When i adjust music volume, wadsapp volume changes too.
I just changed my phone to iPhone 5s from iPhone 4s. I've been listening to music and obviously i wont be listening to music with 100% volume, then i realized when people wadsapp me, the tone was very soft. I played around a little and realized that the volume from Music affected my wadsapp's tone volume too!
When i was using my iPhone 4s changing my music volume doesnt seem to affect my wadsapp tone tho. I've also disabled change with button, so SMS volume wasn't affected, only wadsapp.
Anyone knows if there's any way i can solve this? Else i'd have to keep adjusting the volume after listening to music -_-
Event Video Guy wrote:
you are a life saver
Event Guy,
Glad it helped. (I also do not like iTunes to mess with the filenames.)
Enjoy the music!
Ed
Similar Messages
-
i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it
i have an iphone4 and when i adjust the ringer volume the bell display says headphone how do i change it back to say ring tone on the bell display when adjusting ringer volume, i have never had headphones plugged into it
-
i just changed my iphone 4s and received another one as i was still under my one year warranty, and now when i play music via headphones there is a volume limit on it, i have tried to turn it off but it wont turn off someone please help>>>
Hi kingminjing,
Have you checked your Control Panel to make sure you don't have the flashlight turned on?
Swipe up from the bottom of the screen and make sure the flashlight icon (bottom left-hand corner) is not white. If it is, tap on it to turn it off.
Cheers,
GB -
Controlling the "beep" when you adjust volume
Hello.
In using my computer with Final Cut Pro I often have to adjust the system's volume - by that I mean putting my mouse over the little "speaker" icon in the top right corner. When I have to try and listen to something faint in a clip that means sliding the "slidder" much of the way up. Problem is when I do I get an ear-jolting "BEEP!"
Is there anyway to control or elimiate these "beep" sounds that occur when adjurting voume in this way? I can see how to change the nature and volume of the other sounds the computer creates but not this one.
Thanks.
JohnTrying to see what is possibly corrupted- what about unchecking the other one? I guess you tried that too.
Also, when operating properly and both are checked (all sounds on) and the volume is turned up enough, you can temporarily mute the feedback sound in changing volume by holding down the Shift key. Does that work OK? This is when you use the keyboard volume controls, not the mouse. -
Laptop Freezing, when Listening Music with full volume (Very Loud)
1. Product Name and Number
Product Name: HP Pavilion g6 Notebook Pc
Product Number: LQ283EA#ABE
2. Operating System installed
Windows 7 64-bit
3. Error message (if any)
None
4. Any changes made to your system before the issue occurred
None
5. Problem Description:
As I sad Laptop Freezing, when Listening Music with full volume (Very Loud),
exactly : When I start Playing music after some time , the problem occurs. It does not responds anymore and
very loud and strange voice comes from laptop speakers ,I have to turn off laptop with long power button press;
solution : the only one solution i found is to listen to music only with low volume funny is not it ?
It seem´s to be an hdd problem , may loud music vibration couses Hdd To Freez , hdd indicator bulb is nod lighting during freez , I am Programmer , so I Tested HDD for errors , thre is None ....
Anyone has this kindo of problem or Knows any solution ? (May I am wrong , and this is not HDD)
Thanks , allCan't answer the query, since I don't use thumb drives and my volume's very responsive. That said, please don't post using ALL CAPS. That's considered shouting and is very disconcerting.
-
Phone turns off by itself/when i adjust the volume is switches to headphone
two issues here
first is that my phone just turns off on its own. happens 1-2 times a month. anyone else having this happen to them?
second is when i adjust the volume up/down the phone switches to headphones when no headphones are plugged in.perform SMC reset
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
If the same contact Apple for appt. for full in shop diagnostic and possible repair. -
Hi, basically i have no sound at all on my Iphone, it doent notify me when i get a text, when someone rings, when i play music or watch videos, the volume slider that is usually present while watching videos or listening to music is no longer there at all, ive turned my phone on and off a couple of times now ive put headphones in and out to see if i had a sticky jack but still no luck Someone help??
And to clarify, these are all iTunes movie and music downloads, so there should not be a compatability issue. And no, the iPod did not come damaged from Apple, it was a hand-me-down from a friend who busted the internal speaker. But it's never done anything like this before. It just had crappy sound. And yes, the timing of the movies and music having issues is the same as the speaker dying. And no, this has NOTHING To do with music videos. I don't have any on any of our devices.
-
Help Please! My volume has disappeared when I play music on my iPhone 4s (since I updated to iOS6). Help please!?
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
Have you tried ALL the troubleshooting steps? If you have and you're still having problems, then you'll need to bring your phone into Apple for evaluation and possible exchange. -
I Have An Iphone 4s And When I Listen To Music With My HeadPhones I Cant Lower The Volmume of The Music Beacuse Then It Will Have No Sound I Can Only Listen To The Music With The Volume Loud I Need Help What Can I Do ?
