When I am using Logic Pro my midi keyboard is touch sensitive.

How do i get it to play the same pressure throughout?
As in, no matter how hard i touch the midi keyboard note i wish logic to record the same note pressure all the time.
Thanks

OK, you've actually not clarified it. It is still unclear if you mean velocity or aftertouch (aka pressure)
Velocity is how quick/forceful you play a key. You seem to mean this, judging from your second sentence.
Aftertouch (aka Channel Pressure, or, rarer, Polyphonic Pressure)* is the force with which you HOLD the keys down (that's why it is called after-touch). If you mean velocity, then my guide will do what you ask. Have you tried it?
* Most cheaper MIDI controllers and synths don't have aftertouch, and only some top enders have polyphonic aftertouch (=every key with individual AT-sensor)
http://www.harmonycentral.com/t5/Keys-Synths-amp-Samplers/keyboards-with-Poly-Af tertouch/td-p/310574

Similar Messages

  • Logic Pro X midi keyboard (EXS24 help)

    So im  new to logic (December 2013) and have been using it to make some hip hop beats. I use a akai mpk25 keyboard with logic pro x. I have been using the EXS24 sampler a lot in my production. I have saved many sampler instrumentals with different kicks, snares, percussion etc. And for the longest time the left most key on my mpk was C2 inside of logic. And all my exs instruments started with C2 and worked its way down so every key played a different sound. Now randomly, dont know what I did but its saying that leftmost key is C1 and when i hit the keys on the left side of my keyboard no sounds come out until i get to about the middle of the keyboard where the new C2 is..... Probably an easy fix but i dont know Im a rookie lol. Only like half the sounds will play in all my sampler instruments and i would appreciate some help. thanks

    While it could be Logic, have you checked your keyboard manual and see if you accidently hi the transpose buttone or octave change button. I would look there first

  • What Garageband files can I delete when I only use Logic Pro?

    My Mac's choc-full of Logic and GB files and I'd like to make some space.
    I know Logic uses some GB loops, settings and other resources – and I may even have duplicates – but I don't know how to streamline it all.
    Tips would be much appreciated. Thanks!

    In Logic, you can access GB's instruments, but you might not want them - so you can delete GB's Instrument Library (in HD/Library/Application Support/GarageBand). Otherwise, there's not much to get rid of.
    Look for duplicate loops here: HD/Library/Audio/Apple Loops.

  • I am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

    i am trying to use logic pro 9 on my lion system and it continues to say I have a bad midi...when i go to check my midi drivers folders in my library its empty...does anyone know whats going on?

    I
    got your message about making sure to use the machine specific disk that came with my machine. Unfortunately, Apple no longer sells Tiger replacement disks. I've got a couple of bids out on ebay, and will update when I have news to add to this post.
    Thank you for your help, Frank!
    To be clear you called the 800 number and explained what the situation was, old machine and lost the original DVD's?
    Just checking because if you just called and tried to buy the DVD's they might tell you they no longer sell them but you aren't really trying to buy them your trying to replace the ones that are missing.
    Ebay may work but there is a certain specificity to the DVD's required which, even if they seem right, might not work.
    Good luck either way. If you get a chance when you get the DVD's I'd be interested in hearing how it all works out.
    regards

  • How to create chord charts from midi using logic pro x

    How to create chord charts from midi using logic pro x

    Depending on what you mean by Chord charts (Tabs?)
    Use the Score.......
    http://help.apple.com/logicpro/mac/10/#lgcpf755d649

  • Ich nutze Logic Pro um Midi-Files zu bearbeiten. Unbearbeitete Midi-Files werden von Qmidi mit deutschen Buchstaben ä, ö, ü, ß wiedergegeben. Sobald ich das midi-file mit logic-Pro bearbeitet habe werden die Buchstaben nicht korrekt wiedergegeben

