When extracting data some recors are missing

I am extracting data for inventory.
it is delta .When data is extracting from r/3 no process chain fails.
But some of the records are missing. it is only happening for inventory datasource
Please
guide me on this

Hi,
when we say records missing, where is this happening?
Is this at the Ds level or while update into the target.
Is the initialization done with any selection conditions, if yes then delta also will be fetched only for those selections.
Naveen.A

Similar Messages

In the last 36 hours my photos have jumbled within various albums. Random photos have attached at the end of an unrelated album, old photos have appeared again on Recently Added, some photos are missing but still on "collections". No date order

Within the last 36 hours my photo albums have turned into a real jumbled mess. Random photos have appeared at the bottom of my Recently Added album. In most cases it's a copy of a photo that was taken months or years ago so now it appears twice.. 200 random photos have appeared in an unrelated album. Some photos are missing completely. The date order is correct in some places and then it goes back and forth over the months and years. The "collections" appears to be okay. This morning when I went into the photo app About 50 photos that were permanently deleted 3 months ago reappeared on the Recently Added Album which I deleted again. if I delete these irreplaceable photos from the unwanted album it will delete the photo completely. Help please - this is so annoying and frustrating. I hate to think when I turn the iPad on tmoor row what else will have changed .

Quick Update:
I usually have my Mac laptop up with Messages running on it. As you know, it will receive the same messages you send/receive on your iPhone. I thought all my old photos would be there too, but they have all disappeared as well except for the last few.
Messages is supposed to archive all old photos to a directory called ~/Library/Messages/Attachments. On my mac, this was a 0 byte file that was created back in Jan 2014. As a result, none of the old photos got saved on my Messages app either. I looked at a Time Machine Backup and it has been the case since September (no earlier backups available). So, it's unclear how long this issue has been going on for my Messages app and how related it is to my iPhone problem.
In any case, if any of you use Messages, you may be able to recover your photos in that directory provided it didn't get trashed like mine did. I moved the file and created a new Attachments directory. Upon relaunch, Messages started properly storing new photos in there again.
Either there was a really terrible bug in the Apple software or something malicious has happened.
P.S. I'm running OS 10.9.5 Mavericks. There is a thread of people with this problem on Yosemite here:
No pictures are shown in Message om Mac
This seems like a pretty seriously terrible bug. I will be talking again to AppleCare on Wednesday and I hope they can escalate this.

I have 2nd gen. Ipod shuffle I restored it and now when i am trying to sync it, it is showing that some files are missing and it is not getting sync what should i do???

I have 2nd gen. Ipod shuffle I restored it and now when i am trying to sync it, it is showing that some files are missing and it is not getting sync what should i do???

Master reset...? Your device was jailbroken prior to you purchasing the device. The only symbol you should see on reboot is an Apple symbol. Download redsnow... google it! Download the latest version and your IPSW (ipod restore firmware) it has to be the correct version. And the "just boot tethered" should fix your device.
But that's only if you didnt back the device up. If you don't care about any of the data on the ipod then you can simply open itunes navigate to the device and click the restore button. This will restore the ipod firmware and install a fresh copy. Good luck let me know if you have any problems.

Some segments are missing in the idocs for master data zdebmas

hi guru's,
can any one hlep me here we facing the probelumm
some segments are missing in the idocs for master data zdebmas
, there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
There is some segments below is missing in the IDoc:
how to chcek this probelumm...

hi
i got the function module. it is triggerig whne i do changepointer running.
what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
my req is to show all segments even if i do changes in one segmet fields dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
can u plse help me the login or any function module which will fill the alla the segmetns .

When combine multiple PDFs into one, some letters are missing and display wrong letter

Hi all. I get a problem with combine multiple PDFs into a single PDF document. There are some PDF documents and they are working fine to open each document separately. But after I use Adobe Acrobat 8 Standard to combine them into one, some letters are missing and some display wrong letter (e.g. "forums" display "fo ums"). Our company has Adobe Acrobat 8 Standard, Adobe Acrobat 7 Professional and Standard. But all of them have some problem. Does anyone have idea for that? Please help me! Thanks very much!

I have a similar situation, but my PDFs look fine in Acrobat Pro 8,Acrobat Reader 8, and Apple preview, but are missing letters in Acrobat Pro 7. I think it stems from the files being combined all having the same font, but each having a unique subset stored in the respective files, but with the same name (and ID?), and when they are combined, the character sets are getting hosed somehow.

Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but p

Sometimes my ipod does not down load my entire library when I sync up with itunes, even if I have items loaded in the play list and can see them in the play list in my itunes when I check my ipod play list some items are missing part 1 will be there but part two is not. Why?????

