When going through open tabs, they will randomly stop loading correctly, instead causing the windows to stack on each other.

The pages will start to merge into each other, or something, usually with a delay after trying to get to a different tab. It's realy hard to explain what I mean, so look at the screen shot. This time it was a bit cute due to what parts of the pages I was on merged together, but still really disruptive.
Once it starts happening, Firefox becomes unusable until I shut down the process with task manager. What can I do to make this all stop?

Please make sure that all of your plugins are up to date.
*[https://www.mozilla.org/en-US/plugincheck/]
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Similar Messages

If I would like to have all opened tabs in my browser stop loading a webpage is their a shortcut key that will allow this?

If I open too many Bookmarked pages into tabs my browser will hang and then sometimes crash or close unexpectedly.
If I bring up task manager or use the Alt + Tab I can navigate to the window and right-click and choose restore to allow me to see the window again. This needs to be done if I load more than 10 pages at once. Is there a way to choose to prevent loading of all opened tabs and then choose which tabs I'm currently working with to load the webpage? I would like to know how to use a shortcut key on my keyboard to select all tabs as ctrl + A does not work and then escape or another key tells to stop all pages from loading in each tab as with all the ads, gifs, videos, and internet spam keeps growing it is too much of a strain to have multiple webpages opened in tabs on the browser.
I use Win XP SP2 and I am eagerly waiting a solution as it has been an issue with even previous versions of Firefox however IE could only have about 3 tabs opened and then would crash that is why I stick with Firefox as my browser of choice.

Just saw your posting from yesterday - https://support.mozilla.com/en-US/questions/876195
https://addons.mozilla.org/en-US/firefox/addon/checkplaces/ <br />
'''Checks your bookmarks are valid and the pages still exist, checks for duplicates ...'''

HT1277 I have changed my email account on my computer to imap and 993 but now I'm not receiving any emails. I was originally trying to sinc my ipad and iphone and computer together so when I delete an email it will all delete together. What is the best wa

I need help to update my email and also to sinc my computer, iphone and ipad together so when I delete my emails they will all disappear together. I got the iphone and ipad to work but cant seem to get the computer to work.

E-mail provider?
Troubleshooting sending and receiving email messages

Youtube randomly stops loading

I recently got a new modem, and ever since then I've noticed YouTube videos will randomly stop loading (particularly longer ones, although I have had short videos stop loading too). Switching to HTML5 video player seems to let me play videos without having any loading issues.
- I've tried resetting my router.
- Reinstalling Adobe Flash Player 14.0.0.125
- Clearing my recent history
- Flushing my dns
I'm not really sure what else to do, I'm assuming it has something to do with my new modem, but I have no idea how to fix this.
Any help would be much appreciated, I'll be using HTML5 until I know how to fix this.

Still really hoping someone would be able to help me, or if someone can point me somewhere that can help.

When going through photos how can i see if they are in an album

when going through photos how can i see if they are in an album

~Not quite the same but you can find all the images that are not in an album (or vice versa) with a Smart Album.
File -> New Smart Album
Album -> is not -> Any

How do I keep the find bar open when scrolling through multiple tabs?

The newest update of Firefox doesn't allow me to keep the find bar open when shifting through multiple tabs. I've tried Findbar tweak however that erases the search criteria as soon as I try to scroll down the page to the next location. Anyone know how to keep the find bar open when i shift from one tab to the next?

