When I bought my MacBook Pro, I didn't buy the AppleCare PP with it. Now, is it possible for me to buy it separately to cover my MacBook?

When I bought my MacBook Pro from Apple online store, I didn't buy the AppleCare Protection Plan with it. Now I'm in a different country from where I've bought my MacBook Pro. Is it possible for me to buy AppleCare Protection Plan separately to cover my MacBook?

You should be able to do this if your MBP is still under the original warranty, i.e., under a year old, but it may vary depending on the region where you are. See: http://www.apple.com/legal/sales-support/applecare/appgeos.html

Similar Messages

  • HT4718 i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

    i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

    First of all, I have to ask, why to you "need" to install a fresh copy of OSX?
    This may mean that your hard drive is failing, so hopefully you have a backup.
    I'm assuming you were in your recovery partition when you did this.
    I would, from the recovery partition, repair your hard drive and permissions.
    When to Run First Aid in Mountain Lion's Disk Utility - For Dummies
    And then try to create the partition again.
    If that doesn't work, you have a few options:
    Try a third party utility like DiskWarrior or TechTool which may be able to repair your hard drive:
    DiskWarrior 4 - The Disk Utility for Mac Disk Repair, Mac Directory Repair, Mac Disk Recovery, Mac Data Recovery or Techtool Pro 7
    Try internet recovery, perhaps erase the entire hard drive and reinstall ML.
    If nothing else works, then I'd replace the HD and start over.

  • My macbook pro will not get past the gray screen with the apple logo and a loading bar.

    My macbook pro will not get past the grey screen with the apple logo after attempting to load for hours.  I have already tried resetting the NVRAM/PRAM and a couple other tricks and no luck.  Anyone out there have suggestions for my problem? Help would be much appreciated since i use my computer for everything at school and i am in desperate need to get this baby working again.

    You didn't say which OS in your tag, but maybe you might find something here.
    http://support.apple.com/kb/TS2570
    http://support.apple.com/kb/PH4191
    http://support.apple.com/kb/PH7213
    http://support.apple.com/kb/HT4125
    http://support.apple.com/kb/HT2213

  • I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty?

    I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty? I want to know if the 3 year extended warranty covers what damage. Like water damage, accidental damage, lost or stolen macbook, manufactory defects, or any other kind of damage, maybe be even cosmetic damage. Can anyone help me?

    If you are talking about features of the MBP itself, as long as you are not looking at  the Retina models, then the memory you can upgrade yourself for a lot less than Apple charges, and that does not affect the warranty as Apple considers memory a user permitted upgrade.  Great sources are Crucial and OWC, both are Mac specialists and have on-line videos on how to do the install.
    If the 15" is what you are looking at, a good upgrade is the 7200 rpm hard drive, gives a little better performance over the standard 5400 rpm drive.
    The Hi Res screen is good if you do a lot of graphics work.
    Comparing the 13" amd 15" you will notice the 15" has a second, discrete graphic processor...helps when you get into heavy duty videos, games, graphics...but keep in mind that kicking in the second processor uses a lot of power and will run the battery down faster.
    If you are looking at the Retina models, then keep in mind there are no post-purchase upgrade options...you have to buy with everything you want at the start.
    Just some thoughts.

  • Macbook pro crashes and goes to the background image with no access to dock etc..

    Macbook Pro Early 2011 version, running Lion OSX, crashes randomly and goes to the background image. the dock is not accesible nor are any other options, I have to hold down power to restart. I have found that a lot of my applications have started to crash especially iphoto, itunes and safari. Ive repaired permissions deleted anti virus software which i thought was slowing the computer down. Any help would be appreciated..

    I suggest you post this issue on the iTunes forum.  You will have an audience that is oriented specifically towards this application.
    Ciao.

  • TS1367 My MacBook Pro will not go past the grey screen with apple logo in the middle

    How do I fix this issue  is there anything I can do

    Hey there Gonzoeg850,
    It sounds like you are unable to boot your computer to your desktop or log in screen. I do not know if you have tried these steps from the article you have up there, but that is exactly where I would start:
    Troubleshooting: My computer won't turn on
    http://support.apple.com/kb/TS1367
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • My MacBook pro will not load past the grey screen with the spinning wheel. What do I do?

    My MacBook will not load past the grey screen with the spinning wheel of death. Anyone have any solutions?

