When i change the hard drive does the admin user and pass change ?????

when i change the hard drive does the adminstrator user and password change ?????

bin_bella wrote:
when i change the hard drive does the adminstrator user and password change ?????
Yes, if you do a fresh install of the operating system, it's like a brand new machine.
No, if you restore from a backup like a bootable clone or TimeMachine drive.
Most commonly used backup methods

Similar Messages

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?

Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the

I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the motherboard

The click usually indicates a big problem, but...
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

Macbook pro redina display keeps on telling me that the hard drive is full from Videos, and yet their is no videos, what can i do?

Macbook pro redina display keeps on telling me that the hard drive is full from Videos, and yet their is no videos, what can i do?

If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

Restore the hard drive to the factory WinXP OS image - T60 1951-A31

I'm trying to restore the hard drive to the factory WinXP OS image on a number of 1951-A31 ThinkPad T60.
Found these instructions in the trouble shooting guide:
1. If possible, save all your files and shut down your operating system.
2. Turn off your computer for at least 5 seconds.
3. Turn on your computer. Watch the display carefully. While the message, “To interrupt normal startup, press the blue ThinkVantage button” is displayed, press the ThinkVantage button. The Rescue and Recovery workspace opens.
4. Click Restore your system and follow the instructions on the screen.
The problem is that Restore your system does not appear.
I found a thread on Thinkvantage looks promising: No Restore Option
The thread has this:
04-03-2009 12:55 PM
kamszelei, welcome to the forum,
from a lurker
which version of Think Vantage System Upate do you have installed?
If you have version 3.13.0009 installed please try the following; boot into Windows and run TVSU. It'll update itself, restart, then update itself again. Hopefully the option to recover to factory content will then be available to you.
Please also check the following registry key; HKLM\Software\Lenovo\TVT Common
If the "System Type" key is 1, change it to 0. If it is already set to 0 don't change anything and let us know
Unfortunately my Thinkvantage update system is saying it cannot connect because it is not running
Here are my questions about ThinkVantage:
How do I get Thinkvantage update to run?
How do I find the version number for Thinkvantage
How do I "boot into Windows and run TVSU
My other question is this:
Can I simply buy the backup DVDs with the original XP?
Thanks
(mod edit: fixed broken link)

You need to have a harddrive installed that contains the original system restore partition, many people delete them because they are redundant and use up space and after a while, most of the content is outdated, meaning it will install 4-5yo system and software that you'd only want to replace or update anyway. I prefer to install from a windows setup disc, but you can buy the restore sets, it's a set of 7 or 8 CDrom, not DVD discs. Lenovo sells them I believe, or if you can find someone willing to copy a set and send them to you, it would save you some money. I can tell you that if I had a several of these to do, I'd much rather use a single windows setup disc, preferably one with the latest service pack and updates, so I'm done after a few mins and one disc, opposed to installing many discs, changing from one to the other, then in the end downloading and installing service pack three, then a few dozen hotfixes, it could turn into hours of work on each unit, but if you want them with all the preloaded software, then that is the only way. Good Luck
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

hi iv got a sky router downstairs and a time capsule up stairs how do i set it up so that it just extends the sky wifi and then the hard drive in the time capsule is accessible from all over the house thanks

Connect an Ethernet cable from one of the LAN <--> ports on the back of the Sky router to the WAN (circle of dots icon) port on the back of the Time Capsule. This connection must be maintained at all times.
Then, using the setup "wizard" on your iMac illustrated below, configure the Time Capsule to create a wireless network that uses the exact same wireless network name and password that the Sky router is using.
You can get the setup wizard going in several different ways, but the simplest might be to click the WiFi icon at the top of the Mac's screen and then click on Time Capsule under the heading of New AirPort Base Station.
The wizard will open up and analyze the network, then the suggest the correct setup. The example below shows an older AirPort Express that is about to be setup in the same way. You will see a Time Capsule icon on your screen when you run the setup wizard.

After connecting the Hard Drive to the airport extreme, where can I find the file location in Windows 7

After connecting the Hard Drive to the airport extreme, where can I find the File Location (to access my files from my Hard drive)

Hi,
Try this select to check backup history:
Select
r1.database_name,
r1.name,
(case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType,
r3.physical_device_name,
r1.backup_start_date,
r1.backup_finish_date,
r1.backup_size,
r1.compressed_backup_size,
r2.is_compressed,
r1.server_name,
r1.first_lsn,
r1.last_lsn
from msdb.dbo.backupset r1
inner join [msdb].[dbo].[backupmediaset] r2
on r1.media_set_id = r2.media_set_id
inner join [msdb].[dbo].[backupmediafamily] r3
on r1.media_set_id = r3.media_set_id

Can the hard drive from the Time Capsule be used as USB drive only?

My Time Capsule "router" kept losing the wireless capabilty, so I purchased an Airport Express (with the dual-band router).
I'd like to salvage the Time Capsule hard-drive portion and connect it to a USB port.
But when I plug-in the Time Capsule, the light blinks yellow suggesting some configuration problem.
When connecting to a USB port, my iMac will not detect a new device.
Can the Time Capsule hard-drive be used separately from the router?

Can the hard drive from the Time Capsule be used as a USB drive only?
Sorry, but no. The Time Capsule is a network drive, so it must be connected to a network using an Ethernet or wireless connection. The USB port on the Time Capsule is there only to add additional storage capacity.
Can the Time Capsule hard-drive be used separately from the router
Yes, you would configure the Time Capsule in Bridge Mode to do this. If you do not need the wireless capability, you can turn the wireless off on the Time Capsule.

Encrypt the hard drive on the iphone?

