When i apply patch 43worker occur afcmgf.odf error when apply patch 4334965
when i apply patch 4334965, it occur error with: FAILED: file afcmgr.odf on worker 14 for product fnd username APPLSYS.
then the others worker's status is wait, how to resolve? and how did i know what's wrong?
Fadi,
Thanks a lot for you information, it is very helpful.
I am new to APPS, I did not know how to handle it last night
Another question, if I initiate another session to adctl to restart the failed worker, will the adpatch resume automatically?
Thanks,
Hank
Similar Messages
-
This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W -
I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.
Nevermind I fixed it. Thank you.
-
An error has occurred: An unknown error has occurred
I have a report using InvoView for input parameters and displaying the output. The report uses a date range to select data from the database. I can run the report for many dates and date ranges, but when I use one particular date the report produced the following error after about 20 minutes - "An error has occurred: An unknown error has occurred". This error is displayed in the InvoView window. I can see the pageserver.exe thread still executing in the database monitor, so I know the thread is still processing. Any help in determining what is this generic error and any how to resolve this issue would be greatly appreciated.
GeorgeI'm kinda guessing here, but it sounds data related...
Are you sure there's data for 1/28/09? Does the report assume there's data, and it's doing something it shouldn't if there's no data?
Can you scan the data for this date and see if you're getting valid data for all fields?
What is your data source (database, excel, whatever)? Might a "date" field have an invalid date, for example?
If you don't have a lot of formula fields, add this to each (basic syntax):
dim debug as number
debug = debug / debug 'Cause divide by zero
This will pop up a window for each field as it is being calculated. Run the report with a different date, and note the order of the fields as they pop up. Comment out the divide by zero as each field pops up to get to the subsequent field. Re-run the report for the date that causes the error (after uncommenting the divide by zeros), and follow the same process, until the error pops up. This should give you an idea of what field has the issue. Manually walk through that field's calculation with the data for the record to see what fails.
If it's not the first record that causes the error message, you can control which iteration the divide by zero occurs on with something like:
dim debug as number
global dbgcnt1 as number ' probably want a different var for each formula field
dbgcnt1 = dbgcnt1 + 1
if dbgcnt1 > 10 then
debug = debug / debug 'Cause divide by zero
end if
HTH,
Carl -
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: DOMAIN\SA account
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
This is the error, if often find in my WFE's. I googled for the error and granted DB owner roles for the service account as specified in TechNet, but no luck.
Even same error logs generated on SharePoint logs.
SqlError: 'The target principal name is incorrect. Cannot generate SSPI context.'
Source: '.Net SqlClient Data Provider' Number: 0 State: 0 Class: 11 Procedure: 'GenClientContext' LineNumber: 0 Server: 'servername\SHAREPOINT,4101'
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
Unknown SQL Exception 0 occurred. Additional error information from SQL Server is included below.
The target principal name is incorrect. Cannot generate SSPI context.
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
System.Data.SqlClient.SqlException (0x80131904): The target principal name is incorrect.
Cannot generate SSPI context. at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions
userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnecti...
f2cbcc9c-ac65-7084-fcab-4d2943cdfdea
Thanks.
BadriFor SharePoint to recognize the SQL server name we provide its name and instance while installing SharePoint. When we are using SQL alias to connect to SQL, we need to configure the same alias on SharePoint server so that SharePoint recognize alias over
the network.
Having SharePoint connect to a SQL Alias instead of the NetBIOS name is always a good idea. The main benefit is, if you ever have to switch the SQL Server or connect to a SQL Cluster VIP address, you just change the Alias to point to the SQL Cluster name
on the SharePoint Server and restart the SharePoint Timer Service and you are good to go.
Please check this blog.
http://blogs.msdn.com/b/priyo/archive/2013/09/13/sql-alias-for-sharepoint.aspx
http://technet.microsoft.com/en-us/library/hh292622(v=office.15).aspx
Thank You, Pallav S. Srivastav ----- If this helped you resolve your issue, please mark it Answered. -
A Database error occured The database error text (CS) "Error on BindColwis
Hi All
msql analysis services Cube is source and based on this cubes universe is bult and when trying to referesh the reports in webi its giving error as
When I m refereshing the reports, Im getting the problem at refreshing time as
" A Database error occured The database error text (CS) "Error on BindCol wis (10901) msg its displaying.
Thanks in advance
RajHi,
Just change your database connection from OLEDB to ODBC and you should be all set.
