When i am trying to Activate an ADOBE Form Layout its "No Vendor specified"

Hi Friends,
I have created one interface with one field CARRID.
By using this interface I have created one simple ADOBE Form layout with one filed CARRID.
I specified all the properties for this object. Like default value, name etc...
when i tried to activate the form its showing the status message "No Vendor Specified"
And its not Activating. it remains as inactivate state.
Plz Any helps...
Regards,
Shree.

You're going to have to debug to figure out what the actual error message is.  Just do a /h before hitting activate and set a break-point at the "message" abap statement.
SAP in it's infinite wisdom decided to change message 001 of message class 00 from &&&& to "No Vendor Specified".  They didn't really think that one through though, because the ABAP construct (that SAP uses all over the place)
message [text] type [type]
is the equivalent of
message [type]001(00) with [text]
Because they changed the contents of the message, this construct (which hasn't been marked as obsolete, interestingly) is essentially worthless.
The last time I checked, there were a few OSS notes that address the issue - but they are specific  for specific error scenarios changing the way the message is issued.  I haven't seen a fix that changes message 001 of message class 00 back.  But then, it's been a few weeks since I looked.

Similar Messages

  • SOFFICEINTEGRATION143 Error in ISR when trying opening adobe form layout

    Hi,
    I'm running into SOFFICEINTEGRATION143 error when trying to open any adobe form layout in the ISR secenario definition. Can anyone let me know why I'm getting this error and what the solution is?
    FYI, I'm using SAP gui version 640 Final Release, File Version 6404.4.14.2987, build 781208, Patch level 14
    I do have Adobe LifeCycle Designer 7.1, Reader 8 and MSOffice 2002.
    Thanks in advance.
    Giri.

    Hi, Giri. Did you solve your problem?
    I think I m having similar problem. I installed Sap Gui 7.1, SAP interactive form and Adobe LiveCycle Designer ES.
    I was able to open abode form layout in the transaction SFP. However, after I upgraded my Adobe to 7.0.9. (previous version is 7.x.x). I get the error SOFFICEINTEGRATION143 when try open again.
    I uninstalled Adobe 7.0.9 and installed Adobe 8.1 but it still get the same error.
    Can anyone help?
    Thanks in advance.

  • When I am trying to activate my membership which was bought in the states, I am told that the membership cannot be activated, as my Adobe ID is linked to a different country. I need the creative cloud apps immediately. What should I do to start working/ac

    When I am trying to activate my membership which was bought in the states, I am told that the membership cannot be activated, as my Adobe ID is linked to a different country. I need the creative cloud apps immediately. What should I do to start working/activate my membership?

    Make sure that EVERY DETAIL is the same in every place you enter your information
    Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html
    -Credit card https://helpx.adobe.com/utilities/credit-card.html
    -email address https://forums.adobe.com/thread/1446019

  • Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"??  It happened with Reader and now with Flashplayer.  With the Reader, I was able to find a different install

    Why is it that when I am trying to install an adobe product, I get 33% of the way through and then it gives me an error "unable to load metafile"??  It happened with Reader and now with Flash player.  With the Reader, I was able to find a different installation link using the troubleshooting guide.  I cannot find the same with flash player.  Please tell me how to install Flash player because there is a website that I cannot even view without it.  BTW That is annoying that I cannot even see the website without flash player
    my system is XP

    Use these installers:
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Flash Player for Mac OS X
    For Adobe Reader go to http://get.adobe.com/reader/enterprise/

  • Error when activate the Adobe forms

    Hi,
      I am getting the below error message when activate the adobe forms,and the message tells that to install a forms design tool,please tell me which tool in need to install and where i will get this tool.
    Could not start Layout Designer (see long text)
    Message no. FPUIFB086
    Diagnosis
    The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
    Procedure
    Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
    Also read SAP Note 801524.
    Thanks,
    Deesanth.

    FIrstly, you have posted the question in the wrong forum. There's an entire forum in SCN only for Interactive Forms: .
    Secondly, this is a frequently asked question, especially in the Interactive Forms Forum. There's enough information there to get your query solved by searching.
    pk

  • I am trying to activate our adobe in-design and we are getting a message "serial number you provided is valid but a qualifying product could not be found on this computer"

    I am trying to activate our adobe in-design and we are getting a message "serial number you provided is valid but a qualifying product could not be found on this computer"

    Hi there!
    Are you certain that the serial number is for InDesign? And the correct version?
    Please feel free to PM me if you wish to verify the serial number.
    Thanks,
    Amy

  • I'm getting a error that says NONE when I'm trying to reset up Adobe Photoshop Element. How do I fix it?

    I'm getting a error that says NONE when I'm trying to reset up Adobe Photoshop Element. How do I fix it? I already have the program but updated my computer from Vista to windows 7, and it didn't transfer over. What do I do?

    Sorry, but I'm not clear when you get the message NONE.
    Which version of Photoshop Elements do you have?
    Have you installed Photoshop Elements on your Windows 7 system?
    What are you doing when you get the message NONE?
    Brian

  • I am trying to Activate my Adobe Photoshop CS5 licence on a 64bit installation

    I am trying to Activate my Adobe Photoshop CS5 licence on a 64bit installation but it says invalid serial number.

