When i cancel one dvd recording the windows stop answering....

... And the dvd dissapear..... FOREVER!
I Tryed this:
-Click on the cancel button -Then the window stop answering and didnt even stop recording my dvd-
-Reinit the finder... NO WAY. Do not run
-Force the end of the finder process... NO WAY... Do not run
-Reinit the computer....Well then the dvd is not there!!!!!! on the finder!
I wonder how can i "mount" the dvd when is not visible on the finder
Now i think you can access the unit with the disks utility... but this is one "arcane" place to find your dvd... I am sure many users never ever opened that tool
Can i mount the dvd from the UNIX shell? -sh-. Anyway this is not a good solution for the average user BUT COULD be ok for me
... And reinit the computer is not a "nice way" as well
Thank you for reading my long post
Bruno

hello xbxjnky, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Similar Messages

  • HELP. Window pops up on Firefox browser that says JavaScript Application, and under that it says 101. There is an OK bitton. when I click OK, up comes the window again and again.

    HELP. Window pops up on Firefox browser that says JavaScript Application, and under that it says 101. There is an OK bitton. when I click OK, up comes the window again. Then after hitting OK again and box goes away, when I move my mouse the box comes up identically again. I even called Apple support. They tried things; told me it may well be some set'''bold text'''ting in Firefox Preferences. This started right after Mac Update Install upon closing. Any help, please. My browser is totally (obviously) stuck in this loop!!! [email protected] jason

    Hi,
    Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
    Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.

  • How to keep the selection as the old when I select one and click the submit

    maybe it is a HTML problem,but I still ask for help here!
    When I select one option in the form's element-select and submit it ,I want to keep the JSP page as old, but I can't .I also use cookie and bean.The problem is still being.

    store the parameter names and their corresponding values in a variable, say Hashtable. After you do the submit, you can retrieve the values from the hashtable.
    example:
    if you have these parameter names:
    "name", "age"
    then you can do:
    Hashtable h = new Hashtable();
    h.put("name", request.getParameter("name"));
    h.put("age", request.getParameter("age"));Have this hashtable available in your response jsp so you can retrive the old data.

  • I just transferred music from a desktop to a laptop to put on itunes. After this exhausting process of renaming and renaming unnamed tracks, when I play one on itunes the song title disappears and though the song plays, I have to rewrite name of song.

    I just transferred music from a desktop to a laptop to put on itunes. After this exhausting process of renaming and renaming unnamed tracks (b/c itunes made me rename them even after I rewrote the names in the music folder of my computer even though I hadn't put the songs onto itunes beforehand when the tracks were unnamed), when I play one on itunes the song title disappears and though the song plays, I have to AGAIN rewrite the name of the song. Is there an actually answer out there???!

    Welcome to the Apple Community.
    i guess you are referring to iTunes Match. It sounds as though you haven't downloaded all the content and are trying to play your music over a poor connection.

  • When I adjust one side of the firefox window, It messes with another side! I Don't want it to do this EVER! How do I stop this?

    If I adjust one side of the firefox window to a new size, that is the ONLY thing I want to change! Why does it do this weird stuff I don't want it to do? Older version didn't do this. What's up with that???????

    I can't make it happen. I'm trying to think of a convenient way to see what you're seeing without having to record a screencast, but I can't think of one.
    Does the same happen in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by extensions (and some custom settings). More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using
    Help > Restart with Add-ons Disabled
    In the dialog, click "Start in Safe Mode" (''not'' Reset)
    Any difference?

  • How do I get DVD for the Windows 7 that should have come with my new laptop please

    This is my first message here so please bear with me. I have just bought a new Lenovo Essentials B570 laptop which has come with Windows 7 pre-installed. Previously I used to buy Dell laptops which used to come with OS Re-installation DVDs which check to see if they are being installed on the hardware it was bought for but would allow us to install the OS on a new hard disk if the original one crashed. Now Lenovo seems to be using a very complicated method to allow buyer's to re-install the OS - they are expected to retain the same hard disk - but what happens is the hard disk crashes and one wants to install the OS along with all the drivers? The Dell DVD allows me to do precisely that. Can I create a similar disk to install the OS on a new hard disk as and when I want/need it please? I have created two sets of DVDs using the OKR software - one set using the 'system presently on disk' and another set for 'resetting to factory defaults' - but from what I have read on these forums these OKR disks would not work if I put a completely new hard disk. So at least if I can get hold of the correct version of the Windows DVD - as I have paid for the license I would be very grateful. Thank you.
    Solved!
    Go to Solution.