How is your iPod configured to sync music from your iTunes library? In other words, what options and configurations do you have enabled from under the iPod's Summary and Music configuration panes in iTunes?
B-rock

'Some images are missing because they were deleted from the document'

Hi,
I created a document in Pages v5.2 last week and have just opened it and received the following message:
'Some images are missing because they were deleted from the document'
When I try and replace the missing images I get the following message:
'The image "filename" couldn't be inserted.'
When I try and reimport the original image I get the following message:
'The image "filename" couldn't be inserted. This image is of an unsupported type.'
If I try and insert an image that was not in the document before, in the same file format, it goes in fine.
If I insert the original image into a blank Pages document it goes in no problem.
I would also like to point out that the data folder still contains lots of versions of images in the document, but does not seem to have any of the ones I am actually using, which I guess is where the problem is. However I have no idea how or why these specific images have been deleted.
Any light on how this problem has come about, and the best possible way to fix it would be greatly appreciated.
Alex

I have Pages v5.2.2 on OS X 10.9.4. I can not reproduce your stated issues with images in this version of Pages. I don't have a solution for you. See my test in the third paragraph. If I were experiencing this behavior, I would perform a Safe Boot to clear out System caches, and try again, before kicking Pages v5+ to the curb.
The Safe Boot would be pressing and holding the shift key at boot chime, and until a horizontal progress bar shows on the screen. At the eventual login screen, after you type your password — press and hold the shift key — press the right arrow to login, and release the shift key after the Finder menu bar appears. Then reboot normally.
I have created a new document. Dragged and dropped an image into it and saved. Exited Pages. Reopening worked fine. Deleted the image, and proceeded through the following steps, punctuated by save, exit, reopen, and deliberate image removal. Different .jpg image each time. About mid-way through the following item list, I rebooted the MBA just to throw some "spin" into the process. I did not perform a Safe Boot prior to this series of tests.
Toolbar > Media insert
Insert > Choose jpg into document
Text Box image fill
Shape image fill

Some parameters are missing values

I am trying to invoke a crystal report using JRC API. I am using Business Objects XI.
When I try to invoke the report after setting all parameters I am getting an error message "Some parameters are missing values ". Here is how my JSP code looks like
ReportClientDocument oReportClientDocument = new ReportClientDocument();
oReportClientDocument.open(reportName, 0);
CrystalReportViewer oCrystalReportViewer = new CrystalReportViewer();
//set the reportsource property of the viewer
oCrystalReportViewer.setReportSource(reportSource);
//set viewer attributes
oCrystalReportViewer.setOwnPage(true);
oCrystalReportViewer.setOwnForm(true);
//set the CrystalReportViewer print mode
oCrystalReportViewer.setPrintMode(CrPrintMode.ACTIVEX);
//refresh the CrystalReportViewer if necessary (only required once)
if (session.getAttribute("refreshed") == null)
oCrystalReportViewer.refresh();
session.setAttribute("refreshed", "true");
String userid="emagia";
String password="emagia";
String rptuserid="tjordan";
String fromdate="07/01/2008";
String todate="07/12/2008";
ConnectionInfo ci = new ConnectionInfo();
ci.setUserName(userid);
ci.setPassword(password);
ConnectionInfos connections = new ConnectionInfos();
connections.add(ci);
oCrystalReportViewer.setEnableLogonPrompt(false);
oCrystalReportViewer.setDatabaseLogonInfos(connections);
ParameterFieldDiscreteValue val1 = new ParameterFieldDiscreteValue();
val1.setValue(rptuserid);
Values vals1 = new Values();
vals1.add(val1);
ParameterField param1 = new ParameterField();
param1.setName("User Id");
param1.setReportName("");
param1.setCurrentValues(vals1);
Fields fields = new Fields();
fields.add(param1);
ParameterFieldDiscreteValue val2 = new ParameterFieldDiscreteValue();
val2.setValue(fromdate);
Values vals2 = new Values();
vals2.add(val2);
ParameterField param2 = new ParameterField();
param2.setName("Date Range from");
param2.setReportName("");
param2.setCurrentValues(vals2);
fields.add(param2);
ParameterFieldDiscreteValue val3 = new ParameterFieldDiscreteValue();
val3.setValue(todate);
Values vals3 = new Values();
vals3.add(val3);
ParameterField param3 = new ParameterField();
param3.setName("Date Range To");
param3.setReportName("");
param3.setCurrentValues(vals3);
fields.add(param3);
oCrystalReportViewer.setEnableParameterPrompt(false);
oCrystalReportViewer.setParameterFields(fields);
oCrystalReportViewer.processHttpRequest(request, response,getServletConfig().getServletContext(), null);
oCrystalReportViewer.dispose();
In the Tomcat log this is what I get
- JRCAgent3 received request: refreshData
- JRCAgent3 attempting to acquire license
- JRCAgent3 successfully acquired license
- JRCAgent3 releasing license
- JRCAgent3 received request: getPromptConnInfos
- JRCAgent3 received request: compoundRequest
- JRCAgent3 received request: setSQLLogonInfoRequest
- JRCAgent3 received request: setSQLLogonInfoRequest
- JRCAgent3 received request: fetchReportPageRequest
- JRCAgent3 attempting to acquire license
- JRCAgent3 successfully acquired license
- Logon: Connecting to database using local JNDI server ...
- Connection Opened null
- Connection opened (Connection: databaseType=JDBC serverName=reports_dsn.dsn state=open databaseDriverName=crdb_odbc.dll).
- Report parameters is not valid
- Report parameters is changed
- Handling report parameters changes
- Validating report parameters
- com.crystaldecisions.reports.dataengine.l: Some parameters are missing values
- The report requires parameter values that need to be supplied by the client before further processing
com.crystaldecisions.reports.dataengine.l: Some parameters are missing values
     at com.crystaldecisions.reports.dataengine.j.a(Unknown Source)
     at com.crystaldecisions.reports.dataengine.a9.a(Unknown Source)
Can anybody tell me why I am getting this error??
Any help will be appreciated.

