slow.
    I've also tried plugging in USB drives, like my iPhone, camera and memory stick and it has the same effect.
    Anyone else had this same problem or any ideas how to fix it?

    HI,
    *"I've also tried plugging in USB drives, like my iPhone, camera and memory stick and it has the same effect."*
    How much free space on the startup disk? Might be an underlying issue ...
    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
    If you need to free up space on the startup disk go here.
    http://www.thexlab.com/faqs/freeingspace.html
    If free space is not an issue, then boot from your install disc and run Disk Utility.
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    *(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    Carolyn

  • Headphones are plugged into mini iPad but sound still coming from speakers

    When I was given this as a gift for Christmas, headphones worked great. Now it doesn't matter if headphones are plugged in or not the sound still comes out of the speakers. I made sure the headphones were in correctly and I've even plugged in different headphones. Is anyone having this problem?
    Do I need to take it back?

    I'm pretty sure they wouldn't be on here saying they tried many different headphones and not getting it fixed if they didn't push it in all the way.  Have you tried resetting your iPad and trying again? To reset it, press and hold the Home and Sleep/Wake button till you see the Apple on the screen and the iPad will reset.  After doing that, try again.

  • My ipod thinks speakers are plugged in

    I've had my ipod for close to a year now, and today is the first time this problem has happened. When I plug my ipod touch (4th generation) into the speakers (you use the part you charge the ipod to plug into the speakers), my ipod starts using its external speakers instead, and when I unplug the internal speakers, my ipod acts as if the internal speakers are plugged in. exerything on my computer has been updated and such, and I just updated my ipod, too, but this problem is still occuring. Weirdly though, I plugged my ipod into my computer, and now my earphones can work when I plug them in. I also tried to reset my ipod by turning it off for a while, but it turns right back on by itself afterwards. what's happening, and how can I get this to stop?

    You headphone jack is defective and needs to be replaced.
    Here is one third-aprty place.  Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Apple will exchange your iPOd for a refurbished one for:
    Apple - Support - iPod - Repair pricing

  • Nano plays music out loud even when ear buds are plugged in?

    Nano plays music out loud even when ear buds are plugged in? its like the external speaker is always on, i cannot figure out how to turn it off....HELP SOMEONE

    You don't have to shout - typing in caps.
    The earphones must be pushed very hard into the iPod. So hard, that the white part of the plug must touch the iPod in order for the external speakers to turn off. You will hear a click.
    
If you do a forum search, you will find this same solution. If it does not work, you will need to take your iPod to an apple store or call the Apple iPod tech support if still under warranty or you have Apple Care.

  • Music only plays thru the speakers by inserting a plug in the headphone jack. pavilion dv6-6127cl

    HP Pavilion dv6-6127cl  (Notebook PC)
    I have spent over 6 hours on the phone with tech support, but I remain unable to have any sounds go directly to my built-in "Beats" speakers.   I can make the speakers work if I insert a plug into the headphone jack on the keft side of the notebook.  If I plug in headphones to listen, I do get sound out of my headphones, but I also get sounds out of the builr-in soeakers.  Tech Support insisted that either I spilled liquid onto my keyboard. (I did not),  I dropped the notbook. (I did not), or the my computer was infected with a virus.
    I doubt that this problem was virus related, because the problem happened during a 4 month period that I had no internet service.  To be certain there are no viruses, I took the extreme action of restoring my notebook to the factory condition.  I still have the same problem.
    During my 6 hour troubleshooting marathon, the support technician had me update my BIOS and initiate many lengthy self-test procedures, all to no avail.
    Please send me information on who to send this laptop to for repair or replacement under the original warranty.
    I also have another issue.  Tech support claims that my notebook warranty expires in November, but I purchased this notebook from Sam's Club brand-new, in an un-opened box in mid-January 2012.  How can this date be explained and/or corrected?
    Many Thanks,
    Mike McKinney
    Rockledge, FL.
    USA
    (321) 636-3500

    Hello spl1080,
    Your headphone jack is not working correctly on the laptop.
    Was everything working correctly before you upgraded to Windows 8?
    I know that you said that you updated the driver, but did you try the driver for Windows 7 and 8.
    Here are the links for the drivers.
    Windows 7
    Windows 8
    If you are planning on sending it in to HP to have it repaired they will make you run a recovery before you send it in.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Let me know how everything goes.
    Have a good day.

  • When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

    If you see a red light in the audio output port, then the internal switch is stuck.  Insert the earphone plug a few times and see if you can trip the switch.  If that fails, insert a cocktail stirrer and the like and jiggle it around inside.  If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
    Ciao.

  • My iPad only has sound when the earphones are plugged in. The switch that controls the volume works then, but not when I take the earphones out. Suggestions?

    My iPad2 only has sound when the earphones are plugged in. The volume switch works then too, but not when I take the earphones out. Suggestions?

    it's a hardware issue
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more here
    iphone stuck in headset mode

  • My Mac Mini doesn't start up when usb devices are plugged in.

