When going to some sites such as Cabela's etc..a certain page pops up not letting me go there--the name of the page is Check Point software--wanting to know password etc...need help!!!

the page blocks me from going to a bunch of site---says the site is sponsored by Check Point software..Cabela's is just 1 of the sites i cannot go to

Check Point is the company that makes ZoneAlarm, a firewall-antivirus, et al security software suite. They also offer large-scale security "solutions" for companies.
I thought perhaps the blocking may have been coming from your end, i.e., if you were using ZoneAlarm. Can you reproduce this using Internet Explorer or some other browser?
Also, I'm assuming this is happing while using your personal computer and not coming from a work computer. If you're being blocked while using a work computer, that's your answer...

Similar Messages

When I click on an Icon on my desktop to take me to a site (such as google) I get a message that it could not find the loaction. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened.

When I click on an Icon on my desktop to take me to a site (such as Google) I get a message that it could not find the location. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened. Then when I close the window I see that the message is still there. I have to close it separately. Any suggestions? Oh, and this only happens if Firefox is NOT already active. If I have another Firefox window open when I click on the Icon, it just opens as expected. This message appears no matter which site Icon I select. It did not happen before I upgraded to ver 9.0.

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

When going to a site to view a web cam what is a plug in what do i need

When going to a site to veiw the a web cam it says i need a plug in?

You make it almost impossible to help you without knowing any specifics. First what version of OS X is loaded on your computer, which browser do you use, provide an example of a web cam's URL etc...
PLEASE complete your profile, you will find it by clicking Your Stuff in the upper right of this page then click Profile and fill out the pertinent information.

What is the name of the tooltips that shows up when you hover over a UIbutton?, such as "back", "foreward", "home" etc

Okey so basically I've themes my windows 7 into a black state.
The thing about that is that the default font color firefox uses for tooltips and other information is back so its quite impossible for me to read.
After a while googleing I found out that something called userChrome.css can be used so naturally I looked furhter.
I found answers for almost everything I was looking for, except these "button tooltips".
Heres my userChrome.css code:
menubar, menu {
color: black !important;
menupopup > menu,
menupopup > menuitem,
popup > menu,
popup > menuitem {
color: white !important;
tooltip, statusbar {
color: white !important;
Basically it takes care of all text that was black and turns it the way I like it.
So what is the name of the tooltips that shows up when you hover over a UIbutton? such as "back"
With the correct name I should be able to add
name {
color: white !important
and it should work just fine :)

hey 88_King,
go to http://support.lenovo.com and download any one or all the software you require from here.
and most of the items you need is under ThinkVantage
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

I have a problem with my iPad 1 st. the problem is that I unable to locate even when connected to a WiFi network and the location is activated and restore and same thing happens .. may be I need help! Thank you ...!

I have a problem with my iPad 1 st. the problem is that I unable to locate even when connected to a WiFi network and the location is activated and restore and same thing happens .. may be I need help!
Thank you ...!

Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

When I try to install iTunes 10.5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.

5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.

After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much!

RH9-change the name of the project after it's been generated & released as help site.

I'm a novice non-programmer working in RH9 - client wants to change the name of the project that appears at the top of Internet Explorer. The project has been generated & released to their internal website. I've changes every file name I could find as well as the name in the title bar when you first generate it within RH. Any words of wisdom &/or advice are welcome.

It's not clear whether you are trying to do this the correct way which will require generating the help again or whether you are trying to change it just in the output on the server.
The latter is not good practice as it will get forgotten next time you generate and you will be back to square one. If you must do that, then it should be as simple as changing the start page title. You will need a copy of the file from the server. Open it locally and change the <title>, then upload it again.
The correct way is to go to Project Settings and change the name there, then regenerate.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Hello. My mac can't connect to my time capsule. There is no response and I can't put it back to the originals definitions because all my files are there and I can´t loose them. (sorry about my bad english, but I really need help!)

Your files are unaffected by a reset.. no reset via the reset button on the TC harms, deletes or does anything to your files.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Here is how to do a fully manual setup for TC which is sometimes necessary with Mavericks in particular.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

Anyone know the name of the site for guest maps, comments, etc?

Hi,
Does anyone know the name of the site that has lots of iWeb things, they have many kinds of guest maps, sunlit earth maps, comments you can add to iWeb, etc. They had lots of cool things and I can't find them.
All help appreciated.
Thanks,
Todd

This isn't the particular site you're looking for, but it may qualify as "cool": "NeoPlanet displays your blog's visitors on a rotating 3D Earth globe composed of actual NASA satellite images." Click below to go to the site...
And perhaps this is the "iWeb Tool Chest" site you were thinking of (click on the icon):

Where is the forum for TFS, I have found an issue related to its database I need help

Hello,
Where is the forum for TFS, I have found an issue related to its database I need help
One of the encrypted Stored Procedure is throwing an error and I have no
idea how to fix the problem.
EXEC dbo.InstallWorkItemWordsContains
FOR XML could not serialize the data for node 'nt_user_name' because it contains a character (0x0000) which is not allowed in XML. To retrieve this data using FOR XML, convert it to binary, varbinary or image
data type and use the BINARY BASE64 directive.
Msg 3616, Level 16, State 2, Line 1
An error was raised during trigger execution. The batch has been aborted and the user transaction, if any, has been rolled back.

Hello,
Here are the
Visual Studio Team Foundation Server forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.

My Mac was updated to Ÿosemite OS and since then the PS5 software doesn't open. I need help on this subject please.
They error message I get is "An unexpected and unrecoverable problem has occurred. Photoshop will now exit."
This only started after I upgraded my OS to Yosemite.

The upgrade has been know to break Photoshop CS5 installs. An Uninstall/Reinstall may be necessary.

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

New tabs are not updating the names of the sites they have loaded. When I open a new tab and load a site, the tab simply stays named "New Tab". When I open a link in a new window, it shows "Connecting..." even while its fully loaded.

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?

When typing the name of the contact I want to send a text message to, names from my contact list no longer pop up as suggestions. Can anyone help me with this?

There's always a way to reset the device jmn33! Thanks for keeping us in the loop. To process a full reset/restore on the device please visit http://vz.to/12TLCsR. Please keep us posted once this is completed, thanks!
MatthewS_VZW
Follow us on Twitter @VZWSUPPORT

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

All of my apps on my new ipad2 are not working. I had this iPad about 4 months and nothing bad has happened before this. I need help on how to make my apps stop crashing. All my built in apps are fine though.

All of my apps on my new ipad2 are not working. I had this iPad about 4 months and nothing bad has happened before this. I need help on how to make my apps stop crashing. All my built in apps are fine though. WHATBCAN I DO TO MAKE MY APPS STOP CRASHING. I ALREADY TURNED IT OFF THEN ON AGAIN AN IT STILL CRASHES. HELPPP!!!!

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

When going to some sites such as Cabela's etc..a certain page pops up not letting me go there--the name of the page is Check Point software--wanting to know password etc...need help!!!

Similar Messages

Maybe you are looking for