When i choose operation mapping the system prompt no suitable date fund

when i choose operation mapping the system prompt no suitable date fund, i can't find the reason. I hope to get your help

HI Nathan,
Your Receiver Interface name is SI_Billhead_In.SI_BillHeadIn and the one you have used in ID is different from the one in Interface Determination.
Try changing the above and it might work.
Thanks & Regards,
Tejas Bisen

Similar Messages

HT3986 I have installed windows 7 into my macbook pro 15 inch with lions. This computer is the current 2.2 GH i7 chip with 500 GB HD. Now, how do I install the drivers. When I started boot camp, the system prompted me to create a CD. What do I do with

I have installed Windows 7 into my Macbook Pro 15 inch with Lions as operating system. (current model with 2.2 GHz i7 processor, 500 GB HD ad 5400 rpm). When I started with boot camp, the system promped me to create a disc, which I presume is for the drivers for windows 7. Now windows is intalled. What do I do with the CD that the system created for me? Also, why does the system automatically start in Win7 instead of Lion. I need to pression the option key to have it start in OS X. I thought it was supposed to be the opposite.

Insert it while you are in Windows, if it does not autostart run setup.exe.
Choose your startup disk using Apple>System Preferences>Startup Disk (in OSX) or Control Panel>Boot Camp>Startup Disk (in Windows)

Server0 stooped when I try to start the system...

Hi gurus,
I don´t know what´s happen when I try to start the system and the Java side don´t start, it stay in MMC console with yellow semaphore at disp+work.EXE and when I look inside of J2EE Process Table in the same console the server0 is stopped and it show the exit code -11113 !!
I checked two logfiles:
dev_server0 :
Sun Aug 23 21:42:48 2009
14.537: [GC 14.537: DefNew: 103014K->17353K(131328K), 0.0753503 secs 103014K->17353K(1004800K), 0.0754636 secs]
Sun Aug 23 21:42:50 2009
16.592: [GC 16.592: DefNew: 104905K->18569K(131328K), 0.0589135 secs 104905K->18569K(1004800K), 0.0590141 secs]
Sun Aug 23 21:42:53 2009
JHVM_RegisterNatives: registering methods in com.sap.mw.rfc.driver.CpicDriver
19.422: [GC 19.423: DefNew: 106121K->25119K(131328K), 0.0994074 secs 106121K->25119K(1004800K), 0.0995054 secs]
JHVM_RegisterNatives: registering methods in com.sap.i18n.cp.ConverterJNI
Sun Aug 23 21:42:54 2009
JLaunchIExitJava: exit hook is called (rc = -11113)
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
JLaunchCloseProgram: good bye (exitcode = -11113)
dev_disp:
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1)
***LOG Q0K=> DpMsAttach, mscon ( sapssm)
DpStartStopMsg: send start message (myname is >sapssm_SSM_00 <)
DpStartStopMsg: start msg sent
Sun Aug 23 21:40:24 2009
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Sun Aug 23 21:40:25 2009
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet
DpMsgAdmin: Set patchno for this platform to 201
Release check o.K.
Sun Aug 23 21:40:38 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE

Hi Arun Singh,
I´m not change any UME parameter. I checked that in fact J2EE_Guest was locked, I already unlocked this user! But I think that is not the problem, because I checked in other systems and in all of them this user is blocked, so don´t seem this is the problem!
The following are server VM settings:
-Djco.jarm=1
-XX:MaxPermSize=256M
-XX:PermSize=256M
-Xms1024M
-XX:NewSize=171M
-XX:MaxNewSize=171M
-XX:+DisableExplicitGC
-verbose:gc
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-Djava.awt.headless=true
-Dsun.io.useCanonCaches=false
-XX:SoftRefLRUPolicyMSPerMB=1
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-Djava.security.policy=./java.policy
-Djava.security.egd=file:/dev/urandom
-Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy
-Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy
-Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy
Answering to your second question in fact the system have the license out of date! But at two weeks ago the license was in the same state (out of date) and the java side on system was fine!!!...
Best regards,
João Dimas

How to see the BPS menu options when you log-in to the systems

Hello All:
I am able to use BPS0 and BPS_WB transactions to directly access the BPS development environment.
But I am not able to see the options for accessing these transactions in the user-menu(that appears to the left of the screen when you log-in to the system). I am using the BW 3.5 system. What should I do to see them in my menu?
Thanks,
Kumar

Hello Ajay,
I created a new role called "zrole" for displaying planning trasactions in the menu. The name of the area menu to see the planning transactions in BW 3.5 is "RS00_PLAN". I am now able to see all SEM planning transactions in the menu.
I am awarding full points.
Ashwin - Since the menu for accessing the planning transaction is not available by default in the SAP menu I had to create a role.
Thank you Ajay and Ashwin.
Regards,
Kumar

Why does my cellphone keep saying that estimating time remaining when I try to upgrade the system?