    Contact support directly by phone, web chat or web form.
    Mylenium

  • Hi, i bought an iphone 5 through ebay, when i am trying to activate, its asking for a icloud user name and password, but i am unable to contact the owner, but its not black listed. is there any solution? please help me.

    hi, i bought an iphone 5 through ebay, when i am trying to activate, its asking for a icloud user name and password, but i am unable to contact the owner, but its not black listed. is there any solution? please help me.

    Hello there, Ark.
    It sounds like the iPhone has Activation Lock still activated. The following Knowledge Base article provides the methods available for removing the previous owner's account:
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • I am trying to sync to Outlook 2010.  I get a weird error message when I am trying to setup on my pc.  Its not english.  It says "der automatische refresh konnte nicht gestartet werden"  Help!

    I am trying to sync to Outlook 2010.  I get a weird error message when I am trying to setup on my pc.  Its not english.  It says "der automatische refresh konnte nicht gestartet werden"  Help!

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Hii,,, i am using iphone 3g, i am trying to install apps from apple store,, installation stop in middle,and say u have to do install through itunes from your laptop. when i am trying to install it from my laptop,, its failed again n again,, help me out ,,

    hii,,, i am using iphone 3g, i am trying to install apps from apple store,, installation stop in middle,and say,, u have to do install through itunes from your laptop. when i am trying to install it from my laptop,, its failed again n again,, help me out ,

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • When i am trying to restore backup to my iphone, its coming up that back is not compatible with iphone. Please help me restore backup.

    Hi
    When i am trying to restore backup to my iphone, its coming up backup is not compatible with iphone. Please help me restore.
    Thanks
    Mandy

    From the article that the question was posted from:
    Error 1611
    This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    Try reading the solutions you find in the future and follow them.

  • Issue with Adobe Form Layout

    Hi,
    I have an issue with the Adobe Form Layout.Although I have added a field in the Context Menu of the Form Builder but the context has not been added to the Data View.
    Could you please help me to understand how to include the parameters and structures that we define in the context and add them to the Data View in layout?As far as I know, it is done automatically.But in this case I don't understand what the problem is.
    Please help me.
    Thanks,
    Sandeep.
    <MOVED BY MODERATOR TO THE CORRECT FORUM>
    Edited by: Alvaro Tejada Galindo on Jul 14, 2009 4:10 PM

    it is normally done automatically. Do ANY of your fields show in your DATA VIEW? Or, are you just missing the new one?
    If you're only missing the new one, make sure your Context has the field defined correctly and generated.. Then make sure you have updated the mapping in your View Context and generated that.
    After those 2 things, your field should now show.
    You cannot, as far as I know, define an attribute as any sort of TABLE - we have a common structure that has several Table Types in it. When we import that structure, we have to delete those attributes and create Nodes to mimick those tables.
    If you've accidentally included a Table type as an attribute, you won't see any fields in your Data View.
    EDIT: by the way, there's an Adobe Interactive Forms Forum where you should ask these kinds of questions.
    Edited by: robert phelan on Apr 2, 2009 8:51 PM

  • How to hide 'SAVE' button in adobe form layout

    Hi  Friends,
    I have a requirement to hide 'SAVE' button in adobe form layout .They dont want to save the form .
    Is there any way to achieve this .I have gone through scn ,but couldnt find the proper solution
    Thanks and Regards,
    Subeesh Kannottil

    Hi Subeesh,
    Are you talking about restricting the User from Saving the Adobe Form Output. 
    Regards,
    Sivanand Ala

  • Adobe form layout version retrival

    Hi Experts,
    I have a problem in opening the adobe form layout.I am facing an error message error while opening the document.I checked in the production system same problem there also.
    it is possbile to retrevive the older version of layout?
    Adobe life cylce designer is installed properly. But i am able to open the layout of another adobe form in another development system.
    Please suggest me on this.
    Regards,
    Jayant.

    Hi,
    ADS needs to be configured properly,
    this is the part of BASIS team.
    regards
    Ramchander rao.K

Maybe you are looking for

  • Business Services Development

    In EnterpriseOne Tools 8.97 you're enable to create web services from business services. THAT'S GREAT! It can solve most of problems. But I cann't see any example, could you advise me some about this.

  • Brand new ipod Touch (8GB) does not work with DHCP

    I have a brand new iPod Touch (8GB) that will not work using DHCP. No matter what I do (reset router, reset ipod) the DHCP still doesn't work. I can manually setup an IP/Gateway/netmask/etc. and it works but I really need the DHCP to work if at all p

  • IdleURL Not Showing Extensions

    I have the idleurl asp code from the most recent sdk working on my phone. However unlike the screenshot, the extensions on the right side are not showing up. (The little phone next to the button is showing thereby noting that I have a phone line), ye

  • Clear the page when navigate through menubar

    Hi All, Need help to resolve the problem. In my page, i have menubar with couple of command menu item. One is for to enter new record and another is for to search the record. When i click the search menubar, it will take to search screen and i can ab

  • All my contacts disapeared, how do i get them back

    all of my contacts disapeared, how do i get them back?