When i am running the RBDMDOC it will not genarated the idoc for the infotype 0105

               Hi experts,
                        I am run a pa40 action and change the record of 0105 infotype, in bd64 as part of data filtering I am also mentioned 0105 . but when I am run the RBDMIDOC  the idoc is not generated of the infotype 0105 .
Thanks in Advance .
Venkateswara Rao.

Hi Venkat Narayan,
   Thank for giving such a help,
1.   I am created record for the infotypes  i.e :0,1,2,6,105.
2    In bd64 I done a data filtering for above infotypes , its fine , but when I am running the bd21   Tcode the idoc is generated for    0,1, 2,6,. it is not generated for p0105.
     please find the following screen shorts.  
Thanks.
venkat

Similar Messages

  • I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?

    I have Lightroom 3 and have installed it on my Retina iMac running Yosemite. It will not show me any of the modules..error when attempting to change modules.. and keeps asking for my serial number every time. Is it compatible?
    David

    This is a duplicate thread - see here

  • I am trying to sync a playlist to my Nano,  but when I click on the Music tab at the top, it will not allow me to select the option Selected Playlist, Artists, etc.  I cannot un-check the Entire Music library option and check the Selected Artist - on

    I am trying to sync a playlist to my Nano,  but when I click on the Music tab at the top,
    it will not allow me to select the option Selected Playlist, Artists, etc.  I cannot un-check the Entire Music library
    option and check the Selected Artist … one.
    I have changed the Sync option to Manually sync, but that does not help.
    How can I change this to the second option?
    Thanks.

    There is a checkbox above those two options for how to sync.  It says Sync Music; it enables automatic syncing.  That box needs to be checked before you can select from the two options for how automatic syncing is performed.
    NOTE:  If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
    So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
    Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting).  Please post back with more details about your situation. 

  • Hello I have 2 seperate airport express systems on my network, each connecting to a stereo in a different room.  suddenly, the one in the living room will not stop flashing amber, but the one in the bedroom works fine.  I have already tried resetting it

    Hello
    I have 2 seperate airport express systems on my network, each connecting to a stereo in a different room. suddenly, the one in the living room will not stop flashing amber, but the one in the bedroom works fine. I have already tried resetting it with a pin, resetting it while plugging it in, and trying to find it in airport express setup (the setup assistant can't find it at all).
    What am i doing wrong?

    How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
    To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    Launch the AirPort Utility.
    Select the AX.
    If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
    Wireless Security: None OR, if you are using security on your wireless network:
    Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
    Password: <enter your wireless network security password>
    Verify Password: <re-enter the same security password>
    Click Update to write the new settings to the AX.

  • IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

    My IPad mini hangs on the Internet. Will not start. Have rebooted the home and on / off. There is internet in the house (using it now). Getting the message: Safari can not open the page ...... What do I do?

    Try this:
    1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

  • The Adobe website will not let me move to the checkout and pay after selecting lightroom 5 upgrade.

    The Adobe website will not let me move to the checkout and pay after selecting lightroom 5 upgrade

    use a different browser or, delete your adobe.com cookies and retry.

  • The "SignFile" task was not given a value for the required parameter "CertificateThumbprint"

    We have a line of business app which is deployed via clickonce. I can build and publish the application without any problems but when I try to use Continuous Integration (Build each check-in) I get the following error:
    2>C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets(3450,5):
    error MSB4044:
    The "SignFile" task was not given a value for the required parameter "CertificateThumbprint".
    [C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj]
    Done executing task "SignFile" -- FAILED.
    We sign the application (to be more specific: the ClickOnce manifest) using a code signing certificate which is registered in the AD as Trusted Publisher.
    The Certificate is stored in Certificate store on my local workstation. The Certificate is also in the certificate store of the build server (1. In the Personal Store, 2. in the Personal store of the TFSBuildServiceHost Service Account and 3. in the Personal
    store of the tfs/build server itself).
    Where are using Visual Studio 2013 Update 4, C#, .Net 4.5 and TFS 2013 Update 4.
    I have no clue what causes this error, any help is appreciated.

