When I activate source system in BW, problem with IDoc (ZSBB027) occurs.

Hi,
I made some enhancing data source in R3 and when I would replicate and activate source system in BW, some error message occurs:
"Type IDoc ZSBB027 BW is not like IDoc in source system,
Incorrect IDoc ZSBA0003 in definition source system."
Can I find which data source is bad?
Thank You very much.

Hi,
there is no need to activate ur Source system unless if there is any problem in ur Source system.
When ever u do some changes in ur data source then replicate that into ur BW by going into RSA1-> Source system-> right click , Replicate data source. later u can assign that to ur info source..
Once if u do the replication then u have to activate ur Transfer rules by executing RS_TRANSTRUE_ACTIVATE_ALL.
Hope it helps-
Regards-
MM

Similar Messages

  • How to de-activate source system in BI system...?

    How to de-activate source system in BI system...?
    Regs,
    Naren..

    Hi,
    I feel we cant de activate the source system. Either we can aceive to do any of the following method:
    1. Delete the source system
    2. Remove the RFC Destination.
    3. Remove the authorization to load the data.
    I dont know why you are asking to deactivate the system. Coz this will not cuase any problem to you for any testing in the landscape. One more thing if you will do any of the above three activity, then Basic guys only rollback the actual situation.
    So please be confident before doing this task.
    Regards,
    Vivek V

  • WHEN I CREATE  SOURCE SYSTEM IN BW

    Hi,
      When i create source system in BW  it is automatically saying that it has
    RFC Destination already  exists in the source system. Do you want to transfer,check this
    destination or cancel the source system?
      it has three option copy,check,cancel
    i have done check, copy..it says
    RFC CONNECTION CHECK FAILED.CHECK CONNECTION.
    Please help

    Hi,
    1. Check for parameters specified .e.g. password. user name , authorization for the user , ip address etc.
    2. While creating source system 1st time in the BW , R/3 client should be open and its status should be changes allowed
    .(SCC4-> Double click the client ->
    Changes to transport & client specific setting
           Changes without automatic Recording
    Cross Client object changes
           Changes to repo. client ind. object allowed
    Hope that helps.
    Regards
    Mr Kapadia

  • Multiple usage of Source System is not possible with installed DMIS version on source

    Hello folks!
    I`ve got a problem trying to adjust the Data Replication to SAP BW (on HANA) using SAP LT Replication Server.
    I`ve deleted one connection and after that I`m trying to create new one through  Configuration & Monitoring Dashboard (transaction LTR) with the same source / target systems.
    As result when on the second step (Specify Source System) I specify RFC destination of the source system it appears an error with text
    "Multiple usage of Source System is not possible with installed DMIS version on source".
    But there`s no any adjusted connection in system now..
    Please, help me to understand  how to fix that problem, I can`t find a solution

    Hi,
    When you say that you 'deleted one connection', did you delete the RFC connection or the SLT Configuration? If it is not a real multiple usage scenario, then deactivate the 'allow multiple usage' flag, else install the correct DMIS version on both SLT and source.
    Thanks
    kris

  • With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

  • Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the online.

    Is there a way to play video clips that use adobe flash and if not when are you going to resolve your problem with them ? I won't buy another apple product until you do and I Know I,m not the only one.

    Use the search feature and type in Flash and there are like thousands of posts on this.
    You seem to think you are addressing Apple with your post.  This is a user forum and we are all users just like you.

  • Hey Apple when are you going to fix the problems with IOS 8.3??

    Hey Apple when are you going to fix the problems with IOS 8.3??
    Message is working weird.
    I don't have internet service when I'm away from my WiFi, because my phone won't use LTE now.
    Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
    If there's a fix coming when will we see it?
    (I'm using iPhone6 plus)
    I've tried everything else to fix the problems I'm having. Soft restart. Hard restart. Used your chat line. Called Verizon. Reset network settings.... Help!!!!!
    I've posted on the Apple Communities about all this and I've sent in a couple of bug reports.
    I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!

    I have a Verizon iPhone 6 and am having none of those problems.
    SueMac wrote:
    Should I wait for a IOS 8.3.1 update or reset my phone to factory and start over?
    Didn't they already have you do that? If you haven't, yes, you should restore your phone as new and test.
    I live up in the mountains and MUST be able to access my Verizon LTE for information if there is a fire! I'm in California!
    If you are in a situation where you may need emergency information, organizations such as the Red Cross recommend things like this:
    http://www.amazon.com/Epica-Emergency-Digital-Flashlight-Certified/dp/B00CZDT30S /ref=sr_1_1?ie=UTF8&qid=1429463666&sr=8-…

  • I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

    I can not install xp through boot camp, the team just bought yesterday, is a macbook pro 13 when my old computer did it without problem with the same install disc

    There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410.

  • Problem with IDoc scenario - IDocs do not aarive to XI

    Hi guys!
    I have a problem with IDoc->XI->File scenario. Colleagues send IDocs from R/3 and they are not in the XI. In R/3 they look like if they were correctly sent, however, I can not see them in sxmb monitor. BUT, when they send them again explicitly from R/3 (t-code WE19), they arrive...
    REALLY strange...
    Any suggestions?
    IDX2 metadata loaded.. I think, all needed settings are done.
    Question - do I need to set up LS in XI ABAP part?
    Thanx, Olian!
    P.