Why does my cellphone keep saying that "estimating time remaining" when I try to upgrade the system?
Is there anyway to fix this situation?

Hi Eric_Sun,
Thanks for visiting Apple Support Communities.
You may want to update your iPhone using iTunes on a computer if your device only shows "estimating time remaining" when you try to update wirelessly:
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you see an error message while updating your device, you can learn how to resolve iOS update errors in iTunes.
You can find these steps here:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
If you are still not able to update, I recommend the steps in this article next:
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Best Regards,
Jeremy

TS2570 How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the loadbar thn

How do i get my mac book back to normal, i attempted a safe boot because my safari wasnt opening, when i choose it on the dock, it just bounces for a while then i get a error message. now when i turn it on it only goes halfway thru the load bar then shutdown?????

Hello, what OSX version?
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

I activated iTunes Match and ever since have been unable to load itunes. When I choose to open the app, a message "library loading" appears but nothing happens.. could anyone help me?

I activated iTunes Match and ever since have been unable to load itunes. When I choose to open the app, a message "library loading" appears but nothing happens.. could anyone help me?

I'm the same! iTunes just keeps crashing!!! I'm still waiting on a response to this...

What will happen when quotation is rejected in the system

when quotation is rejected in the system then what will happen
a. price comparison can't be done
b.still we can make Po's
c. u can PRINT a rejection letter
d. information can be stored in the purchase info record

Hi,
A and C.
Regards,

When I cancel an invoice the system creates automatic print out..

Dear all,
when I cancel an invoice the system creates automatic print out..
How can I fix this issue?
Thanks regards

Use Tcode VF03, display the cancelled invoice.
Provide the cancelled invoice number that is generated on cancellation.
Click on "Goto" in the menu bar. then Goto- Header- Output.
Check whether there is any output present here with status as "Green" light.
If the header output is not maintain, check for item.
Accordingly, check your output determination in tcode VV32"..
Provide the output type mention in canceled invoice.
Based on your requirement, either modify or delete the condition record by selecting it.
Thanks & Regards
J Prakash.

The system failed to flush data to the transaction log. Corruption may occur.

We have a windows server 2008 R2 Virtual machine and we are getting the following Warning Event.
Event 51 Volmgr
The system failed to flush data to the transaction log. Corruption may occur.
Any idea what is wrong with this server? Why this event is occurring?

Hi Jitender KT,
Before going further, would you please let me know the complete error message that you can find (such as a
screenshot if you can provide)? Please check and confirm in Event Viewer if there other related event you can find, such as Event 57 and so on. Meanwhile, can you remember what operations you have done before the warning occurred?
Based on current message that you provided, please run
Chkdsk command to check if you can find error. The issue seems to be related to the storage device. Please refer to the following similar question.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/044b10af-c253-46de-b40d-ce9d128b83d7/event-id-57-source-volmgr?forum=winservergen
In addition, please also refer to the following link. It should be helpful.
http://www.eventid.net/display-eventid-57-source-volmgr-eventno-8865-phase-1.htm
Hope this helps.
Best regards,
Justin Gu

In iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed?

in iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed.

Short answer: They are not resizing, there is no quality lost. The dpi is only set when you decide what size you're printing at
Longer answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

HT201250 I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I

I had to replace the hard drive in my old MacBook. I replaced it. Installed OSX10.6. Then using the system software I reinstalled data from my Time Machine backup. On completion it asked for my password. It is not accepted. I am locked out how I overcome this?
I was already using 10.7. But only had the disc for 10.6.

Sorry I am new to this. Am I in the right area? I am using my iPhone to make contact. I am worried.

How to configure a test sever with the system copy with prd data

Dear All ,
I need to configure a test sever with the system copy with prd data.
Please any one can suggest the step by step process to do the same configure and system copy.
Regards
kumar

Dear All,
I am facing problem in system copy. I want to knoe the way after restore i can move all the data and server data in one drive .
Now the error is resolve by changing the initTAT.sap the value tape to disk but now stuck in the drive for restore it is asking which is not there at os level.
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD33' at location
BrDirCreate-1
BR0253E errno 2: No such file or directory
BR0252E Function mkdir() failed for 'M:\oracle\TST\SAPDATA4\PRD32' at location
TO solve the above problem i have created ad network drive for this but once all the restore will be completed than how i can i move the data form network drive to on drvie.
Please suggest
Regards,
Kumar
Edited by: kumarmoh on Jul 21, 2009 1:43 PM

