When i change, create cycle (ksu1),I donot want to create transport request

when i change, create cycle (ksu1)
i donot want to create transport request ?
when i change/create cycle(KSU1,KSU2) i just want to change/create cycle.
i donot want to configure about cycle.
what should i do ?

Hi dittaporn
If you want to change whether your customization should create transport request or not you go in Tcode SCC4.Here you select your client for which you want to make changes and select NO CHANGES ALLOWED .After doing this setting, system will not create request pop up box.but i would suggest, you must ask your system administrator ( Basis people) before make any changes.
Hope this helps you and if found useful assign points.
Regards
Nilesh

Similar Messages

I've created a prproj file and want to create a master DVD. Is there a simple way to do this?

I've created a prproj file and want to create a master DVD. Is there a simple way to do this?

I'm not sure I would call disk authoring a 'simple' process. Unless it's a very basic disk, or course, with but a single timeline and no menus. But the kind of disk we're using to seeing from Hollywood is anything but simple to create, and so not so simple to explain.
Might be time for some research.

Error when applying changes in Form

I get the following error when saving changes in a form. The Form was created using the Report and Form application. If someone can pls help, I would greatly appreciate it!!
ORA-20505: Error in DML: p_rowid=APL11163, p_alt_rowid=transcontrolnum, p_rowid2=, p_alt_rowid2=. ORA-06550: line 1, column 99: PLS-00201: identifier 'transcontrolnum' must be declared ORA-06550: line 1, column 9: PL/SQL: SQL Statement ignored
Error Unable to process row of table APL_TRANSACTION
OK

You should check the source of your page items:
P?_TRANSCONTROLNUM
It looks like you don't have this column in your table or there is a typo in the source.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How to Create BC SET using Transport Request

Hi,
How to Create BC SET using Transport Request.if any one knows help me

Hi Gowri,
The below given description might help u out ..
You want to create a BC Set from a transport request. A transport request containing Customizing data must already exist.
This Customizing request is a change request with which you can copy and transport the changed system settings.
The BC Set is based on the data in the Customizing request. You can copy all the data records in the Customizing request into the BC Set, or select a subset.
You can subsequently edit BC Sets created from transport requests.
Procedure
Enter the Customizing request number and Continue.
-> You can search for requests with the F4 help. The request type is Workbench/Customizing requests. The request status is changeable or released.
-> You get an overview of the transport objects in the transport request. To put a transport object in the BC Set, flag the row Copy.
->The Status column tells you the BC Set-compatibility of the transport object. It can have the following values:
·        green traffic light: The transport object can be put in the BC Set.
·        yellow traffic light: BC Set creation or activation problems are possible. Check whether all data records have been put in the BC Set, after you create it.
·        red traffic light: Table entries exist, but they cannot be interpreted. They cannot be put in the BC Set.
·        Cancel: The transport object cannot be interpreted or put in the BC Set.
You can get detail information about the object at the bottom of the screen, by double-clicking on a row. For detailed information about messages, choose the icon in the Documentation column.
The Activity column indicates the associated IMG activity. If no unique assignment is possible, the field is empty. To assign an activity or change an existing assignment, choose the Change Activity icon. Position the cursor on the IMG activity to which you want to assign the object, and choose Select.
When you have made your choice, choose the Save Data from Transport Request icon.
Make the necessary entries in the following dialog box Create Object Directory Entry. Choose Save.
To create the BC Set with the selected rows, choose Save.
When you read the transport request, the data records are initially only read in the logon language. When you save the BC Set, all languages in the system are also put in the BC Set.
You can edit the BC Set manually at any time. Proceed as described in Change BC Set.
Reward if helpful.
Thankyou,
Regards.

Transport request to be created while adding entries in table

Hi Experts
I am using SAP ECC6 version.
I want to unable transport request when user adds/changes entries from a table.
I have a maintenance generator created with Standard recording routine. Delivery class is 'A'.
I have tried all delivery class options staring from'C' to 'W'.
But nothing is working.
Also in sm30 if i select entries and try Transport, the menu option is also disabled.
If anybody has done this please let me know.
Thanks in Advance
Meghana

Hi,
You can do it with transation SCC4.
There you can check the radio button Changes without automatic recording.
But for this u may require BASIS authorisation. Please contact them.
Regards,
Renjith Michael.

Unable to collect the changed query elements to a transportable request

Hi All,
I had saved the query changes to dummy request, now I have to collect the changed qurey elements in a transportable request. This I am doing in the transport connection tab in rsa1. Now I want to collect only the changed elements of the query, & not all the elements. I have made (changes) restriction to a key figure inside the keyfigure collum. Now when I try to make a collection of this to a transport request - I am unable to find it under the query elements in the transport collection.
Pls advice how to collect it in a transport request & move it?
Thanks & Reagrds,
Shreesh.

Hi Shreesh,
It may be collected under default request. You can collect changed objects by releasing default request.
aftre releasing default request
go transport connection(TX-RSOR) object type -
>query elements -
> Query--> collect your query.
Grouping option as only necessary object
then click on "Package"
then check for your objects if not checked against your query elements(which you want to collect), plz check. at the same time check for your query name it should also be checked then only query will carry the changes.
Hope this will help you.
Thanks,
Vijay.

How to change the transport request of a NOTE without undoing the note

When we applied the OSS NOTE we put it in a transport request. How can we move the objects into another transport request? Since this is a REPAIR type, SAP does not allow manual copy of the entries. I don't want to include the objects of this transport into another one, Is there any other way?