Good Luck. -
ORA-20100: Error occurred while parsing:Error opening external DTD ( Asap)
Hi I'm using domsample example. And I have written the program. The xml file at the starting has this string"<!DOCTYPE MobileInventoryResponse SYSTEM "MobileInventoryResponse.dtd">", from which I'm getting error -"ORA-20100: Error occurred while parsing: Error opening external DTD".
I'm new to xml could you please help me to solve this problem. I assume this is related to DTD for which I need to set base path. But I'm not sure how to do it? I'm getting this xml file through CLOB which I'm able to parse until an extent. where in between got this error.
Here is my partial code:
l_doc_id := rec_xml_data.id;
l_xml_parser := xmlparser.newParser;
xmlparser.setValidationMode(l_xml_parser, FALSE);
xmlparser.parseCLOB(l_xml_parser,rec_xml_data.l_xml_data);--PARSING THE CLOB WHICH CONTAINS XML FILE
l_xml_doc := xmlparser.getDocument(l_xml_parser);
xmlparser.freeParser(l_xml_parser);
l_nodelist := xmldom.getElementsByTagName(l_xml_doc, '*');
l_length := xmldom.getLength(l_nodelist);
-- loop through elements
FOR l_rec_xml in 0..l_length-1
LOOP
l_node := xmldom.item(l_nodelist, l_rec_xml);
-- dbms_output.put(xmldom.getNodeName(n) || ' ');
-- get the text node associated with the element node
l_nodename:=xmldom.getNodeName(l_node);
l_node := xmldom.getFirstChild(l_node);
IF (xmldom.isNull(l_node) = false) THEN
IF xmldom.getNodeType(l_node) = xmldom.TEXT_NODE THEN
IF l_nodename = 'purchase-order-number' THEN
l_po_num:=NULL;
l_po_num:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Purchaser Order Num : '||l_po_num);
END IF;
from here onwards I get the string values
Now I don't know where to set the DTD basepath or baseurl. I need it asap.
Regards,
Naveen.The version which I'm working on is 10.2.0.4.
XML File---
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE MobileInventoryResponse SYSTEM "MobileInventoryResponse.dtd">
<MobileInventoryResponse>
<message>
<message-header>
<message-id>16244182</message-id>
<transaction-name>ship-advice</transaction-name>
<partner-name>cbeyond</partner-name>
<source-url>http://www.brightpoint.com</source-url>
<create-timestamp>20080826150709</create-timestamp>
<response-request>1</response-request>
</message-header>
<ship-advice>
<header>
<customer-id>297859</customer-id>
<shipment-information>
<ship-first-name>RA_13Aug_1</ship-first-name>
<ship-last-name>MIND</ship-last-name>
<ship-address1>test</ship-address1>
<ship-city>test</ship-city>
<ship-state>VA</ship-state>
<ship-post-code>22102-4931</ship-post-code>
<ship-country-code>US</ship-country-code>
<ship-phone1>0040726335068</ship-phone1>
<ship-email>[email protected]</ship-email>
<ship-via>FX01</ship-via>
<ship-request-date>20080826</ship-request-date>
<ship-request-warehouse>CBY1</ship-request-warehouse>
</shipment-information>
<purchase-order-information>
<purchase-order-number>380928</purchase-order-number>
<account-description />
<purchase-order-amount>0.0</purchase-order-amount>
<currency-code>USD</currency-code>
</purchase-order-information>
<order-header>
<customer-order-number>0002759</customer-order-number>
<customer-order-date>20080826</customer-order-date>
<order-sub-total>19.0</order-sub-total>
<order-discount>0.0</order-discount>
<order-tax1>0.0</order-tax1>
<order-tax2>0.0</order-tax2>
<order-tax3>0.0</order-tax3>
<order-shipment-charge>18.0</order-shipment-charge>
<order-total-net>0.0</order-total-net>
<order-status>Completed</order-status>
<order-type />
<brightpoint-order-number>35028788</brightpoint-order-number>
<warehouse-id>CBY1</warehouse-id>
<ship-date>20080826</ship-date>
</order-header>
</header>
<detail>
<line-item>
<line-no>1</line-no>
<item-code>SKU1</item-code>
<universal-product-code>0</universal-product-code>
<ship-quantity>1.0</ship-quantity>
<unit-of-measure>EA</unit-of-measure>
<serial-list>
<serial-numbers>
<esn>TIMI000013</esn>
</serial-numbers>
</serial-list>
<line-status />
<base-price>0.0</base-price>
<line-discount>0.0</line-discount>
<line-tax1>0.0</line-tax1>
<line-tax2>0.0</line-tax2>
<line-tax3>0.0</line-tax3>
<bill-of-lading>929406733828</bill-of-lading>
<scac>FX01</scac>
</line-item>
</detail>
</ship-advice>
<transactionInfo>
<eventID>16244182</eventID>
</transactionInfo>
</message>
</MobileInventoryResponse>
XML FILE END--------------------
MY PROGRAM IS AS BELOW---
get_eai_data_prc( x_ret_code OUT NUMBER
,p_debug_flag IN VARCHAR2
IS
--Local Variables
l_xml_parser xmlparser.Parser;
l_xml_doc xmldom.DOMDocument;
l_xml_data CLOB;
l_nodelist xmldom.DOMNodeList;
l_length NUMBER := 0;
l_num_cnt NUMBER := 0;
l_node xmldom.DOMNode;
l_docelem DBMS_XMLDOM.DOMElement; -- XML DOM element.
