When I click on a link I get sent to a bunch of other sites and the problem doesn't occur when I use windows internet browser.

When I click on a link, whether e-mail, yahoo or other search engines, E-bay, Amazon, etc. I get sent to another site. If I click back and then re-click on the original site I get sent to where I wanted to be. While I am browsing on a web page of any of the above, or other sites, I sometimes get a voice ad or possibly a video, but I can't locate it or turn it off. This does not happen when I use windows internet, or it's Google chrome internet, only with Firefox. I have used Ad aware, and Mal-bytes anti-virus but they come up blank.

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Similar Messages

  • I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

    I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
    Here is an image of the issue
    http://www.flickr.com/photos/67839707@N08/8884847081/

    I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
    Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
    Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

  • When i click on a link, i get a blank page saying "enter web address

    when i click on a link, i get a blank page which says
    "enter web address"

    Is this any link in any page, or one particular link in a particular page?

  • I deleted firefox because of malware; I want to reload it, windows or explorer blocks it before begins; I tried the forum, but when I click on a link I get spammed: I am using Trend Micro Titatanium, but it doesn't seem to be working, can you help me?

    I deleted firefox because of malware;I want to reload it but windows or explorer blocks it. I tried the forum but when I click on a link I get spammed. Can you help?

    You are not addressing Apple here. We are all just users like yourself
    lost/stolen                                     
    No app on the iOS device is required.                           
    - If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
    - You can also wipe/erase the iOS device and have the device play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
    - There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • When round tripping with photoshop cc, i get a saved psd file with my original raw,the problem is these are high file sizes and taking a lot of space,can i stop this?

    when round tripping with photoshop cc, i get a saved psd file with my original raw,the problem is these are high file sizes and taking a lot of space,can i stop this?

    That's not the workflow that I use. I have my Lightroom preferences set to create TIF images when going to Photoshop. I keep the original raw file and the TIF image (usually reduced to an 8-bit image) and only export JPEG's when they are needed to send to a lab or to send to someone over the Internet. JPEG files are highly compressed. I only create them when they are needed, and they are discarded as soon as they have been used for their intended purpose. I keep the raw file and the Photoshop-created TIF in my library. This requires extra disk space. But I always have the highest quality files available.

  • I just recently updated to the OS X soft wear and every time I go on iPhoto or iMessage my computer shuts down. This problem doesn't occur when I log into my laptop as a guest. I have a Mac book pro made in 2010.

    I just recently updated to the OS X soft wear and every time I go on iPhoto or iMessage my computer shuts down. This problem doesn't occur when I log into my laptop as a guest. I have a Mac book pro made in 2010.

    Any error message?

  • When I click on a link within a Web page, Firefox just spins until I reload the new page.

    When I enter a new URL or select a bookmark, Firefox loads the page promptly. When I click on a link within that page to go to another page, the Firefox tab green spinner often just spins and spins. It either takes a very long time to load (2 or more minutes), or never finishes loading. It's usually a greater problem when I "Open a link in a new tab". I can usually make the new page appear by reloading, either clicking the red X and the circular arrow, or Ctrl-F5, etc.

    Try the Firefox SafeMode to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    * You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Since update, when I click on iTunes store I get message that iTunes has stopped working fault module StackHash_e8ad Problem event BEX

    Since updating iTunes, I can open iTunes, view my apps, music, movies, etc. But when I click on iTunes store I get an error message that iTunes has stopped working. The fault module name: StackHash_e8ad Problem Event: BEX. Already tried reinstall several times and tried all the tips and advanced tips on the iTunes troubleshooting page. HELP!!!

    Try gn_id's suggestion from the following post:
    Re: iTunes 11 crashes when opening the store - no error message

  • Nothing happens when I click on send link & I have changed my mail app. For some reason it just doesn't do anything any more when I click on it. I click & nothing happens.

    When I click on send link under file or even when I right click on the main page & scroll to send link nothing opens. I have my mail settings under tools & app set properly but still nothing happens. I can send anything with send link

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • Sometimes my screen starts to move on my iMac.    It's like it's trying to turn the page and it gets off center and the mouse doesn't work when it happens.  It usually lasts about 15 seconds or so and happens often.

    Sometimes the screen on my imac starts to shake like it it trying to "go to the next page".   When this happens it usually freezes up for 15 seconds or so and the mouse doesn't work.

    Have you tried a hard reset of the iPod to see if that helps?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear. 
    Otherwise, work through each of the troubleshooting suggestions in this Apple support document as necessary.
    iOS: Troubleshooting Wi-Fi networks and connections
    B-rock

  • 11.0.10 Update Issue -  Problem saving documents - getting message "This document could not be saved.  There was a problem reading this document (21)."  The PDF documents are being created by Esker VSIFax and the problem is only occuring with updated vers

    Our IBM Unix system uses a program called VSIFax (Esker) to create PDF documents such as invoices.  Users that have updated to Acrobat version 11.0.10 can open the PDF but then when trying to save the document the get a message "This document could not be saved.  There was a problem reading this document (21)."  The problem is only occuring with updated version 11.0.10 (11.0.9 works fine).

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

  • When I click on some links, I get re-directed to a spam website instead of where I wanted to go

    Especially when using google, I will click on a link to a webpage, but instead of going to that webpage I am being redirected to some other webpage that is trying to sell me something.

    Do a malware check with a few malware scan programs.<br />
    You need to use all programs because each detects different malware.<br />
    Make sure that you update each program to get the latest version of the database before doing a scan.
    * http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    * http://www.superantispyware.com/ - SuperAntispyware
    * http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    * http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
    * http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

  • When I click on a link within a website to open a document (word, excel etc.), Firefox doesn't open it. Even when I tell it to open in a new window, it just opens a blank tab labeled "untitled."

    When I try to click on a link to a document within a website, that document doesn't open like it should. For instance, if I go to the census website and click on a link to open an excel spreadsheet, Firefox doesn't do it. It usually does nothing; if I tell it to open in a new window or tab, it just opens a tab labeled "untitled" that ends up being a blank page.
    == This happened ==
    Every time Firefox opened
    == 2 months ago?

    Go to Tools->Options->Apps
    Here you should see two columns: Content Type on the left, Actions on the right.
    Find and select excel spreadsheet or any other content type in the left column. There should be a corresponding action in the right column. What is it? You can use the drop-down list to select the option you want:
    Always Ask - Firefox will ask each time: What do you want to do with this file?
    Save file - Firefox will save this file to your computer
    Use - Firefox will give this file to the program to open it
    In case of saving, Firefox will either prompt you every time where you want the file to be saved, or save it to the default location. It depends on the preference in
    Tools->Options->General->Download

  • Why is it that now, when I click on a link for a website I've saved, it does NOT show the URL in the address bar? I can't drag it to an email to share the link.

    Why is it that in these newer versions of Firefox (I have 21.0), when I open a link that I've saved, it does NOT display the URL in the address bar any more?
    I can't drag and drop the link into an email, and I can't see the actual web address I'm connected to for reference OR for security purposes. Why was this changed?
    It becomes necessary to reveal the properties of the URL link I've saved, using the Windows "Properties", then copying and pasting the URL into the Firefox address bar, before I can do anything with it.

    No changes have been made and no problem with extensions has interfered with the URL appearing in Firefox before. Only with the last few new versions of Firefox has this cropped up. Also, the link opens correctly - it just doesn't display the URL in the address bar, instead it just reads (in gray) "Search or enter address." How could another extension interfere if Firefox is the sole program associated with .htm, .html files?

  • HT1364 when I click on consolidate files I get a message that says "Copying files failed. The required file could not be found" what does this mean?

    I've been encountering problems with this from the beginning, when I realized that my iTunes media folder was engulfing most of my storage. I bought an external drive, followed all the steps, and since then I've lost 1 movie and several songs, and now I've lost some magical file that means I can't move anything now. The files are still on my computer (I moved them back after losing the movie and songs) and I can't move the media files. It does create the folders for me all the way down to the artist and album BUT when I open that last folder it shows me NOTHING! please help this is incredibly frustrating.

    1. delete this songs from your liblary
    2. go File -> Add File to Liblary... (Ctrl+O) or File -> Add Folder to Liblary

Maybe you are looking for

  • Error while adding attachments using attachmentLink

    Hi All, I am getting the below error sporadically while i add an attachment using my custom UI. The OA passivation framework coding standard has been violated. The view object with full name, xxCustomAM.oracle_apps_fnd_server_OAAttachmentsAM.Attach_1

  • Error :Display document : Update was terminated.While displaying the PO

    Hi All, I am creating a PO with respect to contract in SAP 4.6C system using ME21.PO is getting created successfully.But when I want to display the same in ME23 it giving me a message 'Display document : Update was terminated'.( an express message is

  • How to append msg from second thread to main GUI thread?

    I am facing a problem which I cannot seem to solve. It involves Swing and threads. I have a main GUI running on swing. And it retrieves database information and displays it. On the same GUI I have a JTextArea box which I need another thread to update

  • Filters not working with Tomcat 5

    Hi, I've attempted to implement a filