When I am activing the ODS object I getting an error as

STDO : Log could not be written on output device T.
and in Msg Txt:
                The creation of export Datasource is failed
     RFC connection to source system BW2CLNT800 is damaged ==> no Metadata upload
     RFC connection to source system BW2CLNT800 is damaged ==> no Metadata upload
                Error when creating the export DataSource and dependent Objects
These r the msg I am getting.
Pls provide me a soultions

Hi,
Refer the below links:
Re: ODS activation failed
Re: ods activation error
/message/3075199#3075199 [original link is broken]
With rgds,
Anil Kumar Sharma .P

Similar Messages

While activating the ODS i'm getting these errrors

Hi All,
While activating the ODS i'm getting these errrors,
1) The creation of the Export Datasource failed
2) RFC Connection to the source system is damaged --- no metadata upload
3) Error when activating ODS object
What would be the reasons.............?
Plz Reply back me on [email protected]
Regards,
Kiran

Hi,
Im finding a similar issue but with task SDE_ORA_GLJournals,
the code is :
AND DECODE(, 'Y', GL.LEDGER_ID, 1) IN ()
AND DECODE(, 'Y', GL.LEDGER_CATEGORY_CODE, 'NONE') IN ()]
the parameters are also fine in the parameters file.
Has anyone found a solution or an explanation for this?
Thanks a lot, regards
Nestor

When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive. Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
OT

I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks

I am using ITUNES 11 on Win 7 64 bit. I can download podcasts to my IPOD touch just fine but when I click on the ITUNES store I get an error message that stays "ITUNES has stopped working". How do I trouble shoot or fix this? Thanks

Try gn_id's suggestion from the following post:
Re: iTunes 11 crashes when opening the store - no error message

When i am posting the Outbound delivery,here getting Runtime error

Hello
         When i am posting the Outbound delivery,here getting Runtime error
This is error analysis report
Error analysis
    Short text of error message:
    No RFC destination is defined for SAP Global Trade Services
    Long text of error message:
    Technical information about the message:
    Message class....... "/SAPSLL/PLUGINR3"
    Number.............. 002
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Please give me solution for this

HI,
Probable some missing customising for SAP Global Trade Services - Plug-In.
Check with your functional consultant if the configuration is correct.
Check in SPRO.
Sales and Distribution>Foreign Trade/Customs>SAP Global Trade Services - Plug-In
Regards,
Ankur Parab

When i click on the Firefox icon I get an error message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. What is it? and how do i fix it? in English

When i click on the icon to open Firefox an error message box appears with the following message, C:\Program Files\Java\jre6\lib\deploy\jqs\ff\..\..\..\..\bin\jqsnotify\.exe cannot be found. It then advises me to use the Search function, but the search function says it is unavailable.
What is it? and how do I fix it? in English

See:
http://www.java.com/en/download/help/quickstarter.xml - What is Java Quick Starter (JQS)? What is the benefit of running JQS? - 6.0

DBIF_RSQL_INVALID_RSQL Error while activating the ODS Object

Hello BW Friends,
We have used the Extractor 2LIS_11_VAHDR and enhanced and coded the user exit to extract the data to the required field. Extractor is working fine and able to get the records but when we tried to schedule a data load in BW the request was shown green in the ODS and when saw it in monitor it is still yellow and zero in PSA and the processing hasn't completed. When i tried to activate it manually there is a short dump generated with this error, DBIF_RSQL_INVALID_RSQL. If any one of you has encountered same problem please let us know. Appreciate your prompt response on this.
Regards,
Rajesh

Raj,
I misunderstood your question.... check whether source system job is processing or not? what about any blocked TRFC'sin SM58.
try to find root cause... ODS activation is not a problem... load is not finished you tried to acivate the request still in the process Yellow.
try to check in Monitor details tab page messages...
All the best.
Regards,
Nagesh Ganisetti.
Message was edited by: Nagesh Ganisetti
Message was edited by: Nagesh Ganisetti

I have an iPhone 4S I have done the recent update 6.1 and now my App Store is not working when I go into the feature tab I get an error " too many HTTP redirects" how do I fix this ? The other tabs are working and it is working on my iPad also

I am having a problem getting into the App Store on my iPhone since the recent update, I have a 4s and it appears the feature tab is not working. When I try to go into the feature tab in the App Store I get a message "too many HTTP redirects" ?... Does anyone now hoe to fix this issue, the other tabs are working okay and everything is working on my iPad ?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

My apple password and id works on everything except when i go through the control panel, i get server error

I get server error when I try and open I cloud on the control panel. My id and password work on everything else. Anyone know how to fix this. Vista 8.

