When I call VI on Linux from Teststand on Windows using TCP/IP I get "file not found error".any sugeestions?

I am trying to execute a VI running on Linux from Teststand running on windows 2000 prof ,both running on two different machines.I used TCP/IP for the interface using the following steps on Labview VI:tools>options>VIserver>TCP/IP and gave the ip address of both the machines.When I gave the file path as c:\home\test.vi in Edit labview Vi call window(the Vi in linux is stored in /home/test.vi)and also in remote vi path:/home/test.vi,I get a file not found error.The teststand version is 3.0 and labview is 7.0.Any idea why this is happening and any solutions?

priya guru,
Here is a knowledge base that addresses your question: �How do I call test VIs that reside on a non-Windows platform from TestStand?�
You also need to set TCP/IP Access found in Tools->Options->'VI Server: TCP/IP Access'. Make sure that you list the IP address in the Access List to allow TCP/IP access to that machine. Finally you need to specify which VIs are accessible to remote applications. Open up Tools->Options->'VI Server: Exported VIs' and provide paths to the VIs you wish to be remotely accessible.
I have attached an example VI that demonstrates VI Server in action. Please post back if you are still having problems. Good luck!
Cr
aig H.
National Instruments
Attachments:
Remote_Run_--_VI_Server.zip ‏88 KB

Similar Messages

  • Get file not found error when I try to sync

    I get file not found error when I try to sync Iphone.

    SteveDVD,
    The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
    If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
    And yes, the re-Importation should yield the same result as Linking/re-Linking.
    Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
    That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
    Good luck,
    Hunt

  • CS5 opening file from file server through explorer gets file not found error

    Hi There,
    Has anyone come across an issue with CS5 where they open an ai file through Windows Explorer and gets an error file not found after CS5 has started? Opening through CS5's file > open option does not produce the same error and seems to only error when opening by double clicking on the ai file. Is this a possible issue with shellex open handler registry key?
    Any help would be greatly appreciated.

    Opening files directly from the server can produce errors and damage files. It is generally not advised.
    http://kb2.adobe.com/cps/327/327749.html

  • Getting File not found error when trying to preview in Captivate 8. Have used this before without an issue, so not sure why it's happening now.

    Please help me troubleshoot this. I cannot preview in either Chrome or IE. Thanks.

    Hello,
    Welcome to Adobe Forums !
    Try to run Captivate as Admin and then test the same behavior (Right click on Cp icon and click run as admin) .
    Is it possible for you to post a screenshot of your General preferences , GO to EDIT > Preferences> General.
    It seems that your project cache folder is located on a network drive.
    Thanks
    Himanshu

  • File not found error (404) from web browser

    I installed 901 DB on different Oracle home and iAS 1.0.2.2 in a
    different Oracle home. The ifsconfig went thru fine.
    However I am unable to access the login page ( I executed
    ifsapachesetup ). I tried to access
    http://<machine>:<port>/servlet/files.
    I see the following error in Jserv.log
    ajp12: Servlet Error: NoClassDefFoundError:
    oracle.ifs.protocols.dav.impl.IfsDavServlet
    On the browser I get File not found error ( HTTP 404 )
    Do I need to perform additional steps on Solaris machine ( apart
    from executing apache setup script ).
    Please help me.

    Make sure you have started all the services:
    - ifsjservctl -start
    - ifslaunchdc
    - ifslaunchnode
    - ifsstartdomain
    all are in the iFS bin directory.
    Keith

  • When i try to share a movie to idvd from imovie i get a file not found error

    when i to share a movie from imovie to idvd i get a file not found error can anyone help?

    Hey ninimac!
    Here is an article that can help you troubleshoot this issue with burning DVDs in iDVD:
    iDVD: Troubleshooting issues with burning discs
    http://support.apple.com/kb/ht1583
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • File not found error when opening securedoc.html

    We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
    We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
    I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
    I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
    The time after rebooting when it did work it pointed to file on my local computer hard drive:
    file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
    Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

    used bridge, didn't work.
    tried right-click, double click..open in program.
    same error.
    files work in other adobe products.....
    only way to get a jpg in there is to "paste" it in.

