When i add an effect and export movie a black flash happens when i play back the movie

when the movie plays and the effect happens just before it happens it flashes black and then when the effect finishes it flashes black again, when i play it in preview in final cut 7 it doesnt happen

tell us what your clip settings and sequence settings are, in particular codec and frame rate.. And what effects are you applyin?

Similar Messages

When I move audio from itunes it won't play in the movie. How do I fix that ?

When I move a song from iTunes into a movie, it won't play when I play the movie. The movie file might be too big.
How do I fix that?

Hi
To get my Audio working I do
• only use .aiff 44.1kHz or 48kHz
• .mp3, .wma etc - all I convert to .aiff first
• from iTune - I do - Collect needed audio into a new PlayList - Then I burn this as an Audio-CD (not .mp3 - only .aiff) - then I use the files from this Audio-CD in my movie projects
And by doing like this - I have very few Audio problems.
Yours Bengt W

Green Flashes on Preview screen and final produc when i add certain effects

When i add an effect, such as speed up a video clip, when it is rendered i get green flashes when i preview it and when it is fully rendered. Can anyone explain this, as it makes for very poor viewing.
thanks

Download MPEGstreamclip (I gave you the link in my previous post), it is free.
Then you'll need to export the clips as QT movie > ProRes or DV.
Read this useful tutorial:
http://discussions.apple.com/thread.jspa?threadID=2070861&tstart=0
Instructions apply to your case (dealing with h.264) too.

Error message when importing data using Import and export wizard

Getting below error message when importing data using IMPORT and EXPORT WIZARD
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
<dir>
<dir>
Messages
Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'.
Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.".
(SQL Server Import and Export Wizard)
Error 0xc0209029: Data Flow Task 1: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "Destination - Buyer_.Inputs[Destination Input]" failed because error code 0xC020907B occurred, and the error row disposition on "Destination
- Buyer_First_Qtr.Inputs[Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Error 0xc0047022: Data Flow Task 1: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Destination - Buyer" (28) failed with error code 0xC0209029 while processing input "Destination Input" (41). The
identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information
about the failure.
(SQL Server Import and Export Wizard)
Error 0xc02020c4: Data Flow Task 1: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
(SQL Server Import and Export Wizard)
</dir>
</dir>
Error 0xc0047038: Data Flow Task 1: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on Source - Buyer_First_Qtr returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
(SQL Server Import and Export Wizard)
Smash126

Hi Smash126,
Based on the error message” Could not allocate a new page for database REPORTING' because of insufficient disk space in filegroup 'PRIMARY'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting
autogrowth on for existing files in the filegroup”, we can know that the issue is caused by the there is no sufficient disk space in filegroup 'PRIMARY' for the ‘REPORTING’ database.
To fix this issue, we can add additional files to the filegroup by add a new file to the PRIMARY filegroup on Files page, or setting Autogrowth on for existing files in the filegroup to increase the necessary space.
The following document about Add Data or Log Files to a Database is for your reference:
http://msdn.microsoft.com/en-us/library/ms189253.aspx
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I have several folders setup in my Safari. However, when I try to add a website to them, it never appears. When I add a folder and add a website to it, the website appears. Help?

I have several folders setup in my Safari. However, when I try to add a website to them, it never appears. When I add a folder and add a website to it, the website appears. Help?

I thank you for the response. Apple does some assinine things sometimes and this is one of them. Ask the planet the difference between a movie and a home video and with the exception of Apple, you'd get 100% consenus on the what difference is. A home video is something that I shoot, like my kids birthday party. A movie is something I urchased either via download or a DVD that I ripped. Unbelievable! The fact that Apple has chosen not to distinguish based upon which folder I tell it is Movies and which folder is Home Videos is really hard to fathom - sounds like something Windows would do. I find it funny that in my iTunes movies sub-section of the movies section, the movie icons have a cloud icon in upper right corner to distinguish it as bought from Apple iTunes versus no cloud icon for movies that I have ripped - so the distintion was already made and clearly visible. Now - everything just defaults to "home videos" if I try to import a new ripped DVD - why even bother to have this distinction on the iTunes bar? WOW!
As for your direction, I do not understand what you are telling me - what Media Kind and what Options tab are you referring to? I see no Options tab in iTunes. Right licking on the movie icon does not yield media kind or options as well. Gping to the source file does not yield these options either.
Thanks again for your help.
Clay