l_nodeValue VARCHAR2(30); -- Text value of the node.
l_nodename VARCHAR2(100);
l_po_num VARCHAR2(150);
l_account_desc VARCHAR2(150);
l_cust_ord VARCHAR2(150);
l_ship_date VARCHAR2(150);
l_item_code VARCHAR2(150);
l_ship_qty VARCHAR2(150);
l_esn VARCHAR2(150);
l_cust_channel_type VARCHAR2(150);
l_cust_grp_acct VARCHAR2(150);
l_max_doc_id NUMBER;
l_doc_id NUMBER;
l_market_id VARCHAR2(150);
l_record_id VARCHAR2(30);
TYPE l_esn_table IS TABLE OF VARCHAR2(30)
INDEX BY BINARY_INTEGER;
l_data l_esn_table;
--CURSOR TO GET XML DATA FROM EAI
CURSOR cur_xml_data(p_doc_id VARCHAR2)
IS
SELECT id
,document l_xml_data
FROM tds_xml_store_temp
WHERE id >= id ;
BEGIN
FOR rec_xml_data IN cur_xml_data(l_max_doc_id)
LOOP
l_doc_id := rec_xml_data.id;
l_xml_parser := xmlparser.newParser;
xmlparser.setValidationMode(l_xml_parser, FALSE);
xmlparser.parseCLOB(l_xml_parser,rec_xml_data.l_xml_data);
l_xml_doc := xmlparser.getDocument(l_xml_parser);
xmlparser.freeParser(l_xml_parser);
l_nodelist := xmldom.getElementsByTagName(l_xml_doc, '*');
l_length := xmldom.getLength(l_nodelist);
-- loop through elements
FOR l_rec_xml in 0..l_length-1
LOOP
l_node := xmldom.item(l_nodelist, l_rec_xml);
-- dbms_output.put(xmldom.getNodeName(n));
-- get the text node associated with the element node
l_nodename:=xmldom.getNodeName(l_node);
l_node := xmldom.getFirstChild(l_node);
IF (xmldom.isNull(l_node) = false) THEN
IF xmldom.getNodeType(l_node) = xmldom.TEXT_NODE THEN
IF l_nodename = 'purchase-order-number' THEN
l_po_num:=NULL;
l_po_num:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Purchaser Order Num : '||l_po_num);
END IF;--purchase-order-number
IF l_nodename = 'account-description' THEN
l_account_desc :=NULL;
l_account_desc := xmldom.getNodeValue(l_node);
END IF;
IF l_nodename = 'customer-channel-type' THEN
l_cust_channel_type:=NULL;
l_cust_channel_type:= xmldom.getNodeValue(l_node);
END IF;
IF l_nodename = 'customer-group-account' THEN
l_cust_grp_acct := NULL;
l_cust_grp_acct := xmldom.getNodeValue(l_node);
END IF;
IF l_nodename = 'customer-order-number' THEN
l_cust_ord:=NULL;
l_cust_ord:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Customer Order NUm : '||l_cust_ord);
END IF;--customer-order-number
IF l_nodename = 'ship-date' THEN
l_ship_date:=NULL;
l_ship_date:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Ship Date : '||to_date(l_ship_date,'YYYY-mm-dd'));
END IF;--ship-date
IF l_nodename = 'item-code' THEN
l_item_code:=NULL;
l_item_code:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Item Code : '||l_item_code);
END IF;--item-code
IF l_nodename = 'esn' THEN
l_esn:=NULL;
l_num_cnt := l_num_cnt + 1;
l_esn:=xmldom.getNodeValue(l_node);
l_data(l_num_cnt) := l_esn;
-- dbms_output.put_line('Serial Num : '||l_esn);
END IF;--esn
IF l_nodename = 'market-id' THEN
l_market_id := NULL;
l_market_id := xmldom.getNodeValue(l_node);
END IF;
IF l_nodename = 'ship-quantity' THEN
l_ship_qty:=NULL;
l_ship_qty:= xmldom.getNodeValue(l_node);
-- dbms_output.put_line('Ship Quantity : '||l_ship_qty);
END IF;--ship-quantity
END IF;--xmldom.TEXT_NODE
END IF;
END LOOP;--l_rec_xml
FOR j in l_data.first..l_data.last
LOOP
INSERT INTO cbey_shipment_int_stg( purchase_order_number
,account_description
,customer_order_number
,ship_date
,item_code
,ship_quantity
,esn
,customer_channel_type
,customer_group_account
,market_id
,eai_xml_doc_id
,record_status
,record_id
VALUES
( l_po_num
,l_account_desc
,l_cust_ord