Write behind cache, DB down, when should the system stop taking new data in

Hello:
We are trying to use Coherence for our custom ESB, which is brokering payloads of various size between consumer and provider applications.
Before Coherence, stopping our DB meant organization-wide outage for critically important business services.
Since we have at least 40G of RAM in production environment, we believe that our app
can use Coherence write-behind option for tolerating at least several hours worth of DB outage.
We are currently using a near cache backed by distributed cache in write-behind mode.
9 business service JVMs (storage enabled=false) use 30 storage enabled JVMs.
IMPORTANT: We need to create an automated alerting facility determining when
amount of unsaved data reaches critical level since DB goes down. This alert should help us decide when our application stops accepting inbound traffic.
It is hard to use QueueSize parameter for that because our payload memory footprint can vary from 1KB to 3MB.
We do not expire any entries in order to enable support queries against the cache during DB outage.
Our experiments with trying various flavors of overflow-scheme resulted in OutOfMemoryError, therefore
we decided to implement RAM-only cache as a first step.
<near-scheme>
<scheme-name>message_payload_scheme</scheme-name>
<front-scheme>
<local-scheme>
<scheme-ref>limited_entities_front_scheme</scheme-ref>
<high-units>100</high-units>
</local-scheme>
</front-scheme>
<back-scheme>
<distributed-scheme>
<backing-map-scheme>
<read-write-backing-map-scheme>
<internal-cache-scheme>
<local-scheme>
<scheme-ref>limited_bytes_scheme</scheme-ref>
<high-units>199229440</high-units>
</local-scheme>
</internal-cache-scheme>
<cachestore-scheme>
<class-scheme>
<class-name>com.comp.MessagePayloadStore</class-name>
</class-scheme>
</cachestore-scheme>
<read-only>false</read-only>
<write-delay-seconds>3</write-delay-seconds>
<write-requeue-threshold>2147483646</write-requeue-threshold>
</read-write-backing-map-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
</back-scheme>
</near-scheme>
<local-scheme>
<scheme-name>limited_entities_front_scheme</scheme-name>
<eviction-policy>LRU</eviction-policy>
<unit-calculator>FIXED</unit-calculator>
</local-scheme>
<local-scheme>
<scheme-name>limited_bytes_scheme</scheme-name>
<eviction-policy>HYBRID</eviction-policy>
<unit-calculator>BINARY</unit-calculator>
</local-scheme>

Good info ... I feel like I need to restate my original question along with a couple of new questions caused by the discussion above.
Q1. Does Coherence evict 'dirty', or 'queued', or 'unsaved' objects for cache configuration provided above?
The answer should be 'NO', otherwise Coherence is unsafe to use as a system of record,
it should not just drop unsaved information on the floor.
Q2. What happens to the front tier of the near+partitioned write behind cache described above when amount of unsaved data exceeds max cache capacity defined via high-units?
I would expect that map.put starts throwing exceptions: cache storage is full, so it should not accept more data
Q3. How can I determine a moment when amount of dirty data in bytes(!), not in objects, hits 85% of
max allowed cache capasity configured in bytes (using high-units param and BINARY calculator).
'DirtyUnits' counter can probably be built with some lower-level Coherence API. Can we use
this API?
Please, understand, that we purchased Coherence for reliability, for making our
system independent from short DB outages, for keeping our business services up
and running when DBA need some time for admin operations like rebuilding an index.
Performance benefits are secondary and are not as obvious for our system which
uses primary keys only and has a well-tuned co-located Oracle back-end.
We simply cannot put Coherence to production unless we prove that Coherence
can reliably hold the data and give us information about approaching crisis
(the cache full of unsaved data).
If possible, forward this message to Cameron Purdy,
who was presenting Coherence to our team several moths ago.
Thanks,
Vasili Smaliak
Applications Architect, Enterprise App Integration
GMAC ResCap
[email protected]

Error when using "inlist operator" in the query filter of Webi 3.1

Hi,
We are currently in the process of migrating Deski to webi (BOXI 3.1).
The problem is, Deski is using the "inlist" operator which is working fine but after migrating to webi the inlist operator in the query filter is throwing the below error,
*Error Message :*
A database error occured. The database error text is: ORA-00907: missing right parenthesis. (WIS 10901)
Appreciate your assistance on this.
Thanks !
Regards,
Perialt

Karthik ,
Yes I am seeing an additional paranthesis in Webi SQL query.
For example plz consider the product table below,
SELECT
Product.ID,
Product.Name
FROM Product
WHERE
Product.Name IN ( @Prompt('4) Name:','C','Product\Name-M',multi,free) )
As a work around in Custom SQL, If I remove the paranthesis the below query is running fine in webi
SELECT
Product.ID,
Product.Name
FROM Product
WHERE
Product.Name IN @Prompt('4) Name:','C','Product\Name-M',multi,free)
But I want a permanent solution.

When i choose operation mapping the system prompt no suitable date fund

Similar Messages

Maybe you are looking for