Firefox 3.6.8 crashes when accessing Add-on Manager and Google Toolbar (v 7.1.20100723W) is enabled

Well, as I said, Firefox 3.6.8 crashes when accessing Add-on Manager and Google Toolbar (v 7.1.20100723W) is enabled. This is on a 2010 white unibody macbook. I have a google toolbar, and all of a sudden, it keeps saying that it can't communicate with the toolbar. Now, I can't even uninstall it because whenever I go to the add on manager, it says there's an 'unresponsive script'. Could anyone help me? Thanks.

I fixed it by running in Safe Mode, and uninstalling Personas. Thanks again!

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done?

How can I import a movie into iMovie 09 from a hard drive? The movie will open and play in idvd but breaks into separate files that can't be downloaded when I try to import. Can it be done? I am trying to create a disc of player highlights for a collegiate coach, and I am using movie files downloaded to my hard drive from a DVD created on a PC.

No unfortunately it won't open in quicktime either. It does the same thing that Imovie does, separates it into two file folders audio and video, and if i select video it opens to reveal 8 files that cannot be selected. VIDEO_TS.BUP, VIDEO_TS.IFO, VIDEO_TS.VOB,VTS_01_0.BUP, VTS_01_0.IFO, VTS_01_1.VOB, VTS_01_2.VB, VTS_01_3.VOB. All of which cannot be opened or selected.
Opening it in Idvd and folllowing your suggestion works and I get a format code of NTSC. Is that the same? Thank you for your time and response.
CaCanuck

When I add a watermark and flatten the transparency, it duplicates the file within the file.

When I add a watermark and flatten the transparency, it duplicates the file within the file. (a 105 pg file becomes 210pgs)

After doing so, use the Save As command to save the file under a new name.
This should optimize it and reduce the file's size, sometimes dramatically.

I recently had to set my laptop back to factory settings, thus had to reinstall Itunes. I connected my Ipod to the lap top my songs went back to my Itunes but when I add new songs and try to sync my Ipod, the new songs won't appear on my Ipod. Help me!!

I recently had to set my laptop back to factory settings, thus had to reinstall Itunes. I connected my Ipod to the lap top my songs went back to my Itunes but when I add new songs and try to sync my Ipod, the new songs won't appear on my Ipod. Is there someone out there that can help me out? I would appreciate it!

Hi NYYJMM,
Thanks for visiting Apple Support Communities.
You may want to reset your iPod nano and then sync again. If the issue persists, restore your iPod and try again. See these articles for the steps:
How to reset iPod
http://support.apple.com/kb/ht1320
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Best Regards,
Jeremy

In Premiere Pro I have no shape tools when I add Mosaic effect?

I want to make an oval mask over a video of my son playing basketball so he is easily seen during basketball game video.
I saw a video about the new tracking using Mosaic effect but when I add that effect I do not get the shape tools....I did see where it says it does not work with Warp Stabilizer but I never added that to the video?
How do I turn off Warp stabilizer or where do I find my shape tools?
I'm using Windows 8
Current Premiere Pro CC
Thank you for your help!

all of these will be in the effect controls window for the selected clip. if it shows no Warp Stabilizer effect listed, it shouldn't be active. you need to add an effect such as RGB curves or fast color corrector if you want to change brightness/contrast with the mask. this mask tool was a recent addition to the adobe software, so if you have an older version of premiere you may not have these.

When I design with Muse and export as HTML Dreamweaver doesn't attach the style sheets. Any answers?