    Hi Olian ,
    just check if u have followed all the following steps
    SAP XI
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (IDX1)
    a) Select create new button
    b) Enter the port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Load Meta Data for IDOC (IDX2) a) Create new
    b) IDOC Message Type
    c) Enter port created in IDX1.
    SAP R/3
    1) RFC Destination (SM59)
    a) Choose create.
    b) Specify the name of the RFC destination
    c) Select connection type as 3 and save
    d) In the technical settings tab enter the details SAP SID/URL and system number#.
    e) Enter the Gateway host as same details above SID/URL.
    f) Gateway service is 3300+system number#.
    g) In the Logon /Security tab, enter the client user & Password details of Destination system.
    h) Test the connection and remote logon.
    2) Create Port (We21)
    a) First Select Transactional RFC and then click create button
    b) Enter the destination port name as SAP+SID (The starting char should be SAP)
    c) Enter the destination client.
    d) Enter the RFC Destination created in SAP R/3 towards other system.
    e) Save
    3) Create Partner Profile (WE20)
    a) Create New
    b) Create the Partner no. name as same the logical system name of the destination system.
    c) Select Partner type LS
    d) Enter details for Type: US/USER, Agent, and Lang.
    e) Click on the + button to select the message type.
    f) Select Partner no. and LS which ever create above.
    g) Select Message type
    h) Select Process code related to the Message type.
    I) save.
    In SLD – System Landscape Directory
    TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
    Ts for Third Party (Logical system):-
    BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
    BS for Third Party (Logical system):-Enter the XI logical system name.
    In Transaction SALE
    Define and Assign the logical system name
    Regards,
    AshwinM

  • Problem with idoc DEBMAS

    Hi everybody.
    We have a problem with idoc DEBMAS.
    This idoc is sent from R3 to PI throw change pointers then the idoc is field only with the data modified in the master custumer.
    We need the information fill it in the segment /IDOC/E1KNA1M/E1KNVVM to determine the receiver determination but this segment is not always sent.
    What can be done in R3 to send always this segment.
    We dont want to sent the whole data but always this segment.
    Any idea???
    Thanks a lot!!!!!

    Hi,
    As E1KNVVM segement is not mandatory, when you are triggering IDoc based on change poitner data might not populted in the E1KNVVM segment until some sales data is changed.
    if you need that segement always just copy the Idoc type and make it mandaotry field.
    otherwise yoy can populate some fields like STDVRS with the reruried constant and can use in your receiver determination.
    Regards,
    Suresh

  • Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

    Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

    This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
    See:
    * [[Troubleshooting extensions and themes]]

  • Activate source system

    In RSA1 ->Source System. I right-click the R/3 source system and select Activate.
    After a while (like 1 min), I hit error message saying the "Result of the destination check: Timeout".
    Seem like the RFC timeout, how/where we can set this Time Out? Normally how long we set for this Time Out?

    Hi,
    Check if this thread helps you
    Source system connection
    RFC connection problem
    Error while source system creation/Source system transport

  • Not able to activate source system meta data

    Hello,
    For BW 3.5 The connection is working fine between source system and metadata is getting replicated successfully but in inactive mode.
    While activating I get following error.
    Incorrect IDoc type éâÄÃðôð@@@@@@@@@@@@@@@@@@@@@@@ in the ALE definition of the source system     RSAR     373
    Not sure what is wrong I have checked IDoc settings in both the systems they exists and the table RSBASIDOC has all the correct entries.
    Thanks and Regards,
    Milan

    Hi,
    Re-activate the source system in BW. That will recreate all the ALE settings. Make sure that the source system is open for changes and you use a user ID and password with appropriate auths for maintaining ALE settings.
    after that
    Try the restore option. Run check after that.
    Regards,
    San!

  • Change Default Background User In BW When Creating New Source System

    Hi all,
    I would like to create a new Source System in RSA1.
    In Source Systems > SAP > Create > Connection of source system to BW
    the Default background user in BW is u201CALEREMOTEu201D.
    How do I change this to another user?

    Just want to say thank you. I could fix a problem with your information.
    I was searching to change the background user from ALEREMOTE to BWREMOTE as all our process chains were running on ALEREMOTE.

  • Error when creating SAP source-system in RSA1

    hi,
    we have a new bi-installation. the bi-system is running in the SAME system as our erp 2005-system is running.
    the bi-client is 700, our source-system (FI/CO) client is 101. I want to create a source-system in RSA1. at the end i get the following error message:
    <b>Name D01MAND700 of client 700 is not the same as the name D01MAND101 of the Warehouse
    Message no. R3225
    Diagnosis
    In order to guarantee error-free communication between the source system and the SAP Business Information Warehouse, the logical system names must be known to both.
    The system has established that the selected source system name D01MAND101 in the SAP Business Information Warehouse is not the same as the logical system name D01MAND700.
    System Response
    Processing has been terminated and all changes undone.
    Procedure
    Create the source system under the name D01MAND700 in the SAP Business Information Warehouse or change the logical system name for client 700 to D01MAND101 in the ALE customizing screen of the source system.
    Note that the logical system name for client 700 may already be being used for other ALE scenarios. If this is the case you are not able to change the name.</b>
    i don't understand this error ? is it because the BI-system and the erp-system is the SAME system ?
    reg, Martin

    mr. kapadia,
    there is one entry in table rsbasidoc, and it looks like that:
    SLOGSYS     D01MAND700                            
    RLOGSYS     D01MAND700                                                                               
    OBJSTAT     ACT                                   
    BIDOCTYP    ZSCA017                               
    TSIDOC3X    0                                     
    TSPREFIX    CA                                    
    SRCTYPE     M                                     
    SAPREL      700                                   
    TSTPNM      D78358                                
    TIMESTMP    20.070.622.093.042                    
    SBWBCRL     700                                   
    RBWBCRL     700                                   
    looks strange, right ? what should i do ? delete this entry ? how can i do this, it is a customizing table, i cant delete it via SE16 ?!?
    reg, Martin

Maybe you are looking for