When I change the size of a symbol in itself, it is never updated outside the symbol.

Hello,
I created a symbol there some time ago with graphics and elements inside. This symbol has well-defined dimensions according to the elements it contains, and is used several times in my project.
For some reason, later I need to change the elements in this symbol. So I have to resize the size of the symbol within itself.
This works fine inside, but outside, my symbol still keeps the original size, and, whatever happens.
So it can create problems if I need to change the position of my symbol or change the alignment relative to the elements of the same level.
For information it's been a while since I worked with Animate and I always had the problem, whatever the version ...
Is there a way to fix this?
Or maybe the problem is known and will be part of the next update?
Thanks for reply

Hi LP700CR7,
This is a default behavior, I am afraid, its not possible to stop this behavior at this stage within Muse.

Similar Messages

  • My canon 9000 mk 2 is producing different colors when I change paper sizes.

    When I change paper sizes on my Canon 9000 mark II, I have been getting odd colors on some size paper settings.Paper type and other settings are the same.I did try to download new driver when this started to occur. However, I deleted the new driver and reinstalled the old print driver. The problem has not gone away.

    The printer only does what it is told.  Barring a malfunction, that is.  So, I would look else where.  Your photo editor?
    EOS 1Ds Mk III, EOS 1D Mk IV EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 70-200mm f2.8 L IS II, Sigma 120-300mm f2.8 EX APO
    Photoshop CS6, ACR 9, Lightroom 6

  • HT1310 I press option when starting up my computer and it just hangs or at least never gives me the list of startup disks before it's booted up.

    I press option when starting up my computer and it just hangs or at least never gives me the list of startup disks before it's booted up. I can choose which startup up disk when I'm already booted up from settings --> Startup Disk but how do I know if my Macintosh HD internal drive disk fails I'll be able to boot from my supposedly bootable backup drive?
    What am I missing? I have the latest Mountain Lion, could this be bug in that new Op System?
    Does the startup drive list (before bootup) only show up if the Macintosh HD is not bootable (crashed or broken)?
        Dave

    Replugging my keyboard into my front USB2 slot was half the solution. I had my keyboard plugged into a KVM switch which goes into the back. The other half was that I needed to unplug my backup firewire hard drive from the front port to a chained drive with the source hooked into the back of the Mac Pro. Not sure if it was the cable or the firewire slot that gummed up the hardware startup hard drive selection diaglog.
    I also tried resetting the NVRAM and only got one Mac startup sound. That didn't seem to do it but then again it could of been a necessary condition as well.
    Thanks everyone for your help.
       Dave

  • Having problem with updating to 10.6.6 , my software now is 10.5.8, when the my mac is tellin me that i have already update to the lastest software when i haven`t :/ help !

    having problem with updating to 10.6.6 , my software now is 10.5.8, when the my mac is tellin me that i have already update to the lastest software when i haven`t :/ help !

    You need to find a store selling it and purchase it. If you buy it from an online store, it comes in the form of a DVD shipped to you.
    Unless Apple or someone with a site license applicable to you says otherwise, you can't download it.
    (60044)

  • When i start firefox it takes about 30 sec. and he is stopping the working of my mcafee? it started after i update to the 10 version!

    when i start firefox it takes about 30 sec. and he is stopping the working of my mcafee? its started after i update to the 10 version!

    Thanks for the feedback. You can also try to inform [https://community.mcafee.com/index.jspa McAfee].
    Firefox has a add-ons page to temporarily or permanently disable add-ons for checking: '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''.

  • IMovie is already on the latest version. App store keeps asking me to update to the latest version (10.0).

    I really do not know how I got into this state. Basically, my iMovie is on version 10. But when I go to App Store update, it says I have to update to version 10 (Same version). I hit the update button. The update button went inactive for a few seconds and came back (does not say "Updating"). But when I go to launchpad, it's starting to download iMovie. How can I remove this update from the App Store?

    The same is happening to me right now, but with GarageBand.
    It seems to be an issue with the App Store app on the Mac, which Apple has to solve somehow.
    I just leave this "update" as is until the App Store app with notify me with a real update in the "Updates" section.

  • The app messenger was not installed because the ipod needs a new version but i'm just updated to the last verison.What i do?

    The app messenger was not installed because the ipod needs a new version but i'm just updated to the last verison.What i do?

