When I am on Safari, the page randomly goes back to the previous page I was on. This is really frustrating when I am writing something online because it does not save my work. Fix for this?
When I am on Safari, the page randomly goes back to the previous page I was on. This is really frustrating when I am writing something online because it does not save my work. Fix for this?
(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.
Similar Messages
-
/dev/sequencer does not exist --- Found a fix for this !!!!!
Hi guys i used to be able to play midi files and load sf2 into my audigy 2 platinum card. But last week i upgraded my system which was a 2.4 kernel and since then i get /dev/sequencer no such device.
I bit the bullet and upgraded to the 2.6-scsi kernel.
Got my sound working under alsa but still if i use sfxload i get /dev/sequencer no such device.
Now i know its there in /dev/sequencer becuase i checked the links etc.
Also here is my lsmod output :
Module Size Used by
DAC960 76072 0
parport_pc 29124 1
pcspkr 4172 0
shpchp 100868 0
pci_hotplug 30788 1 shpchp
ehci_hcd 37256 0
ohci_hcd 23044 0
i2c_i801 9100 0
i2c_core 22784 1 i2c_i801
uhci_hcd 33808 0
emu10k1_gp 4096 0
gameport 17160 2 emu10k1_gp
hw_random 5908 0
appletalk 40276 2
ipx 32420 2
p8022 2816 1 ipx
psnap 4356 2 appletalk,ipx
llc 8212 2 p8022,psnap
nvidia 3713700 12
eth1394 21256 0
videodev 10368 0
ohci1394 36404 0
ieee1394 106200 2 eth1394,ohci1394
lp 13060 0
parport 38600 2 parport_pc,lp
snd_seq_oss 36352 0
snd_seq_midi_event 8448 1 snd_seq_oss
snd_seq 57488 4 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 55456 0
snd_mixer_oss 20480 1 snd_pcm_oss
snd_emu10k1 120324 3
snd_rawmidi 26784 1 snd_emu10k1
snd_seq_device 8972 4 snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
snd_ac97_codec 83960 1 snd_emu10k1
snd_pcm 97796 5 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
snd_timer 27012 3 snd_seq,snd_emu10k1,snd_pcm
snd_page_alloc 10244 2 snd_emu10k1,snd_pcm
snd_util_mem 4992 1 snd_emu10k1
snd_hwdep 9760 1 snd_emu10k1
snd 60388 15 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep
soundcore 10848 1 snd
3c59x 42792 0
mii 6272 1 3c59x
ide_scsi 18948 0
ide_floppy 20864 0
usb_storage 76992 0
usbcore 127740 5 ehci_hcd,ohci_hcd,uhci_hcd,usb_storage
rtc 14156 0
tsdev 8384 0
evdev 10240 0
Also i have tried reloading alsa to no avail.
I have audio just no sequencer audio using my sound fonts.
Even tried rebuilding awesfx.
HELP PLEASE...Just thought id post this fix to my problem in case someone else has a similar nightmare.
I was reading through the wiki when i saw the usb midi page . Now my keyboard is not usb but still it can't hurt i thought.
And guess what i got my sound fonts to load again and my midi keyboard working.
Carefully went through all the options i had entered in the terminal to find that it was "aconnect -i" that did the trick for me so i entered this in my rc.local and rebooted to see if my midi still worked.
Hey presto i've got sound fonts and midi everytime now .
Heres my lsmod output after aconnect -i ....
Module Size Used by
appletalk 40276 2
ipx 32420 2
p8022 2816 1 ipx
psnap 4356 2 appletalk,ipx
llc 8212 2 p8022,psnap
nvidia 3713700 12
snd_seq_midi 9632 0
snd_emu10k1_synth 8448 0
snd_emux_synth 39296 1 snd_emu10k1_synth
snd_seq_virmidi 8832 1 snd_emux_synth
snd_seq_midi_emul 8192 1 snd_emux_synth
eth1394 21256 0
videodev 10368 0
ohci1394 36404 0
ieee1394 106200 2 eth1394,ohci1394
lp 13060 0
parport 38600 1 lp
snd_seq_oss 36352 0
snd_seq_midi_event 8448 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss
snd_seq 57488 8 snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 55456 0
snd_mixer_oss 20480 1 snd_pcm_oss
snd_emu10k1 120324 4 snd_emu10k1_synth
snd_rawmidi 26784 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1
snd_seq_device 8972 7 snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi
snd_ac97_codec 83960 1 snd_emu10k1
snd_pcm 97796 5 snd_pcm_oss,snd_emu10k1,snd_ac97_codec
snd_timer 27012 3 snd_seq,snd_emu10k1,snd_pcm
snd_page_alloc 10244 2 snd_emu10k1,snd_pcm
snd_util_mem 4992 2 snd_emux_synth,snd_emu10k1
snd_hwdep 9760 2 snd_emux_synth,snd_emu10k1
snd 60388 17 snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer,snd_hwdep
soundcore 10848 1 snd
3c59x 42792 0
mii 6272 1 3c59x
ide_scsi 18948 0
ide_floppy 20864 0
usb_storage 76992 0
usbcore 127740 2 usb_storage
rtc 14156 0
tsdev 8384 0
evdev 10240 0
I hope this helps someone... -
i have problem that changes i make wont be saved it all goes back to the same date that i had this problem for EX: when i ever change my desktop photo and reopen the macbook it goes back to the same photo that i had before.