There is a more up-to-date "beta" version of FindBar Tweak you could try, if you haven't tested it already. You can find it on the extension's "Versions" page here:
https://addons.mozilla.org/firefox/addon/findbar-tweak/versions/
I did see one other extension with a similar purpose (I haven't tried it myself):
https://addons.mozilla.org/firefox/addon/globalfindbar/

Photos show up as thumbnail but when I click on them they will not display

Photos show up as thumnails but when I click on them they will not display. I get a exclamation mark in a dotted line box

Hylan:
That occurs when the library has lost the link to the original file. This is a result of a damaged library database file, Library6.iPhoto. You can try rebuilding the library from within iPhoto to see if you can recover the photos by launching iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the first three options. However, it's iffy.
You can rebuild the library with iPhoto Library Manager as it create a new library, leaving the original one intact, by reading the AlbumData.xml file and copying what it needs. You will be able to recover the photos, albums, keywords, titles and comments. However, books, slideshows, and calendars will not be recovered. Here's how:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 -Download iPhoto Library Manager and launch.
2 -Click on the Add Library button, navigate to your User/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File->Rebuild Library menu option
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: It may take some time to create the new library if you have a lot of photos. Report back on how long it took and how many photos you have in the library so we can give other users an idea of how long it may take.
It that doesn't work you'll have to start over with a new library and import the Originals folder from the old library as follows:
Creating a new library while preserving the Events from the original library.
Move the existing library folder to the desktop.
Open the library package like this.
Launch iPhoto and, when asked, select the option to create a new library.
Drag the Originals folder from the iPhoto Library on the desktop into the open iPhoto window.
This will create a new library with the same Events as the original library if you have the Finder checkbox unchecked in the Events preference pane.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

When I have opened newstand it will not close like other apps. I have to shutdown the iPad completely why

When I have opened newstand it will not close like other apps. I have to shutdown the iPad completely why?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

Safari shortcuts dont work for navigating through open tabs

I read that Control-Tab or Control-Shift-Tab are shortcuts that navigate left and right through open windows in Safari.
I also ready that CMD-Shift-left arrow navigates to the left. But only moves once, and if you select same with right arrow, nothing happens.
Under Settings Application shortcuts, there are no setting setup for CMD-Shift-left arrow so I guess that this is 'built in'?
I would like to navigate using keyboard shortcuts left and right through open tabs in Safari. Please can you advise as I am stuck with the above and they dont help me....
Thank you.

Thanks! The shortcut can be set like this in AI, although all key combinations I would want to use are not allowed. Too bad. But anyways, thank you very much for the tip!
cmd+~ is not an option for me, I guess, since the swiss/german keyboard layout has no dedicated tilde key.
So, I have a working shortcut in PS (ctrl+tab / of which I still don't know how to change, if possible at all) and thanks to you, I can now set one in AI as well. Unfortunately, I can not set it to be identical as in PS, since the "cmd" key needs to be included in AI's shortcut assignment dialogue, but I guess, this is as good as it gets.

Dreamweaver 6.1 - JavaScript error when switching between open tabs

When switching between open tabs a sequence of javascript
errors occurs. I had not used Dreamweaver for about 2 weeks, and
last time I used it with no problems.
I have tried uninstalling it, OKing removal of all files when
asked, re-installing it and updating with dwmx61_updater.exe, but I
still get the same errors.
This has rendered the software virtually unuseable, so any
help would be greatly appreciated, as I'm working to a
rapidly-approaching deadline.
"While executing Browse_Back enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Forward enabled in toolbars.xml, a
JavaScript error occurred"
followed by
"While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error occurred"
The relevant code seems to be :