The problem may be that you are setting your report date parameters as a string when you pass the value to the report.   If the JRC does not recognize the parameter value as the correct type, it will throw the error you see when trying to pass them to the report.
If they are a date type or a date time type in the report, they must be set as such using the Java Calendar object.
Below is an example of how one would pass a date parameter to a report:
//DATE VALUE PARAMETER.
     Calendar calendar = Calendar.getInstance();
     calendar.clear();
     calendar.set(2004, 1, 17);
     Date dateParamVal = calendar.getTime();
     pfieldDate.setName("dateParam");
     pfieldDVDate.setValue(dateParamVal);
     //Add the parameter field values to the Values collection object.
     vals5.add(pfieldDVDate);
     //Set the current Values collection for each parameter field.
     pfieldDate.setCurrentValues(vals5);
     //Add each parameter field to the Fields collection.
     //The Fields object is now ready to be used with the viewer.
     parameterFields.add(pfieldDate);
     //DATE-TIME VALUE PARAMETER.
     Calendar calendar2 = Calendar.getInstance();
     calendar2.clear();
     calendar2.set(2002, 5, 12, 8, 23, 15);
     Date dateTimeParamVal = calendar2.getTime();
     pfieldDateTime.setName("dateTimeParam");
     pfieldDVDateTime.setValue(dateTimeParamVal);
     //Add the parameter field values to the Values collection object.
     vals6.add(pfieldDVDateTime);
     //Set the current Values collection for each parameter field.
     pfieldDateTime.setCurrentValues(vals6);
     //Add each parameter field to the Fields collection.
     //The Fields object is now ready to be used with the viewer.
     parameterFields.add(pfieldDateTime);
     //TIME VALUE PARAMETER.
     Calendar calendar3 = Calendar.getInstance();
     calendar3.clear();
     calendar3.set(2002, 5, 12, 13, 44, 59);
     Date timeParamVal = calendar3.getTime();
     pfieldTime.setName("timeParam");
     pfieldDVTime.setValue(timeParamVal);
     //Add the parameter field values to the Values collection object.
     vals7.add(pfieldDVTime);
     //Set the current Values collection for each parameter field.
     pfieldTime.setCurrentValues(vals7);
     //Add each parameter field to the Fields collection.
     //The Fields object is now ready to be used with the viewer.
     parameterFields.add(pfieldTime);
Edited by: Merry Enns on Aug 5, 2008 8:11 PM