    My Mac Mini doesn't start up when usb devices are plugged in.
    It just shows the "White screen of Death" when 1 or more usb ports are used.

    Haha. I just restarted it and it worked. Instead of turning it off and on. But thanks.
    By the way:
    Note: It is possible that the SMC could encounter an issue that may cause unusual system behavior typically related to the symptoms described below. In some cases, resetting the SMC may be the only correct method to resolve the issue, however, an SMC reset should only be attempted after all other standard troubleshooting has been performed.
    So I hope it is fixed for now. But could someone also post another solution?

  • Macbook stuck in headphone (optical digital-out port) mode. Plugging and unplugging headphone jack no help.

    Stuck in headphone (optical digital-out port) mode. What do I do? Plugging and unplugging headphone jack no help.

    Do you see a red light in the headphone jack?? If you do, then the microswitch is stuck and you need to turn it off. Try poking it with a toothpick.
    If you don't see a red light, then try resetting the SMC and PRAM and see if these helps. Here are the links.
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379

  • The sound on my laptop is locked, cant plug in my headphone jack and there is no red light, The laptop is retina display and I am on panic mode?

    The sound on my laptop is locked, cant plug in my headphone jack and there is no red light, The laptop is retina display and I am on panic mode.
    I have researched the whole subject and the closest thing to my case is one with a red light. I tried the toothpic manoevre suggested by pany with no results. Please help me.

    System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • System Sounds Have Started Playing Through Internal Speakers

    I have a Presonus Firebox sound card through which I play all my audio. Suddenly and mysteriously, all my system sounds (email sent, email received, trash emptied, etc.) are going through my internal speakers, while all my apps remain as they were -- iTunes, FCP, Firebox, etc., all play audio through my sound card and speakers. In System Prefs, the Firebox is chosen as input, output and sound effects.
    Why is this happening, and how do I fix it?
    Thanks,
    Giraut

    Hi Giraut,
    I don't have such a device to check, nor even external speakers, but I suspect this invisible file is corrupted, I'd drag it to the desktop and see if you can set it again...
    /Users/YourUserName/Library/Preferences/ByHost/.GlobalPreferences<12digitHexNumb er>.plist
    Might check Midi Setup Utility to see if it's set for 44.1K also.

  • I can get video on airplay anytime but i cannot get audio all the time.  in sound output i select airplay but it only reverts back to internal speakers.  same if i try earbuds.  the only way to fix it is to restart computer.  what do i do to fix it,

    I can get video on airplay anytime but i cannot get audio all the time.  in sound output i select airplay but it only reverts back to internal speakers.  same if i try earbuds.  the only way to fix it is to restart computer.  what do i do to fix it,

    In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
    Switch off Mac
    Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
    Switch off Mac again
    Remove power cord and wait 15 seconds
    Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back.

  • Sometimes I cannot select an airport express to output sound from a current model mac air/10.9.3. The output jumps back to internal speakers or apple tv. Any ideas?

    Sometimes I cannot select an airport express to output sound from a current model mac air/10.9.3. The output jumps back to internal speakers or apple tv. Any ideas?

    Hello Cloud19,
    The article linked below provides some helpful information and troubleshooting that can help resolve issues with AirPlay and your Airport Express.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    Cheers,
    Allen

  • Sound output: keeps changing from internal speakers to Apple TV

    My iMac keeps changing the soudn output from internal speakers to Apple TV. Why. This makes it a pain. Eveytime I use the iMAc, I have to go into preferences>sound>output and switch to internal speakers. Any ideas how to stop this form happeneing?
    Thanks!

    If you use LogMeIn, it is their sound driver.  I'm having identical problem and it started after using LogMeIn.
    See this page;
    http://community.logmein.com/t5/Free/Mac-restore-defaul-sound-output-device-on-d isconnect/m-p/88522/highlight/false#M8093

Maybe you are looking for

  • Impact on Cell Editor

    Hi Gurus , If i'm using cell editor in my report . What will happen to this cells once i start the navigation or drill down on the same report ? Please advice Thank you BR

  • How to create logical system

    Hi, How to create logical system. Please help me with the steps for logical system creation in R3 system. Thanks, Kelly

  • New Nodes and writeXML

    Hi, i'm a beginner in XML world and a'm trying to add my nodes to the xml-output, that was generated by getMyView().writeXML(1,Row.XML_OPT_ALL_ROWS, xsl) from my BC4J. Smth. like: XMLNode e = (XMLNode)getMyView().writeXML(1,Row.XML_OPT_ALL_ROWS, xsl)

  • I am trying to download the trial version of indd and its says I need to select an application to open the link?

    When I select creative cloud nothing happens.

  • Using JMF

    I have just started using jmf i have created an application and on the machine with jmf installed the application works as expected. Migrated to another machine without JMF it does not work. i get a noclassdeffounderror: /javax/media/cannotrealizeexc