When Firefox tried to recover my two crashed windows, the first one was fine, but the second one only shows blank tabs, though their number is correct.

Just as it says in the description. I've looked through solutions for similar issues, but to no avail.
A funny thing is that in the "restore tabs" window that appeared after I tried to start Firefox again, it listed a number of my tabs among other blank tabs (of course they were not originally blank). None of these actually showed up, however. Confusing.

HI toothandclaw,
When you restored the window and clicked on the tabs that were blank, did the page show up? It could be that you have the do not load tabs until selected preference on. This can be changed in the Options/Preferences Menu.
However since the session is blank, it could also be that Firefox did not close properly because of a crash or a force quit. How did you quit Firefox before the session looked like this? Could you also show a screenshot?

Similar Messages

  • When I print from Firefox the first page prints fine but the 2nd and proceding pages print larger and partialy off the page

    Happens anytime I print while in firfox

    Looks like you have '''Print Background (color & images)''' enabled on for all three printers you have installed, Adobe PDF included. ''I see those settings in your More system details.'' That's why you are getting the grey (monochrome Laserjet) or blue background, but that should be printed on the first page, too.
    File > Page Setup - un-check that preference

  • When converting PDF into pdf995 or cutepdf the first page converts fine but the second page doesn't

    Any reasons why this would be happening - thanks??

    I think you're referring to third party PDF software.
    That's not an appropriate question for this forum which is devoted to Adobe Reader for iOS.
    Refer to the support provided by the developers for those pieces of software.

  • I recently bought a new PC and when I transferred my photos a number of them became distorted- the top half was ok but the bottom half were color shifted.  Also a number of them the top and bottom don't line up.  How can I fix this?

    I recently bought a new PC and when I transferred my photos a number of them became distorted- the top half was ok but the bottom half were color shifted.  Also a number of them the top and bottom don't line up.  How can I fix this?

    Hi, I see I haven't had any responses but these problems haven't been fixed.
    I still haven't been able to transfer purchases from my phone to my comp so consequently have stopped purchasing on my phone.
    I bought a couple of albums recently via itunes on my comp, and tried to tranfer them to my phone via a playlist, but the sync often crashes. One album transferred except for one song, and the other hasn't at all. What happens is that when I autofill from a playlist it often hangs for ages on the first song and then I have to quit the application altogether as nothing happens for ages. Basically, the whole Itunes software freezes. 
    After this I find it hasn't transferred any songs, but they do appear greyed out on my phone, which means it has transferred some basic data such as the titles, but not the song itself. When I try to repeat the process to complete the transfer Itunes tells me that it can't transfer because the songs are already on the phone, but they are not!! I can't click or remove on the greyed out items, so now I have a couple of almost full albums on my computer that I can't tranfer or install on my phone, and a whole bunch of greyed out songs on my phone that I can't play or remove!
    The rest of the problems as above still stand. I downloaded the latest itunes OS updates but nothing's changed. I haven't done the very latest iphone update yet though because it says you need to make sure your stuff is backed up, and I don't want to lose the purchases I made on the phone that I can't transfer to my comp. I'm planning on uninstalling itunes completely and reinstalling but I have little faith that this will fix the issue.
    Can someone please help at all?? I'm so sick of this!

  • I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

    I recently uploaded OSX 10.6.7 and ever since then, my Boris titler in FCP does not work with all the fonts, notably Avenir. It actually crashes FCP now. It was fine with the previous version. What's up Apple?

    I know what your'e going through, Gary.   OSX 10.6.7 is an absolute disaster.   Since I upgraded, I've had problems in FCP, Logic, Garageband, even issue dealing with peripheral hardware like external monitors.
    Before 10.6.7 my system was running fine.
    I've brought this up with Apple repeatedly.   They smile and shrug.   They've been helpful resolving the issues, but none of them has been easy to solve.  I have spent days, dealing back and forth with tech support, sending logs, etc., before solutions have been found.  
    I wish I could give you an answer to your question.   My only guess is that Apple has totally dropped the ball on this one.   In the future they should provide a disclaimer when they offer an upgrade.  Something like:   "Caution: all of your software may not function after this upgrade. But go ahead, you'll feel cool that your OS is the latest thing."
    As someone who has been with Apple for close to 25 years, I'm disturbed by what appears to be an increasing sloppiness in their work.   This is especially disturbing when you depend upon their system to make your living.
    Good luck.
    david

  • I don't know exactly when this started, but Winamp became my default search and homepage.. The homepage issue was easy, but the search issue is bigger than I expected. It ALWAYS uses Winamp (Powered by AOL) as my default search. Please help. Thank you.

    I don't know exactly when this started, but Winamp became my default search and homepage.. The homepage issue was easy, but the search issue is bigger than I expected. It ALWAYS uses Winamp (Powered by AOL) as my default search. Please help. Thank you.

    reinstall it but make sure to uncheck the box next to "make winamp my default search engine"
    attached is screenshot from the part of installation proces where that checbox should be unchecked
    hope this helps

  • When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

    When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.  I have tried to adjust the margins and the page setup settings but to no avail.  It used to print fine until recently.  Is there a way to fix it so that the printer prints what print preview shows?

