When I boot my early 2011 macbook pro it is now very slow and pull us the (Command R) window... Pictures Included.

I took my Early 2011 MacBook Pro into the local apple store and they ran their GPU test, and my Mac actually passed it.  The Apple employee then ran a hardware test and the logic board, battery, and optical drive showed problems.  The Genius told me about their flat rate $310 repair deal, and I am going to take advantage of it... 
Today when I am able to boot up my mac it loads very slow (showing a beachball during start up) and then the window we get when pressing Command R shows up asking me to press enter for English, and then after that it shows options like Disk Utility, Restore from Time Machine backup, Reinstall OS X, and Get online help options... 
I erased my drive (Crucial SSD) and restored from Time Machine backup, and I am still having this issue...  Please help.

Kappy hi, thanks again.  I wiped the drive, reinstalled OS X, and transferred from Time Machine backup...  Seems to be working better somewhat.  I will just have to pay for flat rate repair for Apple to fix everything wrong, and hopefully it will perform like new...  Again thank you.

Similar Messages

  • I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

    I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck. Please can someone help me with what it all means.
    Thanks in advance.
    EtreCheck version: 1.9.15 (52)
    Report generated 19 September 2014 08:07:14 GMT+8
    Hardware Information: ?
      MacBook Pro (13-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.3 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 0:4:29
    Disk Information: ?
      Hitachi HTS545032B9A302 disk0 : (320.07 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 319.21 GB (147 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-898 
    USB Information: ?
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.4 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.4 - SDK 10.5) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.4 - SDK 10.4) Support
      [loaded] com.sophos.kext.sav (9.1.55 - SDK 10.7) Support
      [loaded] com.sophos.nke.swi (9.1.50 - SDK 10.8) Support
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.sophos.autoupdate.plist Support
      [running] com.sophos.configuration.plist Support
      [running] com.sophos.intercheck.plist Support
      [running] com.sophos.notification.plist Support
      [running] com.sophos.scan.plist Support
      [running] com.sophos.sxld.plist Support
      [running] com.sophos.webd.plist Support
      [running] com.trusteer.rooks.rooksd.plist Support
    Launch Agents: ?
      [loaded] com.divx.dms.agent.plist Support
      [loaded] com.divx.update.agent.plist Support
      [running] com.sophos.uiserver.plist Support
      [running] com.trusteer.rapport.rapportd.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
      [running] com.amazon.music.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [not loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items: ?
      iTunesHelper
      TomTomHOMERunner
      AdobeResourceSynchronizer
      Dropbox
    Internet Plug-ins: ?
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivX Web Player: Version: 3.2.1.977 - SDK 10.6 Support
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      EPPEX Plugin: Version: 10.0 Support
      Default Browser: Version: 537 - SDK 10.9
      OVSHelper: Version: 1.1 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    Safari Extensions: ?
      Ultimate
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Perian  Support
      Trusteer Endpoint Protection  Support
    Time Machine: ?
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 297.29 GB Disk used: 160.38 GB
      Destinations:
      Data [Network] (Last used)
      Total size: 2 TB
      Total number of backups: 99
      Oldest backup: 2012-04-20 17:05:32 +0000
      Last backup: 2014-09-18 23:49:25 +0000
      Size of backup disk: Excellent
      Backup size 2 TB > (Disk size 297.29 GB X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          6% InterCheck
          5% iCalExternalSync
          3% WindowServer
          2% CalendarAgent
          2% SystemUIServer
    Top Processes by Memory: ?
      152 MB SophosScanD
      147 MB InterCheck
      106 MB SophosAntiVirus
      66 MB Dropbox
      57 MB com.apple.iTunesLibraryService
    Virtual Memory Information: ?
      161 MB Free RAM
      1.55 GB Active RAM
      1.41 GB Inactive RAM
      902 MB Wired RAM
      611 MB Page-ins
      0 B Page-outs

    Uninstall Trusteer software
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
    Remove Sophos
    https://discussions.apple.com/message/21069437#21069437

  • My Macbook Pro's speed is very slow and frustrating.