    I installed the
    Windows Software Development Kit (SDK) for Windows 8 and now I can build the solution via command line.
    "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\MSBuild.exe" C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln
    "C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe" C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln
    But the TFS Build still fails.
    Here is the error output gathered from the tfsbuild logfile:
    Task "AL"
    C:\Program Files (x86)\Microsoft SDKs\Windows\v8.1A\bin\NETFX 4.5.1 Tools\x64\AL.exe /culture:de /out:obj\Debug\de\Pulse.resources.dll /platform:AnyCPU /template:obj\Debug\Pulse.exe /embed:obj\Debug\Pulse.View.Localization.CreditsView.de.resources /embed:obj\Debug\Pulse.View.Localization.PulseMainWindow.de.resources
    Microsoft (R) Assembly Linker version 12.0.20806.33440
    Copyright (C) Microsoft Corporation. All rights reserved.
    Done executing task "AL".
    2>Done building target "GenerateSatelliteAssemblies" in project "Pulse.csproj".
    2>Target "CreateSatelliteAssemblies" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "CoreBuild" depends on it):
    2>Done building target "CreateSatelliteAssemblies" in project "Pulse.csproj".
    Target "SetWin32ManifestProperties" skipped. Previously built successfully.
    Target "_DeploymentComputeNativeManifestInfo" skipped, due to false condition; ('$(GenerateClickOnceManifests)'!='true') was evaluated as ('true'!='true').
    2>Target "CleanPublishFolder" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "_DeploymentComputeClickOnceManifestInfo" depends on it):
    Task "RemoveDir" skipped, due to false condition; ('$(PublishDir)'=='$(OutputPath)app.publish\' and Exists('$(PublishDir)')) was evaluated as ('bin\Debug\app.publish\'=='bin\Debug\app.publish\' and Exists('bin\Debug\app.publish\')).
    2>Done building target "CleanPublishFolder" in project "Pulse.csproj".
    Target "_DeploymentGenerateTrustInfo" skipped, due to false condition; ('$(TargetZone)'!='') was evaluated as (''!='').
    2>Target "_DeploymentComputeClickOnceManifestInfo" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "GenerateApplicationManifest" depends on it):
    Task "Copy"
    Creating directory "bin\Debug\app.publish".
    Copying file from "obj\Debug\Pulse.exe" to "bin\Debug\app.publish\Pulse.exe".
    Done executing task "Copy".
    Using "SignFile" task from assembly "Microsoft.Build.Tasks.v12.0, Version=12.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a".
    Task "SignFile"
    2>C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets(3450,5): error MSB4044: The "SignFile" task was not given a value for the required parameter "CertificateThumbprint". [C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj]
    Done executing task "SignFile" -- FAILED.
    2>Done building target "_DeploymentComputeClickOnceManifestInfo" in project "Pulse.csproj" -- FAILED.
    2>Target "_CheckForCompileOutputs" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "_CleanGetCurrentAndPriorFileWrites" depends on it):
    2>Done building target "_CheckForCompileOutputs" in project "Pulse.csproj".
    Target "_SGenCheckForOutputs" skipped, due to false condition; ('$(_SGenGenerateSerializationAssembliesConfig)' == 'On' or ('@(WebReferenceUrl)'!='' and '$(_SGenGenerateSerializationAssembliesConfig)' == 'Auto')) was evaluated as ('Off' == 'On' or (''!='' and 'Off' == 'Auto')).
    2>Target "_CleanGetCurrentAndPriorFileWrites" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "_CleanRecordFileWrites" depends on it):
    Task "ReadLinesFromFile"
    Done executing task "ReadLinesFromFile".
    Task "ConvertToAbsolutePath"
    Done executing task "ConvertToAbsolutePath".
    Task "FindUnderPath"
    Comparison path is "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse".
    Done executing task "FindUnderPath".
    Task "FindUnderPath"
    Comparison path is "C:\Builds\1\Pulse\DefaultBuild\bin\".
    Done executing task "FindUnderPath".
    Task "FindUnderPath"
    Comparison path is "obj\Debug\".
    Done executing task "FindUnderPath".
    Task "RemoveDuplicates"
    Done executing task "RemoveDuplicates".
    2>Done building target "_CleanGetCurrentAndPriorFileWrites" in project "Pulse.csproj".
    2>Target "_CleanRecordFileWrites" in file "C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets" from project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (target "CoreBuild" depends on it):
    Task "RemoveDuplicates"
    Done executing task "RemoveDuplicates".
    Task "MakeDir"
    Done executing task "MakeDir".
    Task "WriteLinesToFile"
    Done executing task "WriteLinesToFile".
    2>Done building target "_CleanRecordFileWrites" in project "Pulse.csproj".
    2>Done Building Project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (default targets) -- FAILED.
    1>Done executing task "MSBuild" -- FAILED.
    1>Done building target "Build" in project "Pulse.sln" -- FAILED.
    1>Done Building Project "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln" (default targets) -- FAILED.
    Build FAILED.
    "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse.sln" (default target) (1) ->
    "C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj" (default target) (2) ->
    (_DeploymentComputeClickOnceManifestInfo target) ->
    C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets(3450,5): error MSB4044: The "SignFile" task was not given a value for the required parameter "CertificateThumbprint". [C:\Builds\1\Pulse\DefaultBuild\src\Pulse\Pulse\Pulse.csproj]
    0 Warning(s)
    1 Error(s)

