When i call, i can´t hear the other person

Hi, I have a problem.
When i make a call, i can´t hear to the other person, i only hear them so far.
Please, help !!

I've got that problem too sometimes. I think it's a mistake in iOS and it will be fixed in another iOS-update

Similar Messages

  • When I make a call, i can't hear the other person, when I get a call, I can hear them and they can't hear me. What's up?

    when i make a call, i can't hear the other person but they can hear me. when i get a call, i can hear the caller, but they can't hear me. what's up?

    Hello there, Maribelita.
    The following Knowledge Base article has some great steps to work on resolving the exact issue you're describing:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Hi I have an iphone 5. When making and receiving calls I can't hear the other person. Has anyone else had this problem?

    Hi I have an iphone 5. When making or receiving calls I can't hear the other person? Anyone tell me what is going on?

    Try taking a look at this support document to see if the steps there help. If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support

  • I just bought this iPhone 4S second hand and during incoming and outgoing calls I can't hear the other person talk unless it's on speaker or if I have headphones in. I don't know what to do I've turned up my volume and checked my settings!! Need help

    I Just bought a second hand iPhone 4S I am having issues with the hearing during incoming and outgoing calls, I have turned the volume up and checked my settings but I still have trouble hearing the other person speak. It works if it's on speaker or if I have headphones plugged in. I need help desperately!!!!! Any suggestions on what to do???

    Hey Itsanaasaunders,
    Thanks for the question. I understand that you are experiencing issues hearing sound while on a call (receiver wise, not speakerphone). The following resource provides troubleshooting steps for this symptom:
    If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
    http://support.apple.com/en-us/HT203800
    Clear the receiver
    The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
    Follow these steps, testing after each:
    - Make sure nothing is blocking the receiver, such as a case or film.
    If you have a new iPhone, remove the plastic film on the front and back of the device.
    - Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
    - While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
    Restart and update
    1. Restart your iPhone and test again.
    2. If there's still no sound or poor sound quality, update to the latest version of iOS.
    Get more help
    If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
    Thanks,
    Matt M.

  • I accidently deleted a voice mail message.  Is there any way to retrieve it?  I was told I had to talk with technical support to reset the password to my voice mail. Can someone tell me how to do this?  When I call, I can't understand the other person

    I accidently deleted a voice mail message.  Is there any way to retrieve it?  I was told I had to reset my password since I entered the wrong one three times.

    Depends on your carrier.  You'll have to contact your carrier for how to do this.  (This is for AT&T: http://www.att.com/esupport/article.jsp?sid=52649#fbid=WLddP4KyTAu.)

  • When making a call I suddenly can't hear the other person but my iphone 4 says it's still connected

    Phone is on orange contract and today during calls I can't hear the other person and the phone thinks we are still connected.  Help please!

    I've got that problem too sometimes. I think it's a mistake in iOS and it will be fixed in another iOS-update

  • When I call I can't hear the ringing sound or the other person talking to me unless I have the headset plugged in or when I have it on speaker. Help please !

    When I call I can't hear the ringing sound or the other person talking to me unless I have the headset plugged in or when I have it on speaker. Help please !

    Mine does this intermittently. Occasionally after dialing the number, I can’t hear anything. I routinely have re-dial and sometimes this does not work either. Sometimes if I close all applications, including the dialer, then restart the dialer, it will work again. Sometimes I have to close all programs and restart the phone. It’s definitely frustrating.

  • Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caler canno hear me speak. Sometimes the problem goe off and works properly, b most of the times, I am facing this problem.

    Just recently, I have encountered a problem with my iPhone. When someone calls, I can clearly hear the caller, but the caller cannot hear me speak. Sometimes the problem is nt there and works properly, but most of the times, I am facing this problem. I have tried plugging in the earphone and speak, but its the same.... can anyone advse what may be the problem?

    iphone 4g have this problem
    first solution :change the flex micro
    second solution : ic audio must reballed
    also watch video
    http://www.youtube.com/watch?v=C-n1LJEK3PM
    http://www.youtube.com/watch?v=prSZ9yJnofY
    http://www.youtube.com/watch?v=tkEiR6OPhhc

  • Can barely hear the other person when talking on the phone

    when using the phone function i can barely hear the other person on the line.. the speker volume is at the max.

    remove the thin plastic cover, its not the protective kind its a shipping one. It is covering you ear piece.

  • Very Low Volume on Phone Calls - Can barely hear the other person

    Just picked up my iPhone 4 at the Apple Store. Tried to make a phone call the the call volume is so low I can barely hear the other person calling.
    The speaker volume is not much better. The other person can hear me fine and says the sound is great.
    The volume dots are all the way up.
    The settings sound voulme under ringer is all the way up.
    ipod volume lock is not activated.
    Any other settings to check out?

    OK now I don't feel like I'm the only one. I've also done a hard reset and still suffer from the same issue.
    Since it seems to be the popular question, no the plastic is no longer on my phone.
    To call the volume I'm hearing a whisper would be a overstatement. This is a much bigger issue than the antenna. The phone is basically unusable without headphones. Unfortunately I'm not very close to a Apple store to exchange.

  • I have just purchased my Iphone 4s, and the volume of the sound is very low, I can hardly hear the other person. I have tried the button for higher volume, but there is no change

    I have just purcahsed my Iphone 4s, and the volume is very low, I can hardly hear the other person talk. I have tried the botton for higher volume, but it doesn`t work. Can anybody give me an answer to what is wrong?

    Did u take out the screen protection?