    Invoke Safe Mode by holding down the shift Key as you restart. This will do a Disk Utility "Repair Disk" as it starts up (so it takes a few minutes longer) and then load with minimal extensions loaded, and request your login username and password, even if you normally do not use them to log in.
    Safe Mode runs the screen using simple, unaccelerated commands. Most things are available in Safe Mode, but things that rely on extensions will not be.
    Acomputer that works in Safe Mode, but fails again after you restart, often implicates your extensions and add-ons.

  • My HD on my Macbook pro 13" is done and I replaced it with new now I cannot boot off Disc

    I had to replace my HD on my MBP 13" with new, I have been trying to boot off MAC OS X Snow Leopard install DVD 10.6 but cannot! HELP needed!

    You need to use the ORIGINAL installation disc(s) that came with your machine. The SL disc is just an upgrade disc. If you don't have the original disc(s) you can call Apple at 1-800-MYAPPLE and, with your serial number handy, order a set of original replacement discs. Cost will be about $20 + tax, I believe.
    Good luck,
    Clinton

  • I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

    I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

    You can either use Office for Mac 2011 or use Boot Camp to run Windows or use a VM, such as Parallels Desktop to run Windows. Running Windows, you'd be able to use MS Office for Windows.
    Clinton

  • My Macbook pro won't get passed the grey startup screen

    My apple macbook pro is not getting passed the gray screen with the apple and spinning circle. I have tried pressing comand-R or shift-command-v, and nothing happens what so ever. I listened to my hard drive, and it sounds fine. It sounds like it is running, and there is no clicking sounds from it or anything, and haven't been any at all. Nothing seems to make it respond

    Direct you to the proper forum for MacBook : 
    MacBook Series Forums
    https://discussions.apple.com/community/notebooks?view=discussions
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro

  • Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only

    Why is it that when I plug my Macbook Pro to an external monitor, the external monitor turns black and shows the mouse only

    Hi, yes preferences sees there is a second display it recognises what make of monitor it is etc but I just get a blank blue screen on the monitor when I change it to the hdmi setting! I have tried with mirroring on and off, rearranging the displays in the preference window and lots of different resolution settings but with no difference.
    An old MacBook connects fine so the monitor and hdmi port must be okay. I'm sure we have used the cable before but it could have been with the previous MacBook Air. The current one I'm using is a mid 2011 version running lion and is (according to software update) all up to date.
    Any thoughts or help would be appreciated!

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

    I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
    The operation can’t be completed because an unexpected error occurred (error code -50)

    I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
    Unfortunately the error messages are archane and it is hard to discover their meaning.
    You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
    A5. http://pondini.org/TM/Troubleshooting.html
    Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
    If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

  • I have a bible app on my iphone that is full of notes I have taken, when I sync it to my macbook pro , then to my ipad the notes I have added do not transfer

    I have a bible app on my iphone that is full of notes I have taken, when I sync it to my macbook pro , then to my ipad the notes I have added do not transfer

    You probably want to open a ticket with the maker of the app.

  • Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

    after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

Maybe you are looking for

  • Calling a Java Store Procedure from PL\SQL

    I have this code in pl/sql FUNCTION validate_against_schema (p_schema IN VARCHAR2, p_xml IN BLOB) RETURN VARCHAR2 AS LANGUAGE JAVA NAME 'JAVA_SCHEMA_VALIDATOR.validation(java.lang.String, java.sql.Blob) return java.lang.String'; And when i'm calling

  • Cross Tab calculation in Individual column-Crystal Report

    Hi experts I am preparing a report in Crystal report 2008. Report template is Cross Tab. Structure of report is Cardname-Row, DocType-Columnd, DocTotal-Summarize field. Result of this report is                       IN(Invoice)             RC(Incomin

  • Displaying Asian characters on Solaris platform?

    I have a java application that can display Chinese, Japanese, Korean & Taiwanese (CJKT) on a Windows platform. It is able to display these characters on Windows because i have installed the CJKT locales and have modified the font.properties file to p

  • Should I Get One?

    OK well I'm going to need a laptop for college in the future. I originally wanted a Mac but I got turned off of them when my iPod Touch wouldn't work with my dad's Mac because he was 0.0.1 versions away from what was required. I thought to myself if

  • Nano Software loading in Windows XP Home

    When installing the nano software the install fails with error code 0x80040707 and you have to exit!!!! Very annoying and no explanation as to why or any assistance. Appreciate any help on this matter. Also you cannot uninstall as you get the same er