  • I downloaded the new version and it has reverted to the old and will not let me re-install the new because it thinks it is installed

    I downloaded the new version of Pages and it has reverted to the old version.  It will not let me re-install the new version because it thinks it has it installed

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed over 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store.
    Peter

  • I have a new computer and the itunes store will not allow me to use the remaining balance on my gift card.

    i have a new computer and the itunes store will not allow me to redeem my remaining balance.  How to handle.

    Details, please. What exactly is happening? How is it "not allowing you" to redeem your balance?

  • When buying on line my macbook pro will not let me go to the payment page of the web site

    When purchasing goods over the internet my MacBook Pro will not allow me to go beyond the payment page therefore I am unable to complete my purchase. If I use a Windows operated PC in the same household I do not have this problem.
    Are there any security settings on my MacBook preventing me going any further?
    Les

    Your MBP will let you do everything. What you haven't told us is what browser, what prompt comes up when you select pay, and does this happen on every web site you buy stuff on.

  • TS3230 When scrolling down a web page, Safari resets to the top of the page and will not stay where I stopped the scroll..

    When two finger scrolling in Safari, it resets itself to the top of the web page - not where I stopped.

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

  • Attempting to locate files that have exclamation point. When brought to my external hd LR will not open. Looking for any advice.

    LR will not open photos off of my external HD that I attempt to open even when copied to the desktop and attempted to open from there.

    http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  • I have upgraded to a new computer and Windows 8.  I cannot install Photoshop 6 which was an upgrade version from Windows 5.5, 5, 5.  The original 5 will not install and without it, the Photoshop 6 has no original version to load from.

    How do I install Photoshop 6 on Windows 8., when my original Windows 5 will not install?

    If you were actually talking about CS5.5 and an upgrade to CS6, you only need the serial numbers from both products.  Adobe's installer will look for CS5.5 on your system and when it doesn't find it, you will be prompted to enter that qualifying product's serial number.
    Nancy O.

  • I want to start my Time Machine. I bought a Goflex Home which says it is compatible with my iMac but it refuses to download an update of the software. This means the Time Machine will not operate. What is the problem?

    I want to start Time Machine. I bought a Goflex Home netwrork storage system, which says it is compatible with Imac. Each time I go online to try to get any updates, it always comes back saying Error. In other words, I can't start Time Machine because I can't get any software updates. Anyone else experiencing problems with Seagate software updates?

    If you want to use Time Machine the Seagate software is unnecessary. The drive is probably ntfs format which is not for the Mac.
    Manually preparing a new disk for Time Machine
    If you want to erase a disk before using it with Time Machine, follow these steps:
    Open Disk Utility (located in the Utilities folder).
    Connect the disk if it isn't already attached.
    In the left side of the Disk Utility window, select the disk you want to use with Time Machine.
    Optional: If you want to partition the disk, click the Partition tab and select a layout. Make sure "Mac OS Extended (Journaled)" is selected in the Format menu for the partition that will be used for backups. Click Apply.
    Click the Erase tab.
    Optional: If you want to securely erase the disk, click Security Options to configure, then click OK.
    Click Erase.
    After erasing, open Time Machine preferences in System Preferences and configure as described in the section above.
    Reference:  http://support.apple.com/kb/HT1427

  • TS1398 My wireless router failed and I had to purchase a new one. My security on the new one will not allow me to use the same password. I entered a new password, but of course it is not on my ipod or ipad mini . How can I enter new password ?

    My wireless router in my home has failed. I purchased a new router, but it will not allow some of the characters which I used for my old password. Therefore I cannot access the internet with my ipad mini or my ipod touch. I am unable to change the password on either device. How do I go about changing the password on these units so that I can access the internet? Thanks
    Terry Beckingham

    http://www.apple.com/support/appleid/contact/

Maybe you are looking for