    What model iPod do you have and what iOS is on the iPod?
    What is the specific app?
    If you have iOS 4.2.1 or later on the iPod and there was version compatible with that version, then you should be able to get a compatible version by:
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    App Store: Install the latest compatible version of an app
    You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

  • TS1702 My iBooks is refusing to launch on the new iPad. Worked yesterday. . I have restarted the iPad and nothing. Latest os and no app update in the store.  Help

    Tring to launch iBooks just flashes an goes back to launch icon My iBooks is refusing to launch on the new iPad. Worked yesterday. . I have restarted the iPad and nothing. Latest os and no app update in the store.  Help

    Have you tried closing the iBooks app completely and seeing if it works when you re-open it ? From the home screen (i.e. not with iBooks 'open' on-screen, though it sounds like you can't get it to be open anyway) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iBooks app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset (not sure whether this is what you meant by a restart) : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Had to remove itunes from my computer to reset the computer. Now I'm having problems syncing my iphone with the computer. Computer is saying it wants to download updates to the phone but that will delete things I downloaded straight from the phone. Help!

    Had to remove itunes from my computer to reset the computer. Now I'm having problems syncing my iphone with the computer. Computer is saying it wants to download updates to the phone but that will delete things I downloaded straight from the phone. Help!

    iTunes thinks you have a new computer because you restored the OS. Open iTunes and authorize it to the same account you have on the iPhone. Did you restore your iTunes content from a backup after resetting your computer? Have you been syncing regularly with the computer, and does the iTunes library on the computer contain your apps, music and videos? If so just sync and your content will be removed then restored.
    If you have not hopefully you have now learned something. You can recover apps and purchased songs by connecting the phone, without syncing, and choose "Transfer purchases..." from the File menu.

  • My iPhone says I have 5 app store updates.  I press update and the wheel just spins and it never updates.  the Icon stays black like its updating, but in never does

    my iPhone says I have 5 app store updates.  I press update and the wheel just spins and it never
    updates.  the Icon stays black like its updating, but in never does

    Hello Donna,
    I'm sorry to hear you are having issues with your iPhone. If you are having issues completing your app updates, you may want to make sure you can otherwise access the iTunes Store/iOS App Store. You may want to try the troubleshooting steps outlined in the following article:
    Can't connect to the iTunes Store - Apple Support
    If the iOS version listing in your post profile is correct (iOS 8.0.2), you may also want to make sure that your iPhone is updated to the most recent version of iOS:
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    Sincerely,
    - Brenden

  • I cannot type a web page on my iphone5 on the search or enter website name window of safari. as I type w the system brings me back to the phone main screen. This has happened since I updated to the new iOS 8

    I cannot type a web page on my iphone5 on the search or enter website name window of safari. as I type w the system brings me back to the phone main screen. This has happened since I updated to the new iOS 8

    You haven't mentioned any steps you might have tried to correct this so I'll suggest you try the first troubleshooting step. Reset your iPhone. Press and hold the Home and Sleep/Wake buttons simultaneously until the Apple logo appears. Then release the buttons and let the device restart. No data will be lost doing this. It's like rebooting a computer.

  • When I change font size using ctl + the settingis not saved after shutdown.

    I have poor eye sight .A site I visit daily to read is easier with larger font. I use ctl + to enlarge t6he font but when I shut down my computer and the next time I go to the site it is back to normal. I have noticed that the "SAVE AND QUIT " option is no longer available.

    You can use one of these extensions to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • Master Pages don't transfer when I change page size in a book

    I had exactly the same problem in CS4, which is why I switched to CS5.5 -- but apparently nothing has changed.
    I have a book of about 30 chapters.  It was originally set up in 6x9 format, but after it was all formatted, my client decided he wanted the pages 5x8.
    It should be easy, right?  Just change the layout for the master pages of the Style Source document, fix the text sizing, etc.  Then in each ensuing chapter, just download the new masters from the style source document.  When I get a warning asking me if the master pages in the target document should be overwritten, I say yes and it does its thing.
    Only it doesn't work.  Oh, the text in the masters is all over the place, which is to be expected -- but the master pages and the book pages are still 6x9, not 5x8.
    I tried synchronizing the book, being careful that Master Pages is checked in the options.  I got a warning that some of the text would need to be fixed.  No problem.  Except that the pages in all the documents except the Style Source are still 6x9!!
    I have a feeling I've wasted my money on the upgrade.  A lot of bells and whistles have been added, but the CS4 problems aren't solved.
    Please, can somebody help?  I do this for a living, and I'm wasting waaaaaay too much time trying to clean up messes like these.

    No, Peter, I never solved it.  But thank you for asking!
    I finally started a whole new book, with the smaller master pages.  I saved a few blank pages for each chapter file, then I copied and pasted the text of each chapter onto the new pages.  Fortunately I was able to transfer paragraph and character styles to the new document, and the formatting of the copied text transferred also.
    But it was still a lot of work.
    I don't even want to think about trying to design a document with different size pages!