<toolbar id="Browser_Toolbar" platform="win"
label="Browser Navigation" container="document"
initiallyVisible="false">
<button id="Browse_Back"
image="Toolbars/images/MM/back.gif"
disabledImage="Toolbars/images/MM/back_dis.gif"
tooltip="Back"
label="Back"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
command="dw.getDocumentDOM().browser.backPage()"
update="onEveryIdle"/>
<button id="Browse_Forward"
image="Toolbars/images/MM/forward.gif"
disabledImage="Toolbars/images/MM/forward_dis.gif"
tooltip="Forward"
label="Forward"
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
command="dw.getDocumentDOM().browser.forwardPage()"
update="onEveryIdle"/>
<button id="Browse_Stop"
image="Toolbars/images/MM/stop.gif"
disabledImage="Toolbars/images/MM/stop_dis.gif"
tooltip="Stop"
label="Stop"
enabled="dw.getDocumentDOM().browser.getPageBusy()"
command="dw.getDocumentDOM().browser.stopPage()"
update="onBrowserPageBusyChange"/>
<button id="Browse_Refresh"
image="Toolbars/images/MM/browserRefresh.gif"
tooltip="Refresh"
label="Refresh"
enabled="true"
command="dw.getDocumentDOM().browser.refreshPage()"/>
presumably the next error is caused by the previous ones
failing :
"While executing getCurrentValue in AddressURL.htm, a
JavaScript error occurred"
the relevan tcode :
function getCurrentValue()
var dom = dw.getDocumentDOM();
var value = dom.browser.getURL();
if (value && value.length)
//check if is it not a temp file
//extract the tail of the url
var filename = value;
var slashIndex = filename.lastIndexOf("/");
filename = filename.substring(slashIndex+1);
var tempIndex = filename.indexOf("TMP");
if (tempIndex != 0)
addRecentAddress(value);
return value;

You can try this simple fix -
Quit DW.
Find this folder -
C:\Documents and Settings\<username>\Application
Data\Macromedia\Dreamweaver
8\Configuration\WinFileCache-*.dat
(these folders are normally hidden - you may have to use
Explorer > Tools >
Folder Options to unhide them)
and delete it.
Restart DW. Works better?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"earthdoctor" <[email protected]> wrote in
message
news:[email protected]...
> When switching between open tabs a sequence of
javascript errors occurs. I
> had
> not used Dreamweaver for about 2 weeks, and last time I
used it with no
> problems.
>
> I have tried uninstalling it, OKing removal of all files
when asked,
> re-installing it and updating with dwmx61_updater.exe,
but I still get the
> same
> errors.
>
> This has rendered the software virtually unuseable, so
any help would be
> greatly appreciated, as I'm working to a
rapidly-approaching deadline.
>
>
> "While executing Browse_Back enabled in toolbars.xml, a
JavaScript error
> occurred"
> followed by
> "While executing Browse_Forward enabled in toolbars.xml,
a JavaScript
> error
> occurred"
> followed by
> "While executing Browse_Stop enabled in toolbars.xml, a
JavaScript error
> occurred"
>
> The relevant code seems to be :
>
> 
>
> <toolbar id="Browser_Toolbar" platform="win"
label="Browser
> Navigation"
> container="document" initiallyVisible="false">
>
> <button id="Browse_Back"
> image="Toolbars/images/MM/back.gif"
> disabledImage="Toolbars/images/MM/back_dis.gif"
> tooltip="Back"
> label="Back"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('back')"
> command="dw.getDocumentDOM().browser.backPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Forward"
> image="Toolbars/images/MM/forward.gif"
> disabledImage="Toolbars/images/MM/forward_dis.gif"
> tooltip="Forward"
> label="Forward"
>
enabled="dw.getDocumentDOM().browser.isCmdEnabled('forward')"
> command="dw.getDocumentDOM().browser.forwardPage()"
> update="onEveryIdle"/>
>
> <button id="Browse_Stop"
> image="Toolbars/images/MM/stop.gif"
> disabledImage="Toolbars/images/MM/stop_dis.gif"
> tooltip="Stop"
> label="Stop"
> enabled="dw.getDocumentDOM().browser.getPageBusy()"
> command="dw.getDocumentDOM().browser.stopPage()"
> update="onBrowserPageBusyChange"/>
>
> <button id="Browse_Refresh"
> image="Toolbars/images/MM/browserRefresh.gif"
> tooltip="Refresh"
> label="Refresh"
> enabled="true"
> command="dw.getDocumentDOM().browser.refreshPage()"/>
>
>
>
> presumably the next error is caused by the previous ones
failing :
>
> "While executing getCurrentValue in AddressURL.htm, a
JavaScript error
> occurred"
> the relevan tcode :
>
>
> function getCurrentValue()
> {
> var dom = dw.getDocumentDOM();
> var value = dom.browser.getURL();
> if (value && value.length)
> {
> //check if is it not a temp file
> //extract the tail of the url
> var filename = value;
> var slashIndex = filename.lastIndexOf("/");
> filename = filename.substring(slashIndex+1);
> var tempIndex = filename.indexOf("TMP");
> if (tempIndex != 0)
> {
> addRecentAddress(value);
> }
> }
> return value;
> }
>
>

