When I choose SHARE for a photo on my iphone that i just updated to ios 7, why do I have to keep opening the icloud control on my pc, uncheck and then recheck photos for them to then appear in icloud photos on my pc?

Before ios 7, photos that I took on my iphone 5 would go from camera roll to photo stream on my phone and then show up in my Photo Stream folder on my pc within a few seconds. Now they no longer auto sync to my Photo Stream folder on my pc. I know about the new iCloud Photos folder in my pc but the photos do not show up until I manually open the iCloud panel, uncheck the photos button, hit apply, then recheck the photos button and hit apply again. Why do I have to do all of this when it used to be automatic? Is the old Photo Stream folder on my pc dead now? Anyone else having this problem?

I HAVE RESOLVED THIS!! The problem was that I was signed in to iCloud on my iphone with an old Apple ID and using a different Apple ID on my pc. I signed out of iCloud on my phone, then re-signed in with the same id as the iCloud on my pc. Presto chango. All is well.

Similar Messages

My iphone 6 plus after updating to IOS 8.2 the touch id doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' .

my iphone 6 plus after updating to IOS 8.2 seems to have a problem with the touch id witch doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' . I have multiple fingerprints and none of them appear to work.

Hi Giannis,
If you are having an issue with Touch ID not functioning as expected, I would suggest that you troubleshoot using the steps in this article -
Use Touch ID on iPhone and iPad - Apple Support
Start with the section titled Clean the Touch ID sensor and then Get help with Touch ID.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

Is there a way to recover my photos on my iphone that has not been backed up. It was dropped in water and will not turn on. I have had it in rice for 24 hours. Thank you

Is there a way to recover my photos on my iphone that has not been backed up. It has been in rice for 24 hrs.
Thank you !

No since thay have not been backed up. Hopefully the phone will work long enough after the 'rice treatment" for you to recover the phone and do a backup. The rice sometimes does not work. Good luck.

I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?

I'm trying to play this new movie i bought with my macbook but every time i put the movie in it makes a noise and only stays there for 6 seconds then ejects itself how can i fix this problem?

Restart your phone,hold the home button and the off button down till the apple symbol comes up. If that doesnt fix it , you need to do a restore in itunes by connecting to itunes , click on your phones name to the left, then click restore in the center of the screen and restore from backup.

All of my photos now have the same photo when I look at them in the viewing area. I have to actually open the photo itself to see the actual photo. this makes it impossible to work with the photos in iphoto. Help!

All of my photos now have the same photo when I look at them in the viewing area. It makes it look as though all of my photos are the exact same! I have to actually open the photo itself to see the actual photo. this makes it impossible to work with the photos in iphoto. How can I return it so that I see the photo itself in the preview area? Thank you!

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. This can take three or four goes.
Regards
TD

Why does mountain lion "bunch up" all my microsoft office documents that I have open when I hit f3? When I had snow leopard for example, if i had 4 or 5 different microsoft office documents open at the same time I could hit f3 and easily pick one of them

Why does mountain lion "bunch up" all my microsoft office documents that I have open when I hit f3? When I had snow leopard for example, if i had 4 or 5 different microsoft office documents open at the same time I could hit f3 and easily pick one of them.
Notice how in the photo, I can't identify which MS office document I would like to switch too. Perhaps since the Dashboard and Desktop windows are at the top of my screen now Apple doesn't let you have all the applications take up the full screen and be sized individually so that you can have a better idea on what to pick.
I like the idea of grouping to an extent... If you have a bunch of random things it was hard for me to decifer between what was safari, chrome, or word. But now that they grouped them like this, if you have multiple pages of one program running, you can't switch between those pages easily like before.

If I wanted to open any of my Applework documents I had to open them one at a time and resave them with pages. This could take weeks.I have 1000s of apple work documents.
You don't have to open and re-save every AppleWorks document you have right now. Just wait till you need one, then do it. The documents aren't going anywhere.
Am I dealing with Microsoft? This was a BIG surprise to me that Apple would release an OS without testing all programs.
Frankly, it is not Apple's responsibility to ensure compatibiltiy with every piece of software available for OS X. That is the responsibility of the software vendor. Lion has been available to developers for several months before it's release, so Microtek had plenty of time to update their software. Yet they did not. How is that Apple's fault? I think Apple was very generous to give you a refund for Lion.
I'm not trying to belittle your frustration but I do think your ire is misplaced.

I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey. Is there any way to convert them?

I have an iMac running Mavericks 10.9.4 I also have about 30 Kodack photo CDs that I wish to convert from PCD to Jpeg but Mavericks will not see the files, they are grey. Is there any way to convert them or must I do it on another machine?
Kaibil

iPhoto used to support the PCD format up to a few years ago. It's extremely frustrating that Apple decided to no longer support this format and now I'm directed to pay nearly $40 for an app that will (GraphicConverter 9). Did Lemke Software make a deal with Apple so we'd have to pay a premium for a very overpriced converter? And, how are decisions like this supposed to encourage the use of iPhoto?
Apple users already pay a premium to use a Mac. Obstacles like these eventually destroy loyalty to the Apple brand. Just ask Microsoft how their back room deals that exploited their customer base worked out for them.