    My Macbook Pro is about 3 years old and has gotten incredibly slow. I have some movies, pictures, and a bunch of PDF files saved to it but it doesn't seem like that should slow the computer that much. What should I do to speed it up? Is a full Factory reset in order? And, if so, would that fix the issues I am having? Any suggestions are appreciated.

    A factory restore erases all your personal data on the disk and hopefully you have backed up everything to an external source just in case.
    Not enough free space on the disk can slow your Mac down.
    Control click your MacintoshHD icon on your desktop then click Get Info.
    You'll see:  Available and Capacity
    Make sure there's at least 15% free disk space.
    More tips here > Mac troubleshooting: What to do when your computer is too slow | Macworld

  • Boot Camp: Early 2011 MacBook Pro boots to black screen with blinking cursor after windows 7 installation.

    I bought and downloaded the windows 7 ultimate edition 64 bit iso, then proceeded to perform a correct burn to a DVD one at the slowest speed and one at the fastest. all went well. so I open Boot Camp assistant and follow the instructions to the letter, downloaded the driver support to the flash drive. partitioned my drive with more than enough room 150 gb. its starts its install. I get through everything seamlessly where I put in my info all with the exception of my activation code. yet it still continues to finalize the install and does another restart. boots back up to either A. black screen saying press any key to boot to my install disk. B. if I take it out just a white curser. also I read it may be because I had the flash drive in while I was trying to boot so I removed it as well, same result. any input would be much appreciated.

    Boot Camp- Windows installation boots to black screen with blinking cursor.

  • Re: I have an early 2011 MacBook Pro which has been running slow for a while. After looking at responses to similar problems I have downloaded and run EtreCheck and will post the output. Please can someone help me with what it all means.Thanks in advance

    I am having similar problems here is my etrecheck:
    EtreCheck version: 1.9.15 (52)
    Report generated September 18, 2014 10:54:44 PM EDT
    Hardware Information: ?
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2 cores
      4 GB RAM
    Video Information: ?
      Intel HD Graphics 4000 - VRAM: 512 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.8.5 (12F45) - Uptime: 0 days 4:57:11
    Disk Information: ?
      APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      disk0s1 (disk0s1) <not mounted>: 209.7 MB
      Macintosh HD (disk0s2) / [Startup]: 499.25 GB (472.13 GB free)
      Recovery HD (disk0s3) <not mounted>: 650 MB
      MATSHITADVD-R   UJ-8A8 
    USB Information: ?
      Apple Computer, Inc. IR Receiver
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ?
      Apple Inc. thunderbolt_bus
    Gatekeeper: ?
      Mac App Store and identified developers
    Problem System Launch Daemons: ?
      [failed] com.apple.coresymbolicationd.plist
    Problem System Launch Agents: ?
      [failed] com.apple.accountsd.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
    Launch Daemons: ?
      [failed] com.adobe.fpsaud.plist Support
      [running] com.fitbit.galileod.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.prosofteng.DriveGenius.locum.plist Support
    User Launch Agents: ?
      [loaded] com.google.keystone.agent.plist Support
      [running] com.prosofteng.DGMonitor.plist Support
      [running] com.spotify.webhelper.plist Support
    User Login Items: ?
      Spotify
      Fitbit Connect Menubar Helper
      Google Chrome
    Internet Plug-ins: ?
      Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.1
      JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
      SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
    Safari Extensions: ?
      Searchme
      Amazon Shopping Assistant
      Ebay Shopping Assistant
      Slick Savings
    Audio Plug-ins: ?
      AirPlay: Version: 1.7 - SDK 10.8
      iSightAudio: Version: 7.7.1 - SDK 10.8
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
    3rd Party Preference Panes: ?
      Flash Player  Support
    Time Machine: ?
      Time Machine not configured!
    Top Processes by CPU: ?
          17% mds
          5% Google Chrome
          2% Google Chrome Helper EH
          1% WindowServer
          0% ps
    Top Processes by Memory: ?
      209 MB Google Chrome Helper EH
      160 MB Google Chrome
      89 MB Google Chrome Helper
      63 MB mds
      57 MB Dock
    Virtual Memory Information: ?
      301 MB Free RAM
      1.87 GB Active RAM
      640 MB Inactive RAM
      1.21 GB Wired RAM
      2.95 GB Page-ins
      52 KB Page-outs