  • File not found error from scheduler

    Hi,
            We have a scheduler file with .cfa extension  in the cf scheduler  which trigger some mails to certain recipients on execution.
    At the bottom option fo the scheduled task, we have checked the option to 'save output to file' and has given the file
    path. On direct execution of the given url, the  file is executed successfully and mails are fired.
    But while trying to execute the same via scheduler it is not firing the mails. On investigation of the output file,
    found the error message 'File not found'.
    Is it possible that the file get  executed when directly browsing the url and shows 'file not found' error
    while executing via cf scheduler?(CF 8 is used.)

    To be more specific,
    the url format given in the cf admin scheduler is like this:
    "http://www.domainname.com/myfolder/myfile.cfa"
    A file path to log the output is also given to publish.
    If we copy the above url to a browser and execute, the file gets executed and mails are fired.
    If we set the interval or run the scheduler from the administrator,mails are not sent.On examination of log file given in the scheduler section, it is
    showing error '/myfolder/myfile.cfa' file not found.

  • File not found error when tried to open Document ID settings page

    Hi
    when i open sitesettings>site collection administratin >Document
    ID settings
    it shows
    file not found error
    adil

    Hi,
    first we need to figure out the error. change the web.config so that you can see the error on browser
    1) Obtain the complete call stack instead of the default error page:
    <SafeMode MaxControls="200" CallStack="false"/>
    to
    <SChangeafeMode MaxControls="200" CallStack="true"/>
    2) CustomeErrors mode value (in the system.web section) is set to Off:
    <customErrors mode="On">
    to
    <customErrors mode="Off">
    Change these value in "c:\inetpub\wssroot"  CA dirctory web.config and
    C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\web.config .
    now again try to do the action. you will get the error on screen.
    Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

  • File Not Found error (-43) when trying to record

    Never had this problem in the past, and haven't used Logic in a few months, but every time i attempt to record, i get that message: File Not Found, Result code error -43
    I am using the MBox 2 Pro as my record in, and Logic 6.4.3
    Thanks for the help...

    Hi,
    I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
    Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
    DS

  • File not Found error when synching Ipod

    I have a fairly new Ipod and synced successfully for months, but now iTunes says it cant synch because of a "File not Found error" (no error number or other clues). I'm running the latest iTines and Ipod software, and I've reset USB drivers but still no luck. I cant reset the iPod itself becase I then got a "1418 error", which is why I then reset USB. I'm stuck, has anyone seen this before?
    The Ipod itself plays fine and Itunes recgnises it OK, albeit very slowly, even thought I'm using USB 2.
    One other piece of info; when this first happened, the sync must have first deleted the songs I no longer wanted, prior to unsuccesfully adding new ones. Those old songs show up on the iPod but are skipped when I try to play them.

    Its on the same thread as this one ("connecting iPod nano (second Generation ) to Windows"). Scroll through the authors, you will find it.

  • "file not found" error in VI Logger when running an imported VI Logger task

    I'm having trouble getting all of my imported tasks to run in VI Logger.
    I'm using VI Logger 2.0, with an SCXI-1100.  The data acquisition tasks I import run fine.  One of the VI Logger tasks I've imported runs OK, but the other one gives an error:
    "Engine Error!
    Error Code = 7
    LabView: File not found.  The file may have been moved or deleted, or the file path might be incorrectly formatted for the OS."
    If I create a new VI Logger task, the new task works OK.  And my 1st VI Logger task to be imported works OK.  So I know my setup mostly works.  But our company has never been able to figure out importing tasks very well, so I'm looking for help.
    Question 1: What file is LabView looking for?  I've checked my Export path and database path, and they are identical in both the working task and the non-working task.
    Question 2: Where else might I look for the difference between the 2 VI Logger tasks?  Neither task uses any weird characters in the name, both have analog input channels and calculated channels.  And I've mixed and matched the data acquisition tasks with no change (the good VI Logger task will run with either data task, the bad VI Logger task won't run with either data task), so I'm pretty sure the problem is in the VI Logger task, and not the data task.  I've also tried importing the 2nd task on its own, as a separate import function, but that gave the same error.
    Thanks for the help in advance,
    Jake