    I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

  • When i use pogo, on the risk game for instance, when i click on a game room, a window pops up and immdediately reduces in size, this size only shows part of the battle screen; i have tried resetting the zoom feature, no luck.

    i have seen this before on my home PC (on a lap top now) it is impossible for me to correct so i have to use IE to play pogo (i dont like IE it is slower) i click on a game, i go to a game room, and a window normally pops up showing the tables. normally i click on a seat and it takes me to a new window and the game board. NOW, when this first window pops up, it is aboout 1/4 size of my screen, but immediately reduces in size to about 1/6 of my screen. wnen the game loads, i cannot view the whole screen only part of the screen, as if it is zoomed in. I tried your suggestion and reset the zoom, no help.... i changed the zoom level manally.... no help.
    this also happens in scrabble and most other games. it is related to the java i am sure, but it only happens on firefox. How do i correct this. I have uninstalled, and reinstalled firefox. i have had this happen on the older version of firefox. it happens on multiple computers so it isnt just one computer.
    HELP!!!!!
    please

    I should have explained further. The game opens in a new window over to the upper left of my screen, leaving the original page underneath. I tried minimizing it so that I could get to my toolbar and did the View > Zoom > Reset. This has no effect. The lower portion of the game is still not showing. Using other browsers the window or frame of the game is much larger, therefore everything shows.

  • Trying to set up a wireless guest network using Airport base station.  The first network setup was fine but the second one doesn't work.  Any suggestions?

    I purchased the new Airport base station that allows for a wireless setup of a primary network and a guest network.  The primary network installation worked great but I cannot get the guest network to work properly.  Any suggestions on how to make it work?

    The AirPort base station is designed to connect to a simple modem......not a modem/router or gateway device that is often furnished to users by Internet Service Providers.
    So, the first troubleshooting question would be to find out what the make and model of the device that you call your "modem" might be.....to see if you have the right kind of product that will allow the Guest Network to operate correctly.

  • TS1717 Error message received "iTunes has stopped working" when plug my classic ipod to laptop running window 7. It was fine before. Any idea what might be the problem and how to get it fixed? thanks!

    I have received window error message "iTunes has stopped working" everytime I plug my classic ipod to the laptop which running window 7. iTunes was working fine with the same ipod, but starts to receive the error msg. after the second plug to update the music files this morning. All the music files were removed from the ipod. Any idea what might cause the problem and how to get it fixed? thanks!

    Thanks! i finished to run Check your iPod with Diagnostics Mode. here is results:
    Retract:15
    Reallocs: 0
    Pending Sectors:0
    Poweron Hours:556
    Start/Stop:5071
    Right now, i am runing Check iPod hard-drive for errors and will let you know if it gets ipod fixed or not

  • Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more

    Why when I tried to update itunes it crashed and now I get a MSVCR80.dll was not found and can not start my itunes any more?

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • When im trying to recover my iphone its keeps on saying error (9) in itunes

    when im trying to recover my iphone its keeps on saying error (9) in itunes   i tried everything and nothing seems to be working

    Configure your security software
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Resolve specific iTunes update and restore errors - Support - Apple

  • I have an iphone 5. I have no idea of the ios version in it. Recently i broke my iphone screen and its showing up nothing. it was never synced to itunes or to any pc. When i tried to connect iphone to itunes in my pc it was asking was passcode which

    I have an iphone 5. I have no idea of the ios version in it. Recently i broke my iphone screen and its showing up nothing. it was never synced to itunes or to any pc. When i tried to connect iphone to itunes in my pc it was asking for passcode which i had forgotten ages ago. Suggest me the possible ways to recover my iphone.

    Since the screen doesn't work, it will be challenging to get it working, even thru iTunes. You will need to ask yourself if you want to invest more money in it or get a new one, especially since the contents will be lost since you don't know the passcode. Apple will gladly replace the screen for a cost that represents a significant portion of the price of a new. Once the screen is done, you may or may not be eligible for the free iPhone 5 Battery Replacement Program.
    Or, if you decide to salvage it and are strong of heart and firm of hand, you can replace the screen yourself for less. See here and note they carry kits with all needed tools and parts.

  • Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

    Hi I have a question about shooting in Raw with my Canon EOS 6d.
    I'm in the process of learning photography and my goal was to start shooting in raw.
    I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
    Heather

    In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
    That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
    Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
    I'd appreciate any advise on which route to go and how upgrade and what it may cost.
    It all depends on your preferred workflow and your budget.
    Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
    Camera raw, DNG | Adobe Photoshop CC
    Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
    Creative Suite 6
    Or join the Cloud and pay the monthly fee
    Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

  • When i tried to reinstall my lion to macbook pro 15'' and connect it to the net it says no installing information for this machine? what's that means??

    when i tried to reinstall my lion to macbook pro 15'' and connect it to the net it says no installing information for this machine? what's that means??

    The internal drive has failed.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    *An SSD doesn't need to be zeroed.

Maybe you are looking for