,to_date(l_ship_date,'YYYY-mm-dd')
,l_item_code
,l_ship_qty
,l_data(j)
,l_cust_channel_type
,l_cust_grp_acct
,l_market_id
,l_max_doc_id
,'NEW'
,CBEY_RECORD_ID_SEQ_S.nextval
END LOOP;--j
UPDATE cbey_interface_run_log
SET request_id = l_conc_req_id
,lastrun_date = SYSDATE
,doc_id = rec_xml_data.id
WHERE program_id = 'SHIPMENT_INT'
AND doc_id =l_max_doc_id;
l_data.delete;
l_num_cnt :=0;
END LOOP; --rec_xml_data
COMMIT;
END of the Procedure--------------------------
Now if I load the xml file without the this :- <!DOCTYPE MobileInventoryResponse SYSTEM "MobileInventoryResponse.dtd">
it works well. But it gives error when this particular thing is there.
Regards,
Naveen
Edited by: MAN on Oct 17, 2008 7:28 AM -
SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
please help I have to update my clients site tonight I have been using muse subscription since Nov 19, 2012 An unexpected error occurred.An unexpected error occurred processing your request. Please try again later.I-2
Hi Carey,
Please refer to this trouble-shooting guide for the error that you are getting, An unexpected error occurred I -200
- Abhishek Maurya -
that is...
index.html - error occurred - An FTP error occurred - cannot put index.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
index.html
thanks!It's under More Options triangle in the Manage Sites panel. See screenshot:
Nancy O. -
Infoview: An error has occurred: An unknown error has occurred.
I am using BO XI r2 and getting the following error in Infoview: "An error has occurred: An unknown error has occurred." Really tells me nothing. I have been searching for clues all day. Anyone ever have this issue and have some idea where to look?
thanks,
CarmellaHello Carmella,
a good way to start troubleshooting those problems are :
- See if all servers in the CCM are running and enabled
- See if you can access the reports in the CMC
- See the event log file of the OS for any BOE server error
- See the log files in the logging folder
..\business objects\business objects enterprise 115\logging
Best regards
Falk -
A VoiceXML error occurred of type "error.badfetch"
Hello,
I have a CVP application that contains a Form Element. This application is deployed 2 CVP Call/VXML servers which are redundant.
In the Application Error Log of only sideA, I can see the error: A VoiceXML error occurred of type "error.badfetch"
This error is occurring for some callers on sideA and not happening at all for any caller on sideB.
Related error in C:\Cisco\CVP\ is the following:
6189849: <CVP Server1>: Jan 26 2012 11:05:21.539 +0200: %CVP_8_0_IVR-3-CALL_ERROR: RunScript Error from <VoiceGateway1> [CVP_BAD_FETCH(45)] CALLGUID: 19428EB5100001353BFF9E7D53EF37A5 DNIS=85555555554392 {VRUScriptName: 'GS,Server,V' ConfigParam: ''} [id:3023]
6191737: <CVP Server1>: Jan 26 2012 11:09:58.978 +0200: %CVP_8_0_IVR-3-CALL_ERROR: CALLGUID=194607821000013569E997F353EF37A5 DNIS=85555555554602 CVP VXML Server encountered a Bad-Fetch Error - URL:
http://<CVP Server1>:7000/CVP/en-us/../Server?_dnis=03800111&_ani=<CustomerNumber>&callid=194607821000013569E997F353EF37A5&CVP_Call_ID=<CustomerNumber>&mediaServer=<CVP_Server1>&application=<CVPapplication>
(Client: <VoiceGateway1>) [id:3023]
The audio prompts related to this Form Element are all in their correct locations and also loaded in both Voice Gateway's cache.
I have tried to restart the CVP Call/VXML server but this did not solve the problem.