  • Can't hear the other person when I am talking

    WHen I am using Skype or FaceTime on my iPad, I can only hear the other party speak if I am silent on my end.  I have to keep asking them to repeat because I can see their mouth moving but I can't hear them. In other words, the sound only works one way at a time.  Is this normal, or is there a settings change that make so that sound works both ways at the same time?  Is it a hardware or a software limitation?

    I've got that problem too sometimes. I think it's a mistake in iOS and it will be fixed in another iOS-update

  • I can't hear the other person while facetiming on the Imac

    I cant hear the other person while face timing on my imac but they can hear me

    HI,
    There have been similar issues with iChat and I will use that as an example first.
    In iChat the Mic needs to be On (in the Video menu).
    It also needs to be listed in iChat Menu > Preferences > Video section > Microphone Drop down and this needs to match ther Mic set up in System Preferences > Sound > Input.
    In addition to this the Mic needs to be "turned up" high enough in the System Preferences to work with the app.
    So If you Buddy cannot hear you it is your Problem when it comes to iChat.
    If you cannot hear the Buddy it is much more likely that they have not set up the Mic in System Preferences or have the Mic Off in iChat.
    Moving to FaceTime you will find a Mic Setting in the Video menu (if you have two or more Mics).
    If you do then the System Preferences > Sound > Input  and the volume setting there needs to match the choice in the App.
    As it is your contact that you cannot hear you need to get them to check their settings first.
    As for your end, it will be worthwhile doing a PRAM reset.
    Shut down the computer.
    Restart it holding down Apple/CMD ( or ⌘)+ALT( ⌥)+P+R Keys until you have heard three Start Up Bongs.
    9:06 PM      Thursday; June 27, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Can bearly hear the other person when I make a call...

    When I make a call from my iPhone the other
    end is very faint. I'm sure theres some wicked
    simple solution on like the settings or something
    but I can't find it! Any suggestions?

    the other person can hear you fine, but you can't hear them?
    the simplest thing is the volume rocker on the side, while you are on a call make sure your volume is adjusted all the way up.. after that make sure you don't have the plastic covering the speaker
    after those try a soft reset by holding the home button and the sleep/wake button until you see the apple logo, if that doesn't work try a restore from itunes.. if you are still having the problem after that it is time to call apple 1-800-myiphone

  • On the iPhone 5/5s, can you hear the other person properly when they are lying down?

    When I use the iPhone 5s while lying down in bed, the other person is unable to hear me.  When someone who is using the iPhone 5s is lying down in bed, I cannot hear them. 
    Is this a known issue?  Has anyone else experienced this issue?  Does anyone know what causes this issue?  I actually used to have this same issue with the HTC One, and I was under the impression that it had to do with the accelerometer of smartphones.  I do not know of any other difference between smart phones and normal phones.
    It's rather annoying, such a basic feature of a PHONE product to be able to talk and hear clearly.  Major fail, Apple.  For this alone, I may consider switching to another phone.
    I have found other comments from iPhone 5 users who have the same issue:  http://www.gottabemobile.com/2012/11/29/iphone-5-review/
    MICROPHONE
    I don’t know if it’s because I have big hands or what, but there many times when people on the other end of the phone can’t understand a thing I’m saying. Specifically, any time I lay down flat on my back, the iPhone 5′s microphones seem to go especially bad. A few times, it’s gotten so bad that the people on the other end of the line hung up because they couldn’t deal with it.

    Please Apple.  Fix this significant bug/defect in your product in your next software update.  I know this is a software issue probably related to the Accelerometer detecting that the phone is not upright and then turning off the receiver.  Not sure why you would even want to do that.
    It is ridiculous that the iPhone cannot perform the most BASIC function of voice calls.  After all, that is what you buy the phone for... the texting, internet, applications are all bonus.  Phones are used while lying down, upside down, lying on the side, etc.  You are basically hurting yourself and your customer base with this significant design flaw.  Think about all the couples talking to their significant others when they're lying in bed first thing in the morning or last thing in the evening they are long distance.  Think about hospital patients who want to speak with their families.  Think about the homeless on the streets with their iPhones lying down calling people to give them money (or not...).  
    Anyway, you get my point.  PLEASE PLEASE PLEASE fix it.  I only recently changed from being an Android user to an iPhone user... this is seriously my biggest gripe with your product.

Maybe you are looking for

  • Vevo App issues with Apple TV 6.02 update

    I have 2 Apple TVs.  One is running the 6.0 software and the newest Apple TV that we got for Christmas is running 6.02.  The Vevo app doesn't appear to be working correct on version on 6.02.  The videos have some sort of lag.  It is almost as if they

  • Can I make split keyboard whole again?

    With the latest update when you type you have a split keyboard. Can you please undo this and make it whole again?

  • Setup could not detect any Sound Blaster Audigy card on your system

    Hi from Barcelona! I've a Soun Blaster Audigy card (Model: SB0090) I tried to install the Audigy software and drivers from the original product CD but Setup was unable to find Augigy hardware and halted the installation! "Setup could not detect any S

  • Sybase jconnect and tomcat 5. Getting error:Cannot get a connection, pool

    Hi, I am not sure why i am getting this error. All the drivers are in the write location. Tomcat does find and load the driver correctly. But... when i try to connect, i get this error. org.apache.commons.dbcp.SQLNestedException: Cannot get a connect

  • Tutorial without using JDeveloper Wizard!

    Hello, Does anybody here know any link of ADF Faces/BC tutorial without using JDeveloper Wizard! Manual coding of pagedefs, and manipulating view objects thru backing beans... Our project is quite complex and the tutorials from the Oracle website is