Hi Yendy14,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
- Judy -
when i play music on my mini no sound comes out, so i push the volume button thinking it was turned down and it keeps saying headphones like headphones are connected and they are not even plugged in>
Hi Try a, reboot, press & hold power button & menu, button, hold both down until you see Apple Logo. Before you do Reboot, Sign out, of itunes on ipad then sign, back in this may help. Cheers Brian
-
My iPhone's volume is not working and showing anymore, when i press the buttons it wont show, and when i play music it wont show and i can't hear anything! Please help!
Your volume limit may be restricted.
Check Settings > General > Restrictions -
I have the volume control symbol in the enter of my iPad all of the time. My music will not play and when I try to increase the volume manually, it statics and will not maintain a volume level. Thanks
Try resetting the iPad by holding down on the sleep and home buttons until the Apple Logo appears on the screen. Ignore the red slider if it shows up. You will lose no data.
-
My ipod touch (4th generation) has no sound. I have turned it off and on.....I have the volume up in the "sounds" area. When I push the side volume button, there is no image that appears in the screen that shows that I am either raising or lowering the volume. Do I need to just rest the ipod touch as a new device? Or is there someting else I can try?
And, now when I do press the side volume buttons, the image appears but with the words' "sound effects." what does that mean?
-
Can anyone help me with the above question? I like to make up cd's of all time favorite songs, but the volume changes too much. Is there anything I can do in order to get even sound? Thanks.
That's what iTunes -> Preferences -> Playback -> Sound Check does - equalizes the volume across tracks to provide a more-even playback.
-
Volume Drop Problem (changes depending on how held)
The speaker volume on my iPhone changes depending on how it's being held. I surely hope this isn't considered a "feature". Held at a diagonal angle tilted backward, the volume drops considerably. It seems to play normal only when fully flat, or vertical.
Anyone else have this problem also? I'm considering exchanging it for another.Don't you think it might just be a little useful to know what normally happens? I mean, you do realize that some phones sound silent when you tilt them a mm, while other phones sound almost the same no matter where you hold them. You do get that the difference in volume for the iPhone speakerphone when placed on a solid surface is much more dramatic than the changes in volume most other phones have due to placement, thus it's not something everybody thinks of right away.
Nobody tried to tell you that the sound waves were effected by gravity and the phone would be louder if you held it over your head right?
Read the first post again and think about it; 'speaker' refers to any sound emitting device like the 'headset', 'earpiece', or 'speakerphone speaker'...which you might even call the 'speaker speaker' or just 'speaker', regardless of how you define the parts; other people toss around the terms as if they are interchangeable. The post just says speaker.
If you are so bright then why are you asking a question at all? You know that if you move your body and the phone at the same time the volume shouldn't change. I mean..sure gravity does make the soundwaves drop quicker and all that so when you walk up an angled driveway the phone needs to adjust the volume, but that's only a little bit...not 'considerably' right?
Let's think for a second (or less for some of us). First, 'I was concerned some engineer mightve mistakenly thought of this as some cockamami "feature"'. Know what? It's a good idea. I wouldn't half mind a phone that could adjust the volume when I moved it to or from my ear or body. Seamlessly changing from the EARPIECE to the SPEAKER would be a great thing too. Things like switching from the bluetooth HEADSET to the SPEAKER are nice touches. I think you have an advanced model or a special feature.
It's also a little difficult for people to know how much your phone changes in volume when they can't hear it. It's not like there's a recording or some empirical data like 'hey, when I tilt my phone at a 45 degree angle it drops 20 decibels'.
As to 'reflected acoustics?!?!', I think the post starts with "speaker volume" and continues to 'when fully flat, or vertical'. Fully flat sounds like your phone is sitting on a table, shelf, or the floor and since I don't put my phone on a block then lay down on the floor with my ear above it to make a call I think the description sounds more like the speakerphone portion than the ear 'speaker'. Stating what the SPEAKER should do when normally performing in answer to a question should be considered informative and useful because : If you knew what the speaker was supposed to do you would not have asked.
Yeah, you never know who is using an iPhone or posting in the forums, but it doesn't take very long to read through the posts and find the information you want when you post a clear question in the first place.
I don't consider my phone a derogatory TLA, but if that's what you think of the product then I hope you enjoy your old phone.
Don't let the bass fall on your foot on the way out.
Maybe you are looking for
-
How can I delete an iTunes account from my iPhone so it's no longer associated with my device?
-
Hi Guys, I have created a DSO with just MATNR and one of its bespoke attributes(Catalogue number) and extracted from 0Mat_Sales_Attr.(MVKE). When I load the 0Mat_Sales_Attr in DEV & QA, the data loads OK. Now in Regression, the load only adds 1 recor
-
T530 multiple display in dock, single without dock
Hi I have a problem with dispplay settings on my T530 with nvidia 5400m. If i Boot the computer in the docking with lid closed I get two displays (fine!). If I boot the computer with lid open in dock i get all black screens (three) but i can move the
-
Hi, I have a varray(3) of number and I would like a member procedure or function to return the 3 numbers as columns of a view definition. So, the object table looks something like CREATE TYPE COORDINATES_L AS VARRAY(3) OF NUMBER; CREATE TYPE THINGY A
-
Hey everyone I need to know if it's possible to install Excel program into my Palm V? and if it is possible that how would I go about doing that? Any information will be greatly appreciated! Thank You. Post relates to: Palm V