Crystal Report: ERROR - Some parameters are missing values

          mine report it possesses a single parameter ....
          this is the example of like tries of to change the value set up in the report...
          ERROR: Some parameters are missing values
          thanks help...
          EXAMPLE:
          <%@ page import="com.crystaldecisions.report.web.viewer.*"%>
          <%@ page import="com.crystaldecisions.report.htmlrender.*"%>
          <%@ page import="com.crystaldecisions.reports.reportengineinterface.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.reportsource.*"%>
          <%@ page import="com.crystaldecisions.sdk.occa.report.data.*"%>
          <%@ page import="com.crystaldecisions.common.keycode.*"%>
          <%@ page import="java.util.*"%>
          <%
          try {
          IReportSourceFactory2 rptSrcFactory = new JPEReportSourceFactory();
          String report = "report/ReportParametro1.rpt";
          IReportSource reportSource = (IReportSource) rptSrcFactory.createReportSource(report,
          request.getLocale());
          Fields fields = new Fields();
          ParameterField pfield1 = new ParameterField();
          Values vals1 = new Values();
          ParameterFieldDiscreteValue pfieldDV1 = new ParameterFieldDiscreteValue();
          pfield1.setName("CICCIA");
          pfieldDV1.setValue("SELECT descrizione, validoDa, validoA FROM tariffari");
          pfieldDV1.setDescription("Query Dinamica....");
          vals1.add(pfieldDV1);
          pfield1.setCurrentValues(vals1);
          fields.add(pfield1);
          CrystalReportViewer viewer = new CrystalReportViewer();
          viewer.setReportSource(reportSource);
          // layout
          viewer.setOwnPage(true);
          viewer.setBestFitPage(true);
          viewer.setHasLogo(false);
          viewer.setHasRefreshButton(true);
          // group navigation
          viewer.setHasToggleGroupTreeButton(false);
          viewer.setDisplayGroupTree(false);
          // page navigation:
          viewer.setHasGotoPageButton(false);
          // print/export
          viewer.setHasExportButton(true);
          //viewer.setPrintMode(CrPrintMode.PDF);
          viewer.setPrintMode(CrPrintMode.ACTIVEX);
          viewer.setIgnoreViewStateOnLoad(true);
          viewer.setParameterFields(fields);
          viewer.setEnableParameterPrompt(false);
          viewer.refresh();
          viewer.processHttpRequest(request, response, getServletConfig().getServletContext(),
          out);
          viewer.dispose();
          }catch(Exception e){
          out.println("Errore " + e.getMessage());
          %>


I am facing the same problem. After selecting an export option (PDF/RTF), the same error message is coming up.
          Also, what needs to be done for displaying export option of EXCEL?
          Thanks,
          Farzal

Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet thos albums appear on the nano icon on my desktop but none of the others. What's happening?

Just bought a nano and want to download some of my iTunes library. The "Music" button shows almost all my selections but some albums are missing, yet ONLY those albums appear on the nano icon on my desktop after being dragged there but none of the others. What's happening?
I've read some of the post here that I thought might help but they refer to titles (Music) and triangles in the "Devices" window which are nowhere to be seen when I open the "Devices" window.
I have iTunes 11.0.3 and Mac OS 10.6.8. Does this make a difference?

I should mention that, for the first problem, I do make sure that my new tracks are stored in the folder where I told iTunes that my music is in. Also, when I say the cataloging of my library stops short of cataloging all my songs, I have tried leaving the computer unattended for days (my computer's sleep mode is disabled). It always stops before cataloging all of my music regardless of whether I am doing something else while iTunes is cataloging, or if I just let iTunes be the only program that's open during the cataloging process.

Some fields are missing in Current Task - Designer Workflow Approval Task Process

Hi All,
I am using approval task process activity in designer workflow. When i go to the single task behaviour page, some fields are missing under Current Task Source.
Some missing fields are :
1. Assigned To
2.External participants
3. Form Urn
I am trying to get the above fields but not available. What could be the issue?
Puli Bala

Hi Puli,
I think your task list is corrupted, could you please try to associate your workflow to another task list in SharePoint Designer > Click Workflows on left navigation > Click to open your workflow > Under Settings section, select another task
list and test.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

I can't install itunes 11.0.4.4 and so I can't sync with IOS7 can't uninstall old Itunes error message saying some files are missing. What to do?

I am trying to install the latest version of Itunes so I can Sync with IOS7 but I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
I tried to just un-install the old version but my computer tell me it can't because some files are missing. I don't know how to find them or how to fixx my problem. Can anyone help?
Thanks

I keep getting an error message saying it can't dis-install the old version Missing itunes64 files.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Crystal Report "some parameters are missing values" while exporting/printin

I am able to pass parameters from a JSP to a crystal report through CrystalReportViewer and view the report. (I tried doing it using the code provided on this help forum. I was getting a message: "Some Parameters are missing values". I had to add 1 line: pfield1.setReportName(""); for every parameter field. And It worked..)
Now I can see the "Print" and "Export" buttons. But when I try to print or export the report, I get the same message "Some Parameters are missing values".

see posting "parameter driven export to excel" on April 26th

ISE Joined with AD but Some Groups Are Missing

Folks,
In my ISE, i have already joined my AD in a Windows 2008 server. But when I retrieve the groups with *, some groups are missing. I mean there is a group like XXX.COM\COMPANY\IDG\HR in my 2008 server, but i cannot retrieve that in my ISE, the group is Global. Is that a bug of ISE or are there some special limits in importing my groups into ISE?
Regards,

Sijian,
As a work around have you tried to use a more granular filter to bring in chunks of groups at a time.
The limit will be increased in future. You amy also read the discussion happened on the similar issue:
https://supportforums.cisco.com/thread/2160538
Supported link:
http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_man_id_stores.html#wp1059262
Jatin Katyal
- Do rate helpful posts -

When extracting data some recors are missing

Similar Messages

Maybe you are looking for