    Here are some of the results from console:
    9/19/14 11:12:45.808 AM UserEventAgent[11]: Captive: en1: Not probing 'busecure' (protected network)
    9/19/14 11:12:45.811 AM configd[16]: network changed: v4(en1!:149.125.79.239) DNS Proxy SMB
    9/19/14 11:12:46.168 AM netbiosd[233]: name servers down?
    9/19/14 11:31:11.536 AM spindump[937]: Google Chrome [285] timed out, and it's responsive
    9/19/14 11:33:30.000 AM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=946[GoogleSoftwareUp] clearing CS_VALID
    9/19/14 11:47:00.954 AM mdwrite[962]: [ERROR] [0.000s] com.apple. UBItemStatusNotification.c:805 _do_UBItemStatusNotificationRegisterURLs() can't find realpath for "/Users/paolocuyno/Library/Mobile Documents/com~apple~system~spotlight/mdlabels", was blocked at "/Users/paolocuyno/Library/Mobile Documents": 2 (No such file or directory)
    9/19/14 11:47:00.955 AM mdwrite[962]: [ERROR] [0.001s] com.apple. UBItemStatusNotification.c:805 _do_UBItemStatusNotificationRegisterURLs() can't find realpath for "/Users/paolocuyno/Library/Mobile Documents/com~apple~system~spotlight/mdlabels", was blocked at "/Users/paolocuyno/Library/Mobile Documents": 2 (No such file or directory)
    9/19/14 11:47:43.656 AM WindowServer[89]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    9/19/14 11:47:57.656 AM WindowServer[89]: disable_update_likely_unbalanced: UI updates still disabled by application "Finder" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
    9/19/14 11:48:10.259 AM WindowServer[89]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 27.60 seconds (server forcibly re-enabled them after 1.00 seconds)
    9/19/14 11:48:33.043 AM coreaudiod[139]: Disabled automatic stack shots because audio IO is active
    9/19/14 11:48:33.049 AM coreaudiod[139]: Enabled automatic stack shots because audio IO is inactive
    9/19/14 11:49:36.887 AM WindowServer[89]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    9/19/14 11:49:47.244 AM WindowServer[89]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 11.36 seconds (server forcibly re-enabled them after 1.00 seconds)
    9/19/14 11:50:23.926 AM WindowServer[89]: CGXDisableUpdate: UI updates were forcibly disabled by application "Finder" for over 1.00 seconds. Server has re-enabled them.
    9/19/14 11:50:37.713 AM WindowServer[89]: reenable_update_for_connection: UI updates were finally reenabled by application "Finder" after 14.79 seconds (server forcibly re-enabled them after 1.00 seconds)
    9/19/14 12:29:26.072 PM com.apple.launchd.peruser.501[149]: (com.apple.printtool.agent[557]) Exited: Killed: 9
    9/19/14 12:29:26.000 PM kernel[0]: memorystatus_thread: idle exiting pid 557 [printtool]
    9/19/14 12:30:25.000 PM kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
    9/19/14 12:30:26.000 PM kernel[0]: macx_swapon SUCCESS
    9/19/14 12:32:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1006[GoogleSoftwareUp] clearing CS_VALID
    9/19/14 12:33:06.523 PM spindump[1007]: Google Chrome [285] timed out, and it's responsive
    9/19/14 12:34:18.901 PM coreaudiod[139]: Disabled automatic stack shots because audio IO is active
    9/19/14 12:34:22.799 PM coreaudiod[139]: Enabled automatic stack shots because audio IO is inactive

  • My MacBook Pro is always running very slow and freezes up at least once a day, please help!!!!