    Hi Spex,
    I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task.  I've attached the file.  The "1 channel" task runs OK.  The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
    This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
    I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
    Thanks,
    Jake
    Attachments:
    configData1.zip ‏353 KB

  • Apache plug-in prob : when trying to access '/weblogic/' URL , "404 : file not found" error is shown

    On : Apache 2.0 , Weblogic 7.0, Win 2000
    I installed the Apache plug-in for as described in WL docs, but when I try to
    access a URL /weblogic/ ( supposed to be configured automatically ) on apache,
    I get '404 : file not found' error.
    As per the docs, I did following config in Apache:
    1. Copied the 'mod_wl_20.so' file found in WLHOME\server\bin directory to the
    APACHE_HOME\modules directory
    2. Added to httpd.conf :
    LoadModule weblogic_module modules/mod_wl_20.so
    3. Apache httpd.conf syntax correct : checked by running ' APACHE_HOME\bin\Apache
    -t '
    4. Restarted WL & Apache.
    Now, the weblogic documentation says,
    "Test the Apache plug-in by opening a browser and setting the URL to the Apache
    Server + "/weblogic/", which should bring up the default WebLogic Server HTML
    page, welcome file, or default servlet, as defined for the default Web Application
    on WebLogic Server. For example:
    http://myApacheserver.com/weblogic/".
    For my server, 'http://localhost/weblogic/' - I get a "404 : file not found" error.
    What other configuration is needed ? Do I have to specify '/weblogic/' name anywhere
    else in Apache configuration file ?
    Any pointers will be appreciated.
    Thanks,
    S

    Forgot to mention , I've also added following configuration in httpd.conf :
    LoadModule weblogic_module modules\mod_wl_20.so
    <IfModule mod_weblogic.c>
    WebLogicHost localhost
    WebLogicPort 7501
    </IfModule>
    <Location /weblogic>
    SetHandler weblogic-handler
    PathTrim /weblogic
    </Location>
    "S" <[email protected]> wrote:
    >
    On : Apache 2.0 , Weblogic 7.0, Win 2000
    I installed the Apache plug-in for as described in WL docs, but when
    I try to
    access a URL /weblogic/ ( supposed to be configured automatically ) on
    apache,
    I get '404 : file not found' error.
    As per the docs, I did following config in Apache:
    1. Copied the 'mod_wl_20.so' file found in WLHOME\server\bin directory
    to the
    APACHE_HOME\modules directory
    2. Added to httpd.conf :
    LoadModule weblogic_module modules/mod_wl_20.so
    3. Apache httpd.conf syntax correct : checked by running ' APACHE_HOME\bin\Apache
    -t '
    4. Restarted WL & Apache.
    Now, the weblogic documentation says,
    "Test the Apache plug-in by opening a browser and setting the URL to
    the Apache
    Server + "/weblogic/", which should bring up the default WebLogic Server
    HTML
    page, welcome file, or default servlet, as defined for the default Web
    Application
    on WebLogic Server. For example:
    http://myApacheserver.com/weblogic/".
    For my server, 'http://localhost/weblogic/' - I get a "404 : file not
    found" error.
    What other configuration is needed ? Do I have to specify '/weblogic/'
    name anywhere
    else in Apache configuration file ?
    Any pointers will be appreciated.
    Thanks,
    S

  • Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both  devices are connected ?

    Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both  devices are connected ?

    That does not involve iPhoto for the Mac in any way - try the iPad forum
    I will request your post be moved
    LN

  • Most search engines are not working, only Google Search works and I get 404 file not found error when clicking the links.

    I have been trying virus killers, malware software from microsoft, I uninstalled Firefox and reinstalled it, I used the option to change all my options to the basic default installed options, I am able to search without problems using Internet Explorer on all search engines, Google Search engine works in firefox browser; but all the links give the 404 file not found error. Links from my Gmail account do not work either...giving me the 404 error. Firefox is much faster than Internet explorer however, this link problem makes me wonder if firefox is really any good.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

Maybe you are looking for