I am lobbying my organization to support the iphone for mobile users. Justifiably, there is concern about security. Most questions are answered by all of the FAQ available...there is one question I still need an answer to. "Can the hard drive on the iphone be encrypted? This is how we protect our laptops.
Thanks in advance.

I think the concern is that someone can crack open an iphone, pull out the flash storage, hook it up to a reader of sorts, and just read all the data...
I think the answer is, don't store confidential data on the phone.
You can use the iphone to VPN into your corporate network and access the confidential data via a web app... Then you would need to clear out the cache when done...
I would think that email would be the biggest concern... that is why remote wipe exists.. don't lose your phone.. if you can't find it, know how to get it wiped ASAP.
or... don't access your sensitive email on your phone...
Peter

This morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage E

this morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage Error Code" message.
Did my HD just crash and unrecoverable? Time to replace my notebook?

I believe your hard drive has failed. Hope you have a backup.
Failing Hard Drive Sounds http://datacent.com/hard_drive_sounds.php
Listed by drive manufacturer. Click on the > next to the drive & you will hear the typical failure sound.
How to Tell When Your Hard Drive is Going to Fail
http://www.lifehack.org/articles/technology/how-to-tell-when-your-hard-drive-is- going-to-fail.html
Grinding And Clicking – Symptoms Of A Failing Hard Drive
http://pcperformancetools.com/getdata/grinding-and-clicking-symptoms-of-failing- hard-drive.html
Failing Hard Drives
http://losangelescomputerhelp.com/computer_networking_news/failing-hard-drives.h tml
 Cheers, Tom

How can my daughter use the hard drive in the Time Capsule ...

So, I am in Oklahoma and my daughter is in Tennessee...
She has a Time Capsule where the Wi-fi base station quit working, but the hard drive may be OK.
She bought an Airport Express to use as a wi-fi router.
The question, then, is:
How can my daughter use the hard drive in the Time Capsule to do Time Machine backups?
Thank you very much for your insights.
Roberto

It can be done but is very messy. That is assuming the TC is still functional which I kind of doubt.. the wifi is seldom the only thing that will die .. so whatever problems it has the wifi would be the least of it.
Anyway.. do a factory reset to get started.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
If the LED is not lit then the TC is dead, not just the wireless.
The setup for using the TC is explained in the bottom of this thread.
TC in a second local network.
https://discussions.apple.com/thread/4817218?tstart=30
The idea is to set the TC to provide router function.. and the computer plugged in by ethernet to as a second network.. but there are rules on how this is done which I have explained in that thread.
I notice that Mountain Lion deals better with order of network priority than Snow Leopard used to .. so it might not need to have manually set gateway and dns.. although I would still recommend it. It simply stops the second network causing issues.
It is much easier to simply purchase an external drive and plug that in.
It is cheaper, faster and more reliable than using the TC for TM anyway.
Plus a lot of the later machines no longer have ethernet ports.. and using dongles is far from neat.. although thunderbolt to ethernet is IMHO necessary accessory for anyone without ethernet.

I believe my macbook pro hard drive is bad. I erased the drive and reinstalled the OS and the macbook still runs really slow. I dont know if the hard drive is the issue.

I believe my macbook pro hard drive is bad. I erased the drive and reinstalled the OS and the macbook still runs really slow. I dont know if the hard drive is the issue.

Did you try an SMC reset too? It's easily done and none of those resets to the best of my knowledge hurt anything. When I was fooling with my system, which at one point was a home made Fusion setup, I needed to reset the SMC sometimes to get the drives recognized. Reading the documentation the sudden motion sensor is drive related but that seems to be about it.
Some more specifics may be needed about the drive itself, the model number of your unit, and the OS version you're running.
At present, the problem seems sort of odd to me. FWIW cable problems can be quite intermittent. I used Scannerz to find some of the problems on my original system that I later converted to a new HD and SSD combo. It can find lots of problems if you learn how to use it right (HD problems, logic board system faults, and cable problems) but you need to get a system at least partially up and running to use it, and it doesn't sound to me like your there right now (in other words, don't go out and buy it because at this point I don't know how it could help you)
Another word of advice would be to not go out and start throwing parts at a problem unless you have a good idea what the source of the problem is. If you have a logic board problem, new drives and new cables won't make it go away, you'll just be wasting your money. Logic board problems, cable problems, and drive problems can all have very similar end user symptoms. The article that I linked above named "Hard Drive Problems" has a section on general symptoms of problems and if you read the article it becomes clear there's a lot of overlap associated with different types of problems.
I assume that your unit isn't under warranty. If, by chance it is I wouldn't even fool with it and I'd take it to Apple and let them deal with the problem. You also might want to check with whatever Apple sources you have available to test your system, like an Apple store, and see how much they'll charge (if anything) to evaluate the system.
I certainly hope this helps.

Greeting, I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the in

Greeting,
I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the information on it so could you tell me what kind of encryption will be used or is there any way to recover the information?
Thanks!

I think FileVault is used to encryp internal hard drive but I wanna encrypt an external hard drive with Mac OS Extended Journaled Encrypted which is completely different!

I had to have the hard drive replaced on my computer and i lost all my iTunes data and I hadn't backed up my music. can I still transfer music from my iPod to a new iTunes?

I had to have the hard drive replaced on my computer and i lost all my iTunes data and I hadn't backed up my music. can I still transfer music from my iPod to a new iTunes?

Music Rescue also works as far as restoring your playlists etc. I've used it twice, you can use the Quick Recover mode, but have to click continue trial (something like that) allot, cp. to purchase option. Otherwise diesel is right as far as restoring via your purchase history.
Here is a review of Music Rescue.

When i change the hard drive does the admin user and pass change ?????

Similar Messages

Maybe you are looking for