1. Create a new transport request in SE01
2. Select the request and click on "Include Objects: button.
3. Select "Freely Selected Objects: option from the pop-up windoe
4. Select "Selected Objects" option
Now you see three rows without any PGMID selected.
5. Check the checkbox corresponds to the row and enter the value OBJ & OBJNAME (Textbox without any label). (This valued can be retrieved from your previous request).
6. Delete the same object from your previous request.
7. Click on "execute" button.
8. Click on "Save In request" button.

I want to create a script to enter text for me

I dont want to remember my long library card number when I am on their site. I want to create a script to type it for me. I want to associate the script with a hot key. How do I do this?I

Assuming the library site is a webpage, use 1Password. It will do the job for you and securely. Been using it for years for just this kind of thing.
https://agilebits.com/onepassword/mac
You have to pay for it but there's a full 30 day trial so you can see if it works for you before parting with the cash.
(Disclaimer: NO, I'm not assoc'd with the company, just a very satisfied user of this s/w for several years).

ChaRM: read categorization of change docs based on transport request ID

Hi There,
We have ChaRM implemented with 4 level categorization. I am writing a report to find change docs and read their categorization based on a transport request attached to the change doc. Unfortunately I can't figure out the connection. Could you pls give me guidance? Thanks in advance!
Ádám

In the meantime I found a very useful article on the wiki: http://wiki.scn.sap.com/wiki/display/Snippets/Reading+CRM+Transaction+Categories+Hierarchy
If you need my complete code, drop me a mail.
Thanks,
Ádám

BAPI to create/change assessment cycle

Dear ABAP expert ,
Anyone can advise the BAPI
- To Create cost center Actual/Plan assessment cycle (KSU1, KSU7)
- To Change cost center Actual/Plan assessment cycle (KSU2, KSU8), in case the cycle already exist and user would like to update tracing factor or change parameter in the cycle.
We try to avoid BDC as the screen is very dynamic.
Thank you
Anothai

Rob is correct.
Your other cross-posted threads will be deleted / locked.
Please read [the rules|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting again.
We don't have many rules here, but they are good ones.
Julius

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
Menu > Format > Import Styles
The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
Peter

HT1040 trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.

trying to make an ibook and have 800 photos, want format of 8 photos/page, but default is not that- "create" the initial book from iphoto "album" it loads less than 800 pics and then when i change layout i have blanks.
if i clear the book so that it is all blanks and then try to load in the pictures i have it loses the chronology of the pictures that i had established in the album.
is there a way to import photos into an ibook template and keep the original order of the photos without having to do them one at a time?
also, is there a way to insert a photo rather than just dragging it? i have tried the cut and paste funciton but it doesn't seem to work, the target site doesn't seem to register with iphoto.
many thanks for your help.

Photos are added to book in chronological order. So if you want to add them to a book in the order you have placed them manually in an album do the following:
1 - select all the photos in the album.
2 - use the Photos ➙ Batch Change ➙ Date menu option as shown here. Select any date and add 1 minute between photos.
3 - select just one photo from the album and create a book from it.
4 - in the book click on the Options button ➙ Book Settings button and make sure the checkbox for Auto-layout pages is unchecked.
5 - drag the album with your book photos onto the book icon and they will be imported into the Photos tray of the book in your pre-determined order but not into the pages themselves.
OT

How to notify (email) Change Manager when new Change Request is created

Hi there, I am battling to generate an email when a developer creates a Change Request directly in the SolMan system. When he creates a new Change Request via CRMD_ORDER by filling in the Sold-to-Party, Change Manager, iBase etc., the message is automatically in 'To Be Approved'. I want to notify the Change Man ager as soon as a new Change Request has been submitted, but when I check the Actions tab in the message, no email action is listed or executed. I have edited SLFN0001_STANDARD... in SPPFCADM with conditions set. How can I create a email notification for the Change Manager as soon as a Change Request is in To Be Approved status?
Message was edited by:
Bernardt Nel

Hi,
Create a action definition with the following information:
Processing when saving.
No restriction.
Check Schedule Automatically.
Check Partner-Dependent.
Select Partner Function for Change Manager.
Determination Using Conditions that Can be Transported.
Then you have to create an Start Condition such as; userstatus = to be approved.
No scheduled condition is needed.

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

When I change the time zone of the clock, the "Date created" time information for my documents and image files in the Finder window (and in Get Info) is changed. Can I make the time info in "Date created" remain fixed regardless of the clock's timezone?

Creating a infotype 0014 automatically in the background when 0008 changes

Hello All-
We have a wagetype on Infotype 0014 and when we create a record with this wagetype then it is having a balance wagetype in IT0015 so IT0015 with balance wagetype will automatically popup when we create a record in IT0014 and this is because of the the wagetype config.
When ever IT0008 changes we want to create a new IT0014 with the wagetype in question and a new record in IT0015 also.
But when I tried this Dynamic actions I can pass parameters to IT0014 and do it in the background, but I can not control IT0015 as this is comming automatically from the wagetype config.
We are trying to write a custom code to achive this by BDC recording in PA userexit -> PBAS0001 but its not working. Is there any other way or any other user exit to do this??
Thanks-
Chakri.

I've done this type of thing with BAdi definition HRPAD00INFTY (this is a more recent BAdi so you may need to check if it exists in your system) during the IN_UPDATE method. In this BAdi, I check to see if I need to create a new IT0014 and if I do, I submit an external program which eventually calls the HR_MAINTAIN_MASTERDATA function after a number of complicated calculations - it's quite a few steps but it does work.
In my case the CATS transfer into infotype 2002 which is run in background will kick off an update on IT0014 in the case of a certain time type being entered. By keeping it in infotype 2002, it also allows our payroll group to manually add entries there as well and this process will still work.
Hope this helps.

When i change, create cycle (ksu1),I donot want to create transport request

Similar Messages

Maybe you are looking for