Might be corrupted preferences ..
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Preferences/com.apple.desktop.plist
Click Go then move the com.apple.desktop.plist file to the Trash.
Restart your Mac and try changing the desktop photo. -
When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
When I use my ipod in the car it goes back to the start of the track every time i start the car. why is this?
Only if you backed them up somewhere.
-
Having problems with facetime on the ipod. When i sign id and click next it goes back to the sign in screen. Any ideas ??
Have ou tried here:
iOS: Troubleshooting FaceTime
Also try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
Preventing the User from going back to the main page after logging out.
Hi all,
In my project I want to prevent the User from going back to the Main page, by clicking the back button of the browser, after the user has loggged out.I had invalidated the session so the user will not be able to do any operations, but he can vew the infos. I want to redirect to the login page if the user tries to go back using the back button after he has logged out.
I tried the same in this forum after loging out. Surprisingly it is the same. I can browse through all the operations i did even after logging out from here.
Is it not possible to do that in Servlets?Could somebody help?
Thanks,
Zach.Hi,
You can use a servlet filter to do this , as it can interceptany request to your application you can decide to allow user access or not to any page/servlet.
public class Test implements Filter{
public void destroy() {
public void doFilter(ServletRequest arg0, ServletResponse arg1, FilterChain arg2) throws IOException,
ServletException {
System.out.println("filter");
HttpServletRequest request = (HttpServletRequest) arg0;
if(!request.getRequestURI().contains("index")){ // set condition that will be checked to verify if the user is logged in
System.out.println("redirecting ... ");
RequestDispatcher d = arg0.getRequestDispatcher("/index.jsp");
d.forward(arg0, arg1);
arg2.doFilter(arg0, arg1);
public void init(FilterConfig arg0) throws ServletException {
}in you web.xml add :
<filter>
<filter-name>test</filter-name>
<filter-class>test.Test</filter-class>
</filter>
<filter-mapping>
<filter-name>test</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping> -
I am on a website that requires a client certificate to validate identity. When I select a certificate to use, it goes back to the list of certificates. I can't seem to get anywhere. Help!
You should be given the certificate, or cookie, by the website. See if in Preferences (under Safari on the menu bar), Privacy, do you have certificates blocked Always?
-
Re: after updating the app Flight Tycoon, I cannot access the game. Each time I click on the app it goes back to the main page.
Send a bug report. And wait for an update.
OR
uninstall and re-instal the game all over. -
E-mail whether hotmail or g-mail, will blank out as I click on links within the mail. It goes back to the home screen. more and more often, the mail folders just vanish, and I have to go to settings and re-click "done" on each acct., even though all are filled in properly. started after I upgraded to 7.0.4
You can try to copy the text to the clipboard (Ctrl + A and Ctrl +C) if you need to refresh.
"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
When ever i try to sync my ipod touch, my itunes wont let me on my mac becasue it says i do not have enough access privileges for this operation. What should i do?
Try here:
iPhone - not enough access privileges: Apple Support Communities -
My safari keeps crashing and going back to the home screen
My safari keeps crashing, shutting down and going back to the home screen. Any help would be appreciated.
Many thanks.My safari keeps crashing, shutting down and going back to the home screen. Any help would be appreciated.
Many thanks. -
Why does firefox keep going back my a previous page after i want to go elsewhere?
when I am in google looking for images and i go to change my search criteria, firefox goes back to the previous page i was on right after i hit my arrow to go. then i have to do this time and time again. and it's getting frustrating!
Hello Mandy.
I can't think of a scenario where Firefox would make itself the default browser against the user's consent. Still, go into Tools > Options > Advanced > General > System defaults and untick that small box at the bottom of the window that talks about Firefox asking you each time it starts.
Hopefully that will fix the issue. -
Was there a problem with the last update? Every time I try to watch videos it goes back to the home screen
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My MacBook was acting weird like sometimes I would log on and I wouldn't be able to type my password for a couple seconds,but it usually logged in after that. Then I left my computer open after installing the recent update after that all my applications were not responding. So I shut it down, when I turned it back on about an hour later it went to this loading screen and then to the login like usual. After I tried logging in a white screen flashed and it went back to the login/ password screen like nothing happened. Any ideas on what happened and what I can do to fix it?
Reinstall OS X;
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Maybe you are looking for
-
How do i run windows programs on mac
How do i run a windows program on my mac? Is there a particular application for it? or do i need to download and install a virtual windows software? - if so, can anyone suggest any names for software. I've heard about virtual box.
-
Please , i want a solution for this problem
i have BB 9300 3g , i connect to my wireless network , it connect smoothly , but when i open my browser and type any site in the adress i got this error "cant find the requested server" i updated my device to version 6.0 .... and still the same error
-
I tried to install windows 7 with boot camp but got no luck. I get asked to press any key but no key will work! Tried an aly keyboard and also normal windows keyboard. Neither of them seem to work at the caps lock light deosnt come on. So, I installe
-
"Enter in role" button missing in BEx Analyzer 7
Hello all, I cannot see the button/option to enter an existing query into an existing role. I simply do not see the button "Enter in Role" in BEx Analyzer 7. I have SAP_ALL / S_RS_EXPL_A / S_USER_AGR access. I do not want to do this thru Designer or
-
How not to print the background?
How can I only print the content of a sprite (here a simple text) without the background color of the document? Thanks for your help.