    Over the last 6 months my Macbook pro is running slow and freezes up a lot, I've done a check with EtreCheck, report below.
    If anyone can offer some advice I would be very grateful, cheers....
    Problem description:
    Consistently slow running of all programs and freezes up for 2/3 mins
    EtreCheck version: 2.0.11 (98)
    Report generated 16 November 2014 00:35:40 GMT
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 9 days 23:20:46
    Disk Information: ℹ️
      APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 498.88 GB (318.43 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.cmfsyncagent.plist
      [failed] com.apple.EscrowSecurityAlert.plist
      [failed] com.apple.gamed.plist
      [failed] com.apple.sbd.plist
      [failed] com.apple.spindump_agent.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.AirPlayXPCHelper.plist
      [failed] com.apple.AssetCacheLocatorService.plist
      [failed] com.apple.awdd.plist
      [failed] com.apple.corestorage.corestoragehelperd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-daily.plist
      [failed] com.apple.periodic-weekly.plist
      [failed] com.apple.softwareupdate_download_service.plist
      [failed] com.apple.wdhelper.plist
      [failed] com.apple.xpc.smd.plist
    Launch Agents: ℹ️
      [running] com.epson.eventmanager.agent.plist Support
      [loaded] com.epson.ews.launcher.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
    User Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      SharePointBrowserPlugin: Version: 14.0.0 Support
      Silverlight: Version: 4.1.10329.0 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 7.1 Support
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
    Time Machine: ℹ️
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 180.44 GB
      Destinations:
      Seagate Backup Plus Drive [Local]
      Total size: 999.53 GB
      Total number of backups: 7
      Oldest backup: 2013-12-06 12:44:36 +0000
      Last backup: 2014-11-03 17:58:25 +0000
      Size of backup disk: Adequate
      Backup size 999.53 GB > (Disk used 180.44 GB X 3)
    Top Processes by CPU: ℹ️
          5% WindowServer
          1% EEventManager
          0% fontd
          0% configd
          0% AppleSpell
    Top Processes by Memory: ℹ️
      137 MB com.apple.WebKit.WebContent
      116 MB Safari
      47 MB sandboxd
      47 MB WindowServer
      43 MB Finder
    Virtual Memory Information: ℹ️
      913 MB Free RAM
      1.43 GB Active RAM
      635 MB Inactive RAM
      933 MB Wired RAM
      36.97 GB Page-ins
      2.13 GB Page-outs

    You may wish to read about maintenance and upkeep of the OS X, plus other
    information, across several topics in this site with topics divided into Guides:
    •Tech Guides - TheSafeMac:
    http://www.thesafemac.com/tech-guides/
    Sometimes, items may have been inadvertently downloaded by accident or due
    to poor advisement, and of those some can be a cause of slowness in Mac OS X.
    Also, the use of scanning antivirus software can be a cause of slow and disruptive
    system issues; since antivirus for the most part is not effective due to the nature of
    the Mac OS X and the inability of an AV application to have records of unknown, &
    unsubstantiated or rumored issues in the wild, since few or none are known to exist.
    The note in the etrecheck report of excessive Page Outs, implies directly that the
    computer may need to have more RAM installed; a matching pair of higher capacity
    correct spec RAM chips, could be purchased from a reputable source & installed.
    As much as, perhaps 16GB in a RAM upgrade, depending on the MacBook build.
    All of those red-lettered items in the report that did not load, appear to be system
    parts; perhaps that may be something to investigate. Not sure why that is...
    {Because today is part of a weekend, I'd suspect the time of day and weekday are
    both behind the lack of an earlier reply to your post here. Also, if there have been
    weather or other disruptions in the lives of those volunteers who offer help, then
    maybe they've had to modify their plans around such events. Or power outages.
    We had one here for more than an hour, and everything went out. Even phones.}
    So hopefully some other knowledgable readers may contribute ideas on how to
    resolve the issues; troubleshooting may be helpful, and to read through sections
    of TheSafeMac to see if there is any malware, adware, or other odd activity that
    may point to a cause; removal suggestions for those are in that site. Also, if you
    had visited any torrent or sharing sites, or downloaded free yet contaminated items
    from software download sites, they could also affect your computer. There are
    a few areas in that web site worth reading through.
    In any event...
    Good luck & happy computing!

