When i Call there is a Echo on my end not theres
ok here the prob everytime i call someone there is a echo even when i use the speaker and the mic.But the other people dont hear the echo only me.Is there anyone that can help me on this problem??????????;)
Did you hear back from them. I would like to know if you have found any solution to this.
I am having simialr issue when calling a landline phone,i hear an echo from my iPhone. On Other end they dont hear any echo at all.
But the thing is its not happening all the time. This is what confuses me the most
Would like to hear what you found out regarding this,
thanks,
Similar Messages
-
I bought an audio book on my iphone when i went to update my iphone it is now not there. I have the reciept of the purchase but cannot find it on my itunes or on my phone how can i redeem this purchase again?
Nope not there i dont know what to do
-
I want to disable my password code. When I go to settings>general - the password code is not there. Where else would it be located? I can't find it anywhere! Please help
If you are running iOS 7, the passcode setting is under settings. 3 lines below general.
HTH -
when someone calls me on Viber, WhatsApp and elsewhere do not appear on my iphone, and when you enjoy my photos on instagram also does not appear to do I do, take the technical assistance?
What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
I just purchase a gift card for my iTunes account. Follow the instruction and place the code to redeem my account. On iTUnes Store Home it shows $15.00 has been credited to my account but when I got to purchase its not there and request for my credit card infomation. Yet when I check the account infomation its in my name but the $15.00 gift card isn't present in my account. What happen to my money?
Forget it I fixed myself
-
i cannot use my iphone 4s to call my wive's iphone 4s i always receive the message this number is not available
Contact your carrier. It's a routing problem in their system.
-
What does it mean when you call someone and your phone suddenly saids "end call"?
I tried calling a friend but the call didn't go through and instead it said call ended on my phone with 2 beep tones, what does this mean?
The call simply did not go through. It happens with cell phones.
Call again. -
Hi.i am trying to download pokerstars from the app store.i type in pokerstars and it does not come up.
Anyone knows what I should doTry a restart.
If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac -
I bought a ringtone and when I sync my Iphone to the computer it desapear.. can't see the ringtone in my phone no more..where should I look?
You look at when you can sect various ringtones for an alert or similar. Like if you go to a contact and tap on edit and then go to ringtone you should see the added tone as a selection
-
Hi All
I have a project in IMovie11 to burn to IDVD. It exits before the end when not complete. The disc is 4.7 GB and the projetc is 4 GB
One has completed and the others has not
Any Ideas please?What encoding settings did you use?
iDVD encoding settings:
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/11417.html
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t. The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US -
Block Caller on iOS 7.1.2, iPhone 5s not there?
I just got my 5s and now my junk contacts are starting to come through again. I went to the contact expecting to see the "Block Caller" option and I'd re-enable it, but I no longer see this. I also tried to see if the option was available on new contacts I create and still nothing.
Is anyone experiencing the same?@razmee209, awe.
Now I am concerned; the number that just called was in the blocklist and should have never come through? -
Sometimes when my macbook pro wakes from sleep the curser has disappeared, the screen is frozen and no keys work. I have to reboot.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I am running IMacs with an OS10.6x operating system. This problem has occurred on several of my machines now. I can still open firefox from alternate profiles on the same machine, but the student profile will give me the message that it is already open and can only have one instance running at a time.
Make sure that the profile that Firefox wants to use and that is specified in profiles.ini still exists. If that profile isn't found then you get that same error message.
See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use -
I have tried to fix permissions and restart and that did not help it show back up and I have also deleted the system preferences cache and still nothing. What can I do?
I also miss the grid layout of spaces. In fact, I'm considering downgrading back to Snow Leopard just to get it back. I used to use command+arrow keys to move around in my grid of spaces. I used to use a hot corner to initiate spaces, then another hot corner to initiate expose while "zoomed out" in spaces. I used to be able to click any window of any app in any space and move it to any other space. I used to be able to move an entire space to another location.
Now I've upgraded to Lion and I cannot do any of that. Serious downgrade, serious loss of efficiency. I've taken the time to learn how Lion handles all this. I've taken the time to change options to try to make MC more efficient. Simply put, it's a downgrade that breaks something great from Snow Leopard.
For example: Initiate Mission Control while on desktop 1 and I see a window on desktop 2 that I want on desktop 3. In order to move that, I have to first switch to desktop 2, initiate MC, then move the app. Not to mention, if that window were under another window, I'd not be able to see it at all!
For example: In SL, to go from space 1 to 9 on a 3x3 layout, I could use command+right, down, down, right. On Lion, I have to use comand+right, right, right, right, right, right, right, right. seriously? Sure, I could use command+9 (if that's even where Lion decided it wanted to keep the app!), but I prefer the efficiency of using 1 hand to do the keyboard shortcut.
Tell Apple you want the option of having spaces in a grid again. Who knows, maybe if enough of us do, they'll bring it back: http://www.apple.com/feedback/macosx.html
Message was edited for grammar by: pistolpete_sf -
I Have been trying to email a document from pages on my iPad in PDF format. i go through all the steps and it seems to send it but the recipient doesn't receive it. Anyone know what I am doing wrong?
Possibly.
You could test that by dropping a largish image into a test Pages document and duplicating it until your document won't send.
Some eMail clients have ceiling levels for file sizes, as do some receiving servers.
Also test to see if you can simply export your file to pdf, in which case it will be retained on your iPad. That would be a first step.
Peter
Maybe you are looking for
-
How Do I Resolve FileOpen Client Errors When Trying to Open a PDF in Acrobat X or Reader XI?
I am trying to open some pdf files received from a client that when I try to open them, I receive an error stating, "The FileOpen client has encountered an error. Please try to re-start Adobe Acrobat / Reader." A co-worker was able to open the sam
-
In my version of RH 7, the option "Generate Adobe PDF" is grayed out in the Printed Documentation dialog, although I have Acrobat 6 Pro installed. At first I though this was because my Arobat 6 installation got corrupt (I somehow lost the PDF printer
-
Building addresses in training and events
My client is going to expand in a very short period from now. It has some building addresses as of now, but will be increased in future. Can the Core Team Member include new building addresses through transaction S_AHR_61011843? Points assured! Thank
-
Positioning and temporarily hiding objects on the stage
(Flash newbie here - bear with me...) I have two graphic objects on the stage overlapping each other. The first I was able to position to the document boundaries just fine. When adding the second object, however, the first object covers the boundarie
-
Presets not active in Lightroom 5. Why?
Why aren't my presets active in Lightroom 5 but are active in Lightroom 4? George