HT201365 I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

I just updated to ios 7 on my iPhone 4 how do you turn the apps off when your not using them? The old way of double clicking and then pressing the app until a red minus button comes doesn't work it opens it back up!?

Double click home button, then swipe up on app picture (not the icon itself)

I have loads of photos on my iPhone that have been backed up on iCloud how do I see them on my iPad

I have loads of photos on my iPhone that have been backed up on iCloud how do I see them on my iPad

Photo Stream - http://www.apple.com/icloud/features/photo-stream.html
iCloud: Photo Stream FAQ - http://support.apple.com/kb/HT4486

My iMessage won't let me select my phone number for 2 days now, i have tried everything. My phone number is a grey colour and I can't get a tick to appear beside it. I have signed in and out,turned on and off!HELP please!

As far as I know, iTunes will still not change anything until you click on Apply in the lower right corner. I fiddle with my settings all the time - just so I can get a sense if what to expect should I make any changes - and I have never seen anything happen to my configuration unless I click on Apply in the lower right corner of iTunes. Not only that - you have turned off auto sync so as far as I know you still have to click on sync or apply in order for the iPad to sync with iTunes.
That doesn't mean it will not happen, I've never seen it happen - is all that I'm saying. I'm sorry but I'm not sure what will happen, but the only reason that I can of why the apps will not transfer is because of the manual manage setting. I could be wrong about that as well.
Look at this discussion - which I have referred quite a few users to read. I know this process has worked for a number of people that have read it and used the instructions in it. Maybe we are missing something - what that would be - I'm not quite sure, but take a look.
https://discussions.apple.com/thread/3305461

Why does my mac book keep shutting down? I mean it's on and then off suddenly

Why does my mac book keep shutting down? I mean it's on and then off suddenly

Do any informative dialogs appear after you restart it?
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on Mac portables with a battery you can remove
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery (to remove the battery - click here: MacBook or MacBook Pro).
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Still having problems? Replace steps 6 and 7 with the following:
Reconnect just the MagSafe power adapter.
Press the power button to turn on the computer,
Then reconnect the battery.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light will cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the Ipad to the Iphone and not the other way around.

How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.

The devices are not designed for transfer of that kind. Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.

How do I delete photos from my iPhone that have been downloaded from my pc?

I am not sure how to delete photos from my iPhone that I have downloaded from my pc or that I have taken with my iPhone (on my camera roll)

"I am not sure how to delete photos from my iPhone that I have downloaded from my pc"
The same way you put them there. The sync process. open itunes, connect iphone, select what you want on the iphone , sync
"or that I have taken with my iPhone (on my camera roll)"
You can delete them when you import the photos to your computer - using whatever softare that you import them with or you can go to the pics and hit the trash can on the bottom of the screen.
iPhone User Guide (For iOS 5.1 Software)

HT1386 my iphone does not sync with itunes on my second authorized computer, please help. i changed the first authorized computer in May 2012 and have been using the second authorized computer since then but it cannot sync - please help!!

my iphone does not sync with itunes on my second authorized computer, please help. i changed the first authorized computer in May 2012 and have been using the second authorized computer since then but it cannot sync - please help!!

"I was thinking I would just connect my iPhone and all of my music and other stuff would transfer to the new computer. "
Not true. The music and pic sync is one way - computer to iphone. The only exception is itunes purchases. Without syncing: File>Transfer Purchases
You really should transfer everything from the old computer, or your backup copy of your computer. Since you do not have access to the old computer, then use your backup copy of the old computer.
If for some reason you have failed to maintain a backup copy of your computer ( not good), then you would have to transfer itunes purchased as described earlier. Any other itunes content would be lost.
You can e-mail photo library pics to yourself, but they will not be of the original quality.
Before syncing, enter at least one unique contact and calendar entry on the computer. When you first sync, then you should get the option to merge the data.

I installed elements 12 on a Win 8.1 computer and moved all my photos from my old XP machine. I updated to elements 12.1. Now, many/most of my photos will not open because I do not have "permission" to open the files. How do I fix this so I can work wi

I installed elements 12 on a Win 8.1 computer and moved all my photos from my old XP machine. I updated to elements 12.1. Now, many/most of my photos will not open because I do not have "permission" to open the files. How do I fix this so I can work with MY photos?

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

When I choose SHARE for a photo on my iphone that i just updated to ios 7, why do I have to keep opening the icloud control on my pc, uncheck and then recheck photos for them to then appear in icloud photos on my pc?

Similar Messages

Maybe you are looking for