How to change keyboard shortcut for cycle through open tabs in PS and AI CC 2014

I would love to set my own keyboard shortcuts for cycling through open tabs in PS and AI 2014 on OS X. I found out that this can be achieved with ctrl+tab in PS, but I couldn't manage to make any of the suggestions in the forum work for AI. As said, I would like to set a more "standard" shortcut like alt+cmd+arrow-keys for both of the apps. If that shouldn't be possible, does anyone know a shortcut in AI CC 2014?
Many thanks!
Amadeus

Thanks! The shortcut can be set like this in AI, although all key combinations I would want to use are not allowed. Too bad. But anyways, thank you very much for the tip!
cmd+~ is not an option for me, I guess, since the swiss/german keyboard layout has no dedicated tilde key.
So, I have a working shortcut in PS (ctrl+tab / of which I still don't know how to change, if possible at all) and thanks to you, I can now set one in AI as well. Unfortunately, I can not set it to be identical as in PS, since the "cmd" key needs to be included in AI's shortcut assignment dialogue, but I guess, this is as good as it gets.

After I installed my iWork then when tried to open it it will not open what should i do?

After I installed my iWork then when tried to open it it will not open what should i do? Please help.

Make sure that you have a good speaker line with no kinks. Also, check with another device to amke sure it is not just your speakers.

After I installed my iWork then when tried to open it it will not open what should i do? it could not

After I installed my iWork then when tried to open it it will not open what should i do? Please help.

Does it successfully connect to other networks?
Do other devices successfully connect to this network?
Have you tried everything here?
iOS: Troubleshooting Wi-Fi networks and connections
Have you restored the iPod?
BTW, say that you "tried all troubleshooting instructions " with referencing what you tried provides us with little info as to what you did try.

I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.

I lost all my unpinned 30 tabs and could not restore it, when Adobe update opened a link by firefox, which was not running in the background.
I guess what I have experienced might be a special case of 'Restore previous sessions'. The actual situation was that after I rebooted my laptop, Adobe update jumped out indicating an update being finished successfully. After I clicked on the 'close' button of the Adobe window, it automatically started firefox and linked to its website. But I did not find the 'Restore previous sessions' page this time. Then I restarted firefox, this time there was a start page with 'Restore previous sessions'. However, sadly enough, it is only restored my pinned pages plus the Adobe website. Actually, I am using 'bookmark all tabs' from time to time to secure opened tabs, but this time I did not expect such an incident. I would suggest to improve the 'Restore previous sessions' with multiple time tags and appear in all cases including my reported case here, after updating firefox, crashes etc. I like firefox in most occasions, therefore believe and hope it becomes better and more robust. Thank you very much!

Hi,
Please see the following support request: http://forums.mozillazine.org/viewtopic.php?f=38&t=2628065
I think the best option would be to leave feedback here to let the relevant development team know about the problem you have had: https://input.mozilla.org/en-GB/feedback
Also you could try the [https://addons.mozilla.org/en-US/firefox/addon/session-manager/ Session Manager] add-on which gives more control over how sessions are restored.
I hope that helps

How can I show additional tab rows when using many open tabs?

How can I show additional tab rows when using many open tabs?

What method (code) did you use to get the Tab bar displaying in the space used for the Navigation Toolbar (location bar)?
The Tab bar should be displayed above the Navigation Toolbar.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

When going through open tabs, they will randomly stop loading correctly, instead causing the windows to stack on each other.

Similar Messages

Maybe you are looking for