What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try ethernet

I installed Lion Server and when I click on the Profile Manager I get an error and nothing shows - I can't figure out how to re install Lion Server to fix this - any ideas

I installed Lion Server on my Mac Pro. Everything looked to be working until I checked Profile Manager and I get an error message "Error Reading Settings" Not sure how to fix it. Tried to download Server agian but can't.

Look at /usr/lib/libpq library. I have had the same problem. There were following files:
-rwxr-xr-x 1 root wheel 163680 30 jul 21:17 /usr/lib/libpq.5.4.dylib
lrwxr-xr-x 1 root wheel 15 30 jul 21:20 /usr/lib/libpq.dylib -> libpq.5.4.dylib
Result for command sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB .sh was:
Password:
devicemgr:state = "STOPPED"
postgres:state = "RUNNING"
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
Couldn't drop device_management : #<RuntimeError: Please install the postgresql adapter: `gem install activerecord-postgresql-adapter` (dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backen d/vendor/gems/pg-0.9.0/lib/pg_ext.bundle, 9): Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle
Reason: image not found - /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle)>
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
Please install the postgresql adapter: `gem install activerecord-postgresql-adapter` (dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backen d/vendor/gems/pg-0.9.0/lib/pg_ext.bundle, 9): Library not loaded: /usr/lib/libpq.5.dylib
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle
Reason: image not found - /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor /gems/pg-0.9.0/lib/pg_ext.bundle)
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/activerecord/lib/active_record/connection_adapters/abstract/connection_spe cification.rb:76:in `establish_connection'
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/railties/lib/tasks/databases.rake:69:in `create_database'
/Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/vendor/ rails/railties/lib/tasks/databases.rake:31
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 636:in `call'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 636:in `execute'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 631:in `each'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 631:in `execute'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 597:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor. rb:242:in `synchronize'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 590:in `invoke_with_call_chain'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 583:in `invoke'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2051:in `invoke_task'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `each'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2029:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2068:in `standard_exception_handling'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2023:in `top_level'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2001:in `run'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 2068:in `standard_exception_handling'
/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/rake.rb: 1998:in `run'
/usr/bin/rake:31
Couldn't create database for {"adapter"=>"postgresql", "username"=>"_devicemgr", "encoding"=>"UTF8", "pool"=>5, "database"=>"device_management"}
devicemgr:state = "STARTING"
There was missing symlink to right version of libpq dynamic library!
After I entered the following commands and now it works well for me:
$ cd /usr/lib
$ sudo ln -s libpq.5.4.dylib libpq.5.dylib
$ sudo /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend/wipeDB .sh
devicemgr:state = "STOPPED"
postgres:state = "RUNNING"
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
(in /Applications/Server.app/Contents/ServerRoot/usr/share/devicemgr/backend)
devicemgr:state = "RUNNING"
Milan

When I double-click the desktop icon I get an error message: XUL RUNNER error: Platform version '2.0.1' is not compatible with minVersion =5.0 maxVersion =5.0. I must right click the icon and choose 'RUN OUTSIDE THE SANDBOX' to open the browser.

This problem occurred shortly after updating to Firefox 5.0 I kept getting reminders to update to 5.0 When I finally decided to update, the first 4 or 5 attempts failed for one reason or another always with a different error message At some point after and extended shutdown of the computer 5.0 was initiated.

The updater wasn't able to update all the files and some were left as older versions.
You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Error Activating the ODS data

Hi Guys,
I am facing an error while activating the data in the ODS.
The data is loading perfectly fine but when activating the ODS data the following error is coming
Request REQU_3ZI9CZ369HR6SM49OL9ULRVKM, data package 000031 incorrect with status 5 in rsodsacstreq
System error occurred (RFC call)
No confirmation for request ODSR_3ZI9DUVOMM02L1I777X5YX9QU when activating the ODS object PA_ODS1
There is no PSA for InfoSource 8PA_OA001 and source system BWPCLNT641 ( The data laod is without PSA )
This is happening after we had a BWQ refresh .
I thought this has something to do with the BASIS guys but they say they checked everything.
Need Help