Any suggestion is highly appreciated.
Thanks,
Justine.Hi Justine,
Thanks for your reply.
In fact, in my case and since I have an upgraded CVP CALL/VXML server from 4.1 to 8.0, i had to transfer the new "GW Download.tar" file to the VXML gateways' flash using CLI command : archive tar /xtract tftp:///GW_Downloads.tar /
Then, I had to load files into IOS memory for each CVP service on the VXML Gateways suing the following CLI commands:
call application voice load cvperror
call application voice load cvp-survivability
call application voice load new-call
call application voice load ringtone
call application voice load bootstrap
call application voice load handoff
Thanks again.
Regards.
Wajih. -
Occurs "AD Administration error" when i update snapshot
ours is upgraded to EBS R12.0.6.
then,apply patch 7665691 and 7533081.all above is successful!
next ,when i execute "adadmin" -->2.Maintain Applications Files menu-->4.Maintain snapshot information-->2.Update current view snapshot-->1.Update Complete APPL_TOP
after running about 8 minutes,the errors occurs like this below:
==========================
AD Administration error:
Error while executing statement
AD Administration error:
ORA-00600: internal error code, arguments: [kdddgb5], [4294967295], [0], [], [], [], [], []
ORA-06512: at "APPS.AD_FILE_UTIL", line 1357
ORA-06512: at line 3
==========
can somebody help me ? i can't resolve the problem
Edited by: user515977 on Apr 26, 2009 10:25 PM
Edited by: user515977 on Apr 26, 2009 10:27 PM
Edited by: user515977 on Apr 26, 2009 10:27 PMHi,
Have a look at the following document.
Note: 153788.1 - Troubleshoot an ORA-600 or ORA-7445 Error Using the Error Lookup Tool
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=153788.1
If this does not help, please log a SR.
Regards,
Hussein -
When I try to launch Adobe Photoshop, an error occurs that says, Error: 1
When I try to launch Adobe Photoshop an error occurs that says: Contact Adobe Support - Error: 1
Elaine1984 for information on how to resolve Download Error 205 please see Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
When compiling "virtual public" occur an runtime error.
the test code:
#include <iostream>
class A
public:
A(){};
virtual ~A(){};
public:
virtual int AddRef()
return 0;
protected:
int _nID; //-- 1
class B : virtual public A //-- 2
public:
B(){};
virtual ~B(){};
class C : virtual public B
public:
C(){};
virtual ~C(){};
virtual int AddRef(){
return 1;
int main()
std::cout << " now main function runing" << std::endl;
A *p = new C;
p->AddRef(); //-- 3
std::cout << "main function run end" << std::endl;
return 0;
when use compiled options:
"$(FLASCC)/usr/bin/g++" $(BASE_CFLAGS) -g -O0 c.cpp \
-emit-swf -swf-size=800x600 -lAS3++ -lFlash++ -pthread -swf-version=18 -o c_1.swf
this program will stopped at p->AddRef(); (note 3)
but use compiled flag:
"$(FLASCC)/usr/bin/g++" $(BASE_CFLAGS) -O4 c.cpp \
-flto-api=exports.txt -emit-swf -swf-size=800x600 -lAS3++ -lFlash++ -pthread -swf-version=18 -o c.swf
this program work fine.
when I delete code: int _nID; (note 1) in class A or change code: class B : virtual public A to class B : public A. (note 2)
this porgram also work fine.
is this a bug?I see nothing Flash specific in your source code. Try compiling this with a native g++ toolchain to see if the problem reproduces there as well.
Maybe you are looking for
-
What are the main business objects in CRM 2007 and how does this module interact with other SAP modules?
-
Returning a sys_refcursor for XML data in a function
As I typically write my queries in packages, and return sys_refcursor's to return data into a .NET DataSet via the OracleDataAdapter, I would like to know if it is possible to return the data using the OracleCommand.ExecuteXmlReader method to return
-
EJBs and web services in Application server ??
Hi all, I just wanted to ask for a help in a scenario that i am facing: I have a Application that relies on EJBs for Business Logic I basically use the Jboss A/s[4.2.2 GA] server for the same and now there is a need to Expose these bean methods throu
-
I need a print magnifier app??
I folks Just got an ipod touch but need some kind of app that will magnify the print on newspaper apps. Any suggestions? Thanks, Pat
-
I have App Store 1.0. MacUpdate Desktop tells me there is a new version 1.0.1. How do I update App Store. Mac Update only takes me directly to App Store. Not much help in that, as I don't find how to update the App Store itself. Regards Guttorm Kitte