    Ich nutze Logic Pro um Midi-Files zu bearbeiten. Unbearbeitete Midi-Files werden von Qmidi mit deutschen Buchstaben ä, ö, ü, ß wiedergegeben. Sobald ich das midi-file mit logic-Pro bearbeitet habe werden die Buchstaben nicht korrekt wiedergegeben. Dies passiert auch, wenn ich keine Änderungen im Midi-File vorgenommen habe. Bei Qmidi kann ich die Schriftarten / Einstellung " Western ( ISO Latin 1 ) " eingeben und diese Buchstaben werden korrekt erkannt. Es muss daran liegen, was Logic Pro aus dem Midi-File macht.
    vielen Dank für Eure Hilfe im voraus
    I use Logic Pro to edit midi files. Unprocessed Midi-Files reproduced from the programm "Qmidi" with German letters ä, ö, ü ß. Once I have edited the midi-file with logic-Pro are not correctly play back the letters. This also happens when I have not made any changes in the midi file. In Qmidi I can the font / setting "Western (ISO Latin 1)" and enter these characters are correctly recognized. It must be because what makes Logic Pro from the midi file.
    Thank you for your help in advance

    That's clearly a bug. Please send this to Apple using their feedback form:
    http://www.apple.com/feedback/logic-pro.html
    Best,
    DaCaptain

  • Can I use Logic Pro 9.1.6 on two computers with one licens

    I have download and install Logic Pro 9.1.6 on my MacBookPro 13". I record on location with my MacBook an wil edit and arrange the music on my iMac at home. Can I use Logic Pro 9.1.6 on two computers with one licens. I'm the owner of both computers. If it can where can I find the program on my MacBook? and how to install and register?

    Hi, is  the iMac also 10.6.8? I had an iMac die when 10.6.8 was installed, it worked at first but after some You Tube flash videos the screen just locked and no mouse clicking anywhere did anything. It turned out that most older iMacs [ mine was from august 2007] have a graghics chipset that can't handle Snow Leopard, there were [are?] 77 pages on this "locked screen"topic in the Snow Leopard forum. I checked out a web site that tells you how much your mac is worth by filling in the sereal number-mine was worth only $168, I may give it to a friend for his children to play with, although that seems unholy. I doubt anyone woud buy it,the problem is now so well known that even Apple certified resellars here in the Netherlands refuse to repair them,they claim Apple will revoke their certification if they replace the faulty Graphics unit,it is also VERY hard to get to that unit in an iMac, everything is so tightly packed inside.
    If your iMac is running Mountain Lion[10.8.0] you may have to change the app store preference to accept apps from all sites,normally ML will only allow app store apps to be downloaded.

  • Keep getting message pop up "Error reading/writing file  "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

    Logic froze while I was working on something so I forced quit.  Now every time I open LOGIC a message pops up that says:
    "Error reading/writing file
    “com.apple.logic.pro.cs”:
    Logical end-of-file reached during read operation."
    The only button option is cancel so I press it and another message appears that says:
    "The Preferences are not loaded completely.
    Do not save them, as you would overwrite the Preferences file with incomplete data."
    Then when i close logic a box appears saying:
    "The Preferences are not loaded completely.
    Save them to "com.apple.logic.pro.cs" anyway?"
    There are 3 button options to press; ok, cancel or dont save.
    I press "don’t save" cuz I don't want to ruin anything.
    I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem.  If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done?  I have hundreds pieces of music files I've created.  I'm scared to mess anything up with all the hours and months of work I've done.  Is there anyway to fix this without loosing anything?  I'm using Logic Pro 8.
    Thank you

    You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
    Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

  • Hi i use a macpro i7 wt 7200rpm internal drive i get this message Disk is too slow-(prepare) (-10001) when i am using logic 9

    Hi i use a macbook pro 17" 2.66ghz intel core i7 with 8gb ram & a 500gb@7200rpm internal drive i get this message "Disk is too slow. (Prepare)  (-10001) when i am using logic 9 wiyh just a 5 vsts loaded 2 of them being esx24's . i used to not get this warning earlier in the same or even heavily loaded projects.
    When i press play the beachball appears for a minute or so then the message.
    Even when i open up a new project a beachball appears for about 30-40 secs and then the project opens up
    i have even tried opening up the projects w/o any vst's loaded (i have disabled them from audio units manager)
    Initially i thought it was a hard drive problem so apple had it replaced for me but i am still encountering the same problem.
    have even tried disabling the sudden motion sensor from terminal no luck there too
    tried reloading osx 10.6.7 no luck there too
    what do i do
    aggi

    How full is your 500 GB hard disk?
    Do you have 10% to 15% free space available?

  • Using Logic Pro with Reason 3.0

    I am trying to use logic Pro with reason 3.0. I want to be able to sync them together to use redrum within reason as my drum machine. I am using a MOTU 828 mk II audio interface with 8 in's and 8 out's.
    When I start logic first and the reason I am not hearing any sound from reason. I can see the meters move in the mixer of reason but I hear nothing.
    From the standard documentation that comes with Logic all I can figure out is that rewire is there to sync any other rewire program so that can run side by side of one sequences transport controls.
    I want to be able to hear audio from both my arrangement in Logic and in Reason at the same time in the same song in sync.
    Can someone please tell me firstly if this is possible and if so how can I implement this kind of setup.
    Thanks in Advance.
    amerretz

    Common problem. LP doesn't rewire 'out of the box'.
    There are two ways to do this (well, more, but I'll tell you 2)
    1 (Easy Way):
    Restart Mac (Just to be sure things are sorted, not everytime)
    Launch Logic
    Launch Reason
    Arrange Window
    Choose a Channel> Pan Left
    Go to the Middle section of the Parameters on the Left
    With the Channel pop up menu, select Rewire> RWMix L
    Repeat for the Right and away you go.
    2 (More Advanced)
    Environment Window
    In the Middle section of the parameters on the Left select Create
    Name it Rewire
    Under that windows "New" pull down (Top Left), pull down to Audio Object
    In the "Channel" pop up (Left, bottom section) select>Rewire (Left, right, 3,4... What ever you want.
    Double Click the Audio Object to expand it
    Pan Left or right, or whatever you need.
    Rename if you wish
    Do the same for the other stereo sideNow's the fun part. Assign these stereo pairs to a bus (above the fader, the default is "Out 1-2")
    Go to the Mixer window
    Double click the Bus you assigned, this puts it in the arrange window
    Arrange window
    Name the Bus "Rewire" or "ReDrum" or something great like that.
    Now you can use it like a stereo pair (which I wish Logic had) for automation and effects and such.

  • TS5406 I reinstalled my OS (Mavericks) and when I now open logic pro x

    I reinstalled my OS (Mavericks) and when I now open logic pro x I dont have any drum machines or any other old library categories on the left. Theyve been replaced with drums and percussion, voice, etc. If I open an old project they reappear. Any ideas?
    <Edited by Host>

    Make sure you have signed into the Mac App Store using the same Apple ID you used to purchase it originally.
    Then and only then will; it show up under the Purchase tab...
    If you are sure you are using the correct Apple ID then contact Apple directly and ask them for assistance.
    http://www.apple.com/contact/

  • Using Logic Pro 9 with Mavericks

    Hi all
    I recently upgraded to Mavericks and when I came to using Logic Pro 8 I found a problem with the tape bar indicator on the arrange window adding black blocks as it moves across the screen. I understand that this is a well known issue. My question is: Will upgrading to Logic 9 solve this? I do not want to upgrade to Logic X so just need to be sure that Logic 9 will solve the problem. many thanks

    While upgrading to Logic Pro 9.1.8 will work with Mavericks, how do you intend to purchase Logic Pro 9 as it is no longer sold by Apple.

  • Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

    Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

    For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence  and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
    Have a nice day

  • After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of

    After I purchased the creative cloud, I receive an error message when trying to use premier pro cc 2014.  It states "Adobe Premiere Pro 2014.2 has stopped working.  A problem has caused it to stop working.  Windows will close the program and notify you of a solution."  When I used the trial I never received this message.  Now after purchasing it I receive this error each time I open PP and am unable to use. it.  Any ideas or support to fix this issue?

    What does the detailed crash report say?
    And have you updated your video card drivers from the GPU maker's website? (most crashes on launch are due to bugs in out of date video card drivers)

  • "Can I use Logic Pro in my new imac with 2.66 intel core 2 duo"

    Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
    I have a 002 rack from digidesign, that should be good running with a logic pro 8 DAW.

    Can I use Logic Pro in my new imac with 2.66 intel core 2 duo? With the new leopard operating system?
    Yes. Click here for more information.
    (40435)

Maybe you are looking for