When I design with Muse and export as HTML Dreamweaver doesn't attach the style sheets when I open the files with Dreamweaver. Essentially when I design with Muse the files don't render the same with Dreamweaver. Is this a bug? Any work arounds?

Then you will have to install a local server and use live view. It's not that DW isn't rendering it or isn't attaching it, it's that Muse decided to use server-side processing to include it which is ok for a CMS practice when you are combining stylesheets for better caching, but it really isn't ideal for a single style sheet. This is a shortcoming of Muse and one of the reasons many professionals don't back the product at the moment. That and you can't actually buy Muse, so unless you are on a subscription you don't have it. It's trying to fill a void for those who don't want to invest in the professional design tools like Fireworks or Photoshop or Dreamweaver, but want a cross between them to make designs. If you have invested in the subscription though and want a better way to make layouts I highly recommend coding it yourself and using Fireworks or Photoshop to do the layout for you. There is an excellent tutorial on the devnet (3 parts) to show you how its done ( http://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html ). Once you start using Fireworks or Photoshop you will realize just how limited Muse is in design.

When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

When I try to include a white and black photo in a iMovie the result is a black totaly black picture which does not show in the movie. Why? Can it be fixed?

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Other than that, what version of iPhoto do you have? Assuming 09 or later try
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD
P.S. Please don't type in block capitals. They are harder to read and on the forum it looks like you're having a tantrum

Add frame hold and export frame

hi
i'm working on HD broadcast cartoon animation.
'add frame hold' and 'export frame' are not creating a 2 field, proper frame hold for me - yes i can tweak the field options using 'always deinterlace' or 'flicker removal' but this isnt a fix or a true result of a 'frame freeze'.
is this a bug or am i missing something?
thanks
Joe

Is your timeline interlaced?

I downloaded a movie. It isn't in video app nor iTunes. I tried the settings general restrictions and it isn't restricted. I am positive I rented the movie because when I go back to iTunes and press rent it says that it has already been rented.

I downloaded a movie. It isn't in video app nor iTunes. I tried the settings>general>restrictions and it isn't restricted. I am positive I rented the movie because when I go back to iTunes and press rent it says that it has already been rented. How do I get to this movie?

Having the same problem. Watched 25 minutes of a rental and it stopped with the message"unable to load video"
Using current version IPad mini.
Ios7 is HUGH PIECE OF CRAP!!!!

How do I watch a movie downloaded to my MacBook on my ATV?     The movie works fine on the computer but I just get a checkerboard pattern on the TV screen with audio but no video. Apple support is useless and suggested that I reload the software...

Just downloaded a HD movie to my computer (brand new MacBook Pro, all software up to date) and can't watch it on my Apple TV (brand new last year, all software upto date). Using Airplay mirroring works fine in general but when I press play on the movie I lose the picture and get only a checkerboard pattern and sound. Another MacBook we have gives a black screen with no sound. Apple assistance is completely useless. They suggested that I download the most recent software (all upto date), reload the movie (done and no help) or read the FAQs (no help, although this board suggests that there is a fundamental compatibility issue with mirroring of HD content...!)   That's what the ATV is for!   The new MacBook uses a different connector and I can't plug it directly into the monitor input on my TV with the connector I had from the old computer.   I ordered a new connector for fifty bucks and they stupidly sent it UPS with a signature required for delivery since it is such a high value item so now I have a hassle to receive it. In any case plugging in a wire from across the room isn't a solution. Is there any way to make all of this supposedly integrated hardware and software work or has Apple completely lost their way and turned into a Microsoft clone?   Hopefully some of their market mavens will read this and steer the ship back on course. In the meantime any help you may provide would be much appreciated.

The movie is from iTunes.   You would think that a download from iTunes to a MacBook could be watched on an HDTV using Apple TV without any headaches bit this does not appear to be the case.

When i add an effect and export movie a black flash happens when i play back the movie

Similar Messages

Maybe you are looking for