  • Is there any way to make a snow leopard partition on an early 2011 MacBook Pro that was upgraded to Lion, without the original boot disk?

    So I have an early 2011 MacBook pro,  I believe it shipped with snow leopard originally, as I purchased and upgraded to Lion fairly early on.  I am trying to make a partition right now and have it run snow leopard so I can use programs that have PowerPC.
    I should note, I replaced both the RAM and the harddrive in my Macbook pro.  I changed from 4 GB of ram (that came shipped) to 8 GB of ram from a 3rd party, that I installed on my own months ago, have registered in the computer and have been working fine for quite some time now.
    Also I should note I replaced my harddrive.  I went from what ever the standard 500 GB harddrive that shipped with 15 inch early 2011 MB pro's.  I now have a 3rd party SSD that's 240GB's that I also installed on my own, (at the same time as the RAM---Black friday items)  The harddrive has been working just fine since then.
    In installing the harddrive I borrowed a friends external harddrive and used a program called carbon copy cloner to get everything over to the SSD.
    Now here is my issue.  I have ordered the Snow Leopard (10.6.3) install disks from apple, I have created a partition on my SSD for snow leopard, but when I try to select the install disc for snow leopard at boot I get three beeps.
    I know this issue has been posted elsewere but it said answered and the answer is no longer available.  I also am unsure if any of the RAM or Harddrive swapping could have been causing the issue.  I have the old harddrive and RAM still, but unfortunatley have no external harddrive anymore or money to afford one.
    Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks).
    Let me know If there is anything I can do.  I'm a now broke college student so i'd like to spend as little $$$$ as possible
    *PS I should also note the DVD drive is working fine, it reads the disk, the disk is brand new, it plays DVD's fine and has never had any issues in the years i've used it for similar tasks*
    sorry for the long drawn out post, I just wanted to include as much as possible from what I've seen other people have issues with

    BrettGoudy wrote:
    ...Is there any way I can install a partition that runs snow leopard on my early 2011 MB pro with what I have (new SSD, New RAM, Current version Lion running, no external drive, lack of original snow leopard disks [I lost them ] and the general 10.6.3 snow leopard boot disks)...
    As the last post suggests, call Apple and order a replacement original disc for about $17.  They will ask you the model and serial numbers.
    Your retail version of Snow Leopard OS 10.6.3 will not work on that Mac as it requires a minimum of OS X 10.6.7 to boot and operate.
    Another alternative is to again borrow another Mac to install your retail Snow Leopard into an external HD or partition, upgrade it to 10.6.8 and then clone it back to a partition on your MBP.

  • HT2845 can't get my apple magic mouse to work on my boot camp on my early 2011 macbook pro with latest Marveric OS

    I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,

    Not sure if this will help anyone, but I had trouble installing on 10.8.
    I then found this particular support page:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
    Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
    I use the printer through usb but my wife uses wireless from her PC laptop.
    Andre Francis

  • Early 2011 Macbook Pro shuts off when charger unplugged.  Worked fine yesterday.

    Hi,
    I have an early 2011 Macbook Pro, which I purchased brand new; it's just over one year old.  Yesterday the laptop held a charge no problem for 6 hours or more.  Today, when I disconnect it from the charger it goes to sleep.  When I plug it back in and press the power button it wakes up, and I can use it.
    This cannot be a battery issue, since it was holding a charge without trouble yesterday.  Does this appear to be a serious issue?  My one year warranty expired 2 months ago yesterday, and I had forgot to purchase AppleCare.  Sigh.  It almost seems like surgically-planned obsolecense or punishment for not purchasing AppleCare.
    I would immensely appreciate any help/suggestions on this.
    Thanks.

    OK, in that case:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Mac OS X 10.6.8 Update Combo v1.1.
    Upgrading to Lion or Mountain Lion will not solve the problem.

  • My early 2011 MacBook Pro 15" non-glare display has developed a dark band at the edges of the screen approximately the same width as the aluminum surround. This wasn't present when the MBP was new. Am near an Apple Store, but anyone else had this problem

    My early 2011 MacBook Pro 15" non-glare display has developed a dark band at the edges of the screen approximately the same width as the aluminum surround. This wasn't present when the MBP was new. I'm near an Apple Store and can take the laptop in, but has anyone else had this problem?