Hi Sidhu,
There were red requests in the ODS but I deleted them and tried activating the green requests , even when there are only 4 records it is not activating the data.
I checked the RESREQDONE table but I dont see these requests in there.
I checked the SM58 there I saw a lot of errors
ALEREMOTE RSAR_TRFC_DATA_RECEIVED BWQCLNT641 10/17/2005 18:50:48 ERROR REQU_3ZHNIS265F9F6HJQ8PY838046 PG# 21 In BW
one line in that is this . can u throw some thought on this. when I try to execute this LUW it says that function module RSAR_TRFC_DATA_RECEIVED doesnot exist or exception raised message. I got these yesterday but today I got only one and when I executed that LUW it gave me the same message but that error message is not showing now
Regards
Majeed

What is the ODS object settings?

What is the ODS object settings?

Use
When creating and changing an ODS object, you can make the following settings:
BEx Reporting
With the BEx Reporting indicator, you determine whether the ODS object is immediately available for BEx queries. If the indicator is not set, no SIDs are generated for the new characteristics when the data in the ODS object is activated. This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries. Turn the indicator off for all ODS objects that are only being used for further processing of data in other data targets or that are being used in InfoSets.
ODS Object Type
Select the ODS object type. You can choose between standard and transactional, whereby standard is pre-installed and transactional is only meant for special cases. You can switch the type as long as there is still no data in the ODS object.
See also Transactional ODS Objects.
Unique Data Records
With the Unique Data Records indicator, you determine whether only unique data records are to be updated to the ODS object. This means that you cannot load a data record into the ODS object the key combination for which already exists in the system u2013 otherwise a termination occurs. Only use this setting when you are sure that only unique data records are to be loaded into the ODS object (for example, single documents). A typical application of this is in the loading of mass data. It improves the load performance.
Note
You can also deselect this indicator again (even if data has already been loaded into the ODS object). This can be necessary if you want to re-post deleted data records using a repair request (see: Tab Page: Updating). In this case, you need to deselect the Unique Data Records indicator before posting the repair request, following which you can then reset the Unique Data Records indicator once more. The regeneration of metadata of the Export DataSource, which takes place when the ODS object is reactivated, has no effect on the existing data mart delta method.
Check Table for the InfoObject
Here the name of the InfoObject is displayed for which the ODS object is also the check table, if necessary. You can specify this when creating an InfoObject. See also Tab Page: Master Data/Texts in the InfoObject maintenance.
Automatically Setting Quality Status to OK
With this indicator, you can determine that the system automatically sets the quality status to OK after loading data into the ODS object. You should turn on this function. You should only deselect this indicator if you want to check the data after it has been loaded.
Automatically Activating the ODS Object Data
With this indicator, you can establish that the data that has Quality Status OK be transferred from the activation queue into the active data table, and that the change log is updated. Activation is carried out by a new job that is started after loading into an ODS object is complete. If the activation process terminates, there can be no automatic update.
Automatically Updating Data from the ODS Object
With this indicator, you can establish that the ODS object data be automatically updated. Once it has been activated, the data is updated in the data targets. An init. update is carried out automatically with the first update. If the activation process terminates, there can be no automatic update. The update is carried out by a new job that is started once activation is complete.
Note
Only activate automatic activation and updating if you can ensure that these processes do not overlap.
If you use process chains to guarantee serial processing of the process, these settings are not supported for the object (with the exception of setting the quality status). Then you have to include the automatic processes as process types in the process chain.
Also refer to the example for Including ODS Objects in Process Chains.

Error while activating the ods ( prod.issue)

Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
Rakesh

Hi Rakesh
The error message
"Key value exists in duplicate (not allowed by the ODS object type)" in the snap you sent, means you set the ODS for unique records. Thats why its not allowing a second with the same value, which is already in the ODS.
Please check your ODS settings, if 'Unique Data Records' is checked or not.
Sorry for my late response!
Regards
GSK

Error while activating the ODS (high priority ticket)

Hi BW guru's
I am facing major issue while activating the ods i am getting this below error.
Request REQU.....,data package 000002incorrect with status 5
Request REQU.....,data package 000001 incorrect with status 5.
If any1 has come across this issue pls help me out .
I will reward the points surely.
Cheers,
Rakesh

Hi,
ODS activation error
Re: ODS Activation Failed with Status 5
ODS activation is failing with incorrect with status 5 erro
Re: Error Activating the ODS data
ODS Activation error
Regards,
San!

When I am activing the ODS object I getting an error as

Similar Messages

Maybe you are looking for