    yigit wrote:
    http://forum.lenovo.com/t5/Lenovo-3000-and-Essential/How-to-create-quot-Factory-Default-Recovery-Dis...
    Thanks for the quick reply.
    But to me this looks more like a OKR solution and I have already created these Factory Reset discs.
    Will these discs work if I have installed a completely new hard disk in the dive? Because that is what I would need to do in the rare event that I have a complete hard disk failure.
    What is confusing is the fact that on these forums, I find many messages which indicate that the OKR solution would work only with the original hard disk and it would not work with a completely new hard disk and also that the OKR itself would not be able to change partitions on the hard disk - even when it is the original hard disk. To me this means any disks that are created using the OKR would be useless when the original hard disk has undergone severe change or a completely new hard disk is in its place. Correct me if I am wrong. (In fact I am hoping that I am wrong in that assumption.)
    My laptop has a 750GB hard disk and it has Windows 7, 64bit. I actually want to make this into a dual boot machine with KUbuntu. What is stopping me attempting that is the fact that C drive has bigger partition and D drive is a smaller partition (too small in fact - 30GB these days is practically nothing) and I learn that any modifications I do to drive partitions would render the OKR non functional.
    I can live without this simplistic one key rescue operation if I have recourse to the Windows 7 DVD and that is why I asked the question.

  • Can I change which nic is used for a cluster network when more than one nic on the node is on same subnet?

    This cluster has been up and working for maybe a year and a half the way it is.  There are two nodes, running Server 2012.  In addition to a couple network interfaces devoted to VM traffic each node has:
    Management Interface: 192.168.1.0/24
    iSCSI Interface: 192.168.1.0/24
    Internal Cluster Interface: 192.168.99.0/24
    The iSCSI interfaces have to be on same subnet as management interfaces due to limitations in the shared storage.  Basically if I segregate it I wouldn't be able access the shared storage itself for any kind of management or maintenance tasks. 
    I have restricted the iSCSI traffic to only use the one interface on each cluster node but I noticed that one of the cluster networks is connecting the management interface on one cluster node member with the iSCSI interface on the other cluster node member. 
    I would like for the cluster network to be using the management interface on both cluster node members so as not to interfere with iSCSI traffic.  Can I change this?
    Binding order of interfaces is the same on both boxes but maybe I did that after I created the cluster, not sure. 

    Hi MnM Show,
    Tim is correct, if you are using ISCSI Storage and using the network to get to it, it is recommended that the iSCSI Storage fabric have a dedicated and isolated network. This
    network should be disabled for Cluster communications so that the network is dedicated to only storage related traffic.
    This prevents intra-cluster communication as well as CSV traffic from flowing over same network. During the creation of the Cluster, ISCSI traffic will be detected and the network
    will be disabled from Cluster use. This network should set to lowest in the binding order.
    The related article:
    Configuring Windows Failover Cluster Networks
    http://blogs.technet.com/b/askcore/archive/2014/02/20/configuring-windows-failover-cluster-networks.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • When opening FF via a link, the window doesn't open maximized

    If I start Firefox with a shortcut I have no problems, but if the browser isn't already opened, and I click a link in IRC, email etc. the browser starts in a window instead.
    Simply maximizing the window and then closing the browser doesn't fix it, since it only seem to remember the window position and size as long as it's not maximized.
    Going into properties of the shortcut and setting it to start maximized (it already is) doesn't change anything, since as I said, the problem is only when opening the browser via a link and not a shortcut.

    That's normal behavior for Windows, I think.
    It's possible there is an add-on to address this specific issue. If not, I wonder whether someone could craft a GreaseMonkey userscript that would be able to ''intelligently'' address this situation (i.e., it has to work on any site, but only if it's the only page open).

  • When a html coded page requires the Windows Symbol font, Firefox does not call it, and the English alphabet characters display instead. How can I get the Symbol font to work when the page is loaded in Firefox??

    ''duplicate of https://support.mozilla.com/en-US/questions/902677''
    This site shows Greek letters and Greek words by calling for the Windows Symbol font. The page(s) involved display correctly in Internet Explorer, but not in Firefox 3.6.1 or 8.1. In Firefox, the Greek letter does not appear, it is just replaced with the English letter for the equivalent keystroke. Here is a html line that ought to cause Symbol's Greek letter lowercase alpha to be displayed, but all you get is an "a" :
    (td width="60")(p align="center")(big)(strong)(font face="Symbol")(span style="font-family: , Symbol")a(/span)(/font)(/strong)(/big)(/td)
    **I have had to replace the left and right carets with left and right parentheses. Otherwise, the line actually executes, disappears, and just leaves a bolded "a" on the next line.***

    Reemphasizing, the page code works on Internet Explorer. It does _not_ work with Firefox ver 3.6.1 nor ver 8.0.1 (which I upgraded to, to see if that would solve the problem). The MDC FAQ solution is not a solution, because it forces the html coder to change his language just to accommodate Firefox. Firefox needs to change to conform to standards.
    What did work was that I followed the solution offered on:
    http://hutchinson.belmont.ma.us/tth/firefox3.html
    "How to reenable symbol font in Firefox 3 on Windows"
    <b>**********Solution*********</b>
    Download the file:
    http://hutchinson.belmont.ma.us/tth/symbol8859.otf
    Go to Control Panel/Fonts/Install New Font
    Install the font that was downloaded.
    <b>************Problem Solved*********</b>
    I think Firefox wants you to use _its_ font faces, not the standard Windows fonts. They do not have a Symbol font to replace the Windows TTF, I guess.

  • Any page or website, I move cursor one way, and the window moves in the opposite direction;

    I.E., just moving the mouse around, w/o holding either button down; tried replacing mouse...it isn't that.
    And I mean the ENTIRE window moves on the desktop, not that the contents of the window are shifting left and right.
    Thanx

    Sounds as though Firefox is stuck in full screen mode. To switch between full screen and normal, press the F11 key.
    Edit: if you do not have an F11 key on your keyboard, right-click at the very top (above any bar that floats down) and you should get a short menu with the option to Exit Full Screen Mode.
    Does that fix it?

  • Running FF as regular (non-admin ) user under Windows. FF 34 window moves down unexpectidly when adding a tab or resizing the window. Was OK w/ FF 17

    I resize FF window, or add/remove a tab. The entire window moves down.

    Opening some pages, such as Oracle eGroupware calendar causes the window to move down several steps as well.
    W2008 R2 + Remote Desktop Service.

  • When bad file is created then the process stops

    hi all,
    through interface while we transfer data to a table , if the bad file is created, then the process stops .we want to execute further with all the correct data records excluding records which are in bad file, is it possible ? if yes then how. Because out of 10,000 records if one record is errorneous why the process will stop.
    I checked LKM and found the jython script where it checks the return code <> 0 can I do something there to meet our requirements.
    regards,
    Palash

    Hi,
    You can do this by implementing error checking in the tool, so that only the bad records will be moved into E$ table and remaining records will insert into the target tables. I hope this will meet your requirements.
    Thanks,
    Saravanan Rajavel

  • Connecting more than one pc to the network stops i...

    Hi All - Any help appreciated!
    We recently upgraded to a new BT Home Hub 2.0
    We have one pc connected connected via ethernet, one pc wireless, and one laptop wireless.
    All three connect to the network fine individually, but when more than one attempts to connect at the same time, the internet drops!
    We've tried rebooting the Hub, nothing.
    (I've tried hitting my head against it, but that doesn't seem to work....)
    Regards,
    R

    Hi All - Any help appreciated!
    We recently upgraded to a new BT Home Hub 2.0
    We have one pc connected connected via ethernet, one pc wireless, and one laptop wireless.
    All three connect to the network fine individually, but when more than one attempts to connect at the same time, the internet drops!
    We've tried rebooting the Hub, nothing.
    (I've tried hitting my head against it, but that doesn't seem to work....)
    Regards,
    R

  • How do I open with one click all the windows that I have been minimized? When I right click on the lower bar Firefox icon, I only see the option to close all windows.

    It is used to be that I could right click on the Firefox icon on the toolbar at the bottom of the screen and I would then be given the option to open all windows. Now I only see the option to close all windows. The ability to open all windows is very useful. Have you eliminated this capability? It was a very helpful feature because I often have more than 15 windows minimized at one time. On a regular basis I like to open them all and keep only the ones that I still need. I know that it is possible to see the name of each window that is minimized by moving my cursor over the Firefox icon, but this does not provide enough information. So I have to open each window one at a time to look at it and then decide to close it or keep it - this is a frustrating, time-consuming process. Is there another way to open all the minimized windows at the same time, instead of one at a time?

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
    * Click the link at the bottom of the error page: "I Understand the Risks"
    Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
    * Click the "View..." button and inspect the certificate and check who is the issuer.
    You can see more Details like intermediate certificates that are used in the Details pane.

  • HT201320 when I go to do updates the window pops up apple id password I no longer have this email Ive tried to add a new email but the old one is still showing up. I don't know where or what to do now, can you help?

    needing help to change apple id email address. I went in settings and changed the email but the new one isn't showing up Ive called different support numbers and I changed email but it still shows up.

    If you are talking about app updates, these are permanently tied to the Apple ID used to purchase the app, regardless of the ID on your phone in Settings>Store.  The only way to stop the prompt for your older ID would be to delete these apps from your phone.  The ID in Settings>Store is the one being used for current purchases, not updates of apps purchased using a different ID.

Maybe you are looking for