  • Drop in layers visual quality when I change comps size -WHAT???

    Hi there! So check this out. I import a progressive frame quicktime movie into AE, drag it to the new comp button in the project window and a new comp is created matching the specs of the source material.
    But as soon as I change the size - width and height - of the comp in the composition settings window, the visual quality of the quicktime in the comp degrades dramatically. it's like someone dropped a fast blur on it with a value of around .5 or 1. Any ideas on what the heck is happening?
    working on a 2 x 3 GHz Quad-Core Intel Mac running 10.4.11
    9 GB 667 MHz DDR2 ram
    Radeon X1900 w/512 MB video ram
    1 TB raid
    After Effects CS3 Professional vs 8.0.2.27
    Quicktime 7.4.5

    David & Mylenium,
    I should have been more specific. Sorry. This is what's happening. The source is a 1920 x 1080 sq. pixel Apple ProRes 422 quicktime. I bring the footage into AE, key it and then prerender it.
    Then I create a new comp (by dragging the footage to the new comp button) based on this prerendered footage. I do any compositing/etc i need to and then I take this final comp and render a master quicktime. Finally, I wait for my designers to tell me what size dimensionally they want the video to be ( it goes to FLV).
    Once I get this info, I create a new comp one of 2 ways....
    1. I drag the master quicktime to the new comp button, it makes a new comp (everything still looking fine) and then I change the dimensions of the comp to fit the designers request. As soon as I change the dimensions of the comp - the video looks like garbage. it looks like it's been slightly blurred - before and after I've scaled it down to fit the new size of the comp.
    2. Sometimes I create a new comp with the dimensions the designers requested and then drag the master quicktime into it. Same thing. Blurred/bad footage before and after scaling to fit.
    What in the heck is going on? Is there some strange ratio between height and width AE has to have? My footage is SQ PIX so... what the heck?
    So David, when you ask if my footage is scaling to match the new comp size, the answer is no. If my footage is 1920x1080 and the final comp size is 400x340, I scale the video down so that all the action/movement of the actors fits into this size.
    Mylenium, my footage and comps are SQ PIX and its the same with both OpenGL on and off. As far as for the codec, I see this with my original codecs - both DVCPro-HD and Apple Prores 1920x1080. I also see it happen with the prerendered qt's that have animations codecs.
    I'm sorry for the long post guys. It's just been thoroughly frustrating. This footage should stay sharp. Sometimes it does. Sometimes it doesn't. It's very strange. I've trashed prefs, reinstalled, retraced my steps and found nothing.
    Time to pull my hair out. But thanks for your responses though!!

  • Dynamic pdf up to 200 images, the size of pdf is larger, cannot save data and images to the form

    Hi all,
    My client would like to dynamic images up to 200 pictures to my forms. It is working fine. However, when I add images up to 35 images. I could not add images to the form any more. Then, I save data on the form. All images and data typed on the form are disappeared. I don't know reason.
    If I only add 10 images - I can save data and images on the form. The size of pdf is 15456 kb.  I was unable to  add more pictures or data on the form.
    Maybe there are problem the size of pdf? How much size can an dynamic pdf  limited?
    Can we save the information and images as much as we want?
    I have spent 2 weeks to work and try to figure out this problem. However it is not successful.
    Please help,
    Cindy

    You should ensure, that your users do not import big images.
    Therefore you can use a script on the change event of an image field which checks the data size and warns the user if the file is too big.
    function formatNumber(number) {
        var num = number + '',
        x = num.split('.'),
        x1 = x[0],
        x2 = x.length > 1 ? '.' + x[1] : '',
        rgx = /(\d+)(\d{3})/;
        while (rgx.test(x1)) {
            x1 = x1.replace(rgx, '$1' + ',' + '$2');
        return x1 + x2 + "KB";
    var sizeLimit = 200, //allow upto 200KB images
      thisSize = Math.round((this.value.oneOfChild.value.length * 3 / 4) / 1024);
    if (sizeLimit > 0) {
      if (thisSize > sizeLimit) {
      xfa.host.messageBox("Note: With " + formatNumber(thisSize) + " the size of the imported image is greater that the recommended maximum of " + formatNumber(sizeLimit) + ".\nLarge images can cause a insufficent performance.\n\nIf possible, use images with the following recommended specs:\nFormat:\t\tPNG or JPG\nColor depth:\t8 Bit (higher is not supported)\nColor space:\tRGB (CMYK is not supported)\nFile Size:\t\t" + formatNumber(sizeLimit), "Recommended image size exceeded", 3, 0);

Maybe you are looking for