    Thanks for your input. I didn't completely flesh out what I'm seeing visually. The resolution settings are all correct for my screen. The problem is if, say, looking at the gray startup screens or a completely white full-screen image, there is a perimeter of graying, almost as if the LEDs are somehow not as bright as the rest. It's also curious that the thickness of this phenomenon is almost exactly the same as the metal bezel around the display. I will be taking it to an Apple Store for a look, as I'm also having several minor hardware problems that need to be addressed and remedied.

  • How to downgrade from OSX 10.8.5 to Snow Leopard, on an Early 2011 MacBook Pro, without the original installer disk?

    Hello! So here are the specs.
    I have an Early 2011 MacBook Pro, which came with OSX 10.6.6 by default.
    I've lost my installer disk so I though I'd buy a retail one from the online Apple Store, and version 10.6.3 is what they sent me.
    Simply running the install OSX app won't work, I get a msg saying:
    -- You can't use this version of the application "Install Mac OS X" with this version of OS X. You have "Install Mac OS X" 23.1.1. --
    So, I've tried booting from the new disk hoping to erase my current drive and install Snow Leopard, but no can do, I get 3 beeps and have to force shutdown (not RAM related, see below). Laptop works fine when I spare it this maneuver.
    After some research I understand 2 things:
    1. Only the original installer disk will let me restore factory settings (and I don't have it).
    2. I can only install the default OSX (10.6.6) or a later version (that 10.6.3 DVD may not have the correct drivers for my system).
    Are these conclusions right? If so, would the Apple Store replace my disk for an updated 10.6.6. one? If not, then what are my options?
    Thank you!
    References:
    http://manuals.info.apple.com/MANUALS/1000/MA1172/en_US/Snow_Leopard_Installatio n_Instructions.pdf
    http://support.apple.com/kb/HT3910
    http://support.apple.com/kb/ht2186
    https://discussions.apple.com/message/19444837#19444837
    https://discussions.apple.com/message/18085179#18085179
    http://forums.macrumors.com/showthread.php?t=1163160

    Phone AppleCare and order the computer's original disks.
    (92307)

  • Early 2011 MacBook Pro shutting off all by itself

    Early 2011 MacBook Pro 11" shutting off all by itself recently.
    I had the logic board replaced 11 months ago because it started to shut off more and more until it refused to boot up again.
    Now I am going through the same problem. Is this common?

    OK, in that case:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Mac OS X 10.6.8 Update Combo v1.1.
    Upgrading to Lion or Mountain Lion will not solve the problem.

  • Problems with early 2011 MacBook Pro 13" 2.7 GHz / OWC Mercury Extreme Pro

    *Has anyone else experienced issues getting their OWC Mercury Extreme Pro SSD working in the early 2011 MacBook Pros?*
    I am having difficulties getting OS X installed on the new OWC Mercury Extreme Pro 240 GB. When I install the SSD in place of the factory HDD and boot from the 10.6.6 reinstallation DVD the SSD is not visible to the installation program. If I quit the 10.6.6 installer and run Disk Utility (from the 10.6.6 installation DVD) the SSD is not visible. If I quit Disk Utility and run System Profiler (from the 10.6.6. installation DVD) the drive is visible and firmware and serial numbers are displayed. So like the drive is visible to OS X but the installer / Disk Utility can not see it.
    If I put the SSD in an external USB enclosure it is visible - I can format the drive and copy files to it.
    I also tried installing the SSD in place of the factory HDD, putting the HDD in a USB enclosure, booting from the OS X installation on the HDD and running the OS X installer from the 10.6.6 DVD. I was able to select the SSD as the target for the installation and the initial file copy was OK, but when the laptop restarted during the installation the SSD would not boot. The grey folder icon with the flashing question mark was displayed instead. Holding down Option while booting only gave me the option to boot from the DVD.
    I also tried resetting the NVRAM and SMC of the MacBook Pro - this did not resolve the issue.
    I spoke to OWC support who said they did not know of any compatibility issues with the new MacBook Pros and suggested I request a replacement.
    The firmware version of the SSD is 350a13f0

    This is my exact problem. I have had 2 of these drives so far and both of them have had the same problem with installation internally. The first one I was able to get operational using the method you described, ie: put the OWC SSD in an external case (FW800 was my choice) and install it there. But I encountered the sleep issues, so I sent it back for a replacement.
    The second drive I was finally able to install using the second method, but now the computer regularly locks up. So I'm going to call again and hopefully the third try will work.
    Just to clarify. The first drive had sleep issues, but had the older firmware. The second drive had the newer firmware (360 I think it is) and didn't have the sleep issues, but locks up while running.
    I'm so irritated on how many hours I've spent on this issue. And their support department, though very nice, wasn't helpful at all. It's as if they never heard of this problem.

  • How can I connect my Early 2011" Macbook Pro 13" inch, with a generic Mini Display Port to HDMI connector, to a LG 32LD340 LCD TV, using Mountain Lion 10.8.2?

    I have an Early 2011" macbook pro 13 inch (core i5 2.3ghz 4gb ram 320hdd) with Mountain Lion 10.8.2, and I want to connect it via Mini DP to HDMI connector, and a HDMI cable to a LCD TV LG 32LD340. When I had Lion OS, I had no problems at all.

    If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.

  • Airplay mirroring on early 2011 macbook pro not mirroring

    First, here's what I have:
    Early 2011 macbook pro (identifier 8,3) with 2.2 Intel Core i7 processor connected over Wifi on 2.4 Ghz channel.
    OSX 10.8 Mountain Lion
    Apple TV 3 (fully up to date)
    The stats I've read say airplay mirroring should work fine.  I can connect both machines just fine. I can stream movies just fine. I can send music just fine.  I just cannot mirror my desktop.  I have the icons, a connection is made, but all that shows is a blank screen. I've adjusted the resolutions with no luck.  I've shut down and rebooted both machines with no luck...
    Any solutions or do I have to count my losses with Apple Airplay and spend more money on a 3rd party alternative (AirParrot)?

    Hi eoinodonnell,
    The problem was resolved, but I have the worst answer... it just started working, and has remained reliable since.  I never found out exactly what fixed it, but I would try these things:
    1) Try a factory reset on the Apple TV, and make sure your Macbook pro has all the latest updates.
    2) Try to repair disk permissions (better to do it from disk utility from boot menu) and reboot your macbook.
    3) Backup your files and do a fresh install of OSX.
    I know I performed all these tasks, and possibly more, but something along the way did fix the problem. 
    I hope something here works!  If so, please let me know what did it.

Maybe you are looking for

  • Deletion of master data with / without SID

    Hi Experts, Client have requested for master data clean up. Requirement: "Several masterdata tables in Production system contain wrong entries. These entries should be cleaned up. The attached Excel contains the keys of the entries to be deleted" Ste

  • Elements 9: activate a third laptop when there is no possibility to deactivate the others

    Hi, I have activated Elements 9 on 2 macs already, but one of them is not working anymore, the motherboard got fried, hence i threw the laptop away. I bought a new one, and now i cannot activate Elements until I deactivate the other one. What should

  • Reinstalling Acrobat 9 Pro

    The updater 942 tells me that it could not be applied because the original Adobe Acrobat applications contents were modified since the original installation. It told me to reinstall the application. Error: 1301 When I tried to reinstall I got as far

  • Import declaration for customer returns

    Hi! Does anybody know how to create import customs declaration for customer returns (return sales order --> return delivery --> GI for returns) in GTS? Standard GTS can handle only the PO --> inbound delivery --> GR process, as if this would be the O

  • PS CS6 upgrade mac, install error

    Hello, I just received the upgrade to PS CS6 for Mac.  I currently have PS CS3. I tried installing, but the installer aborts about 2% into the installation process.  when I click on the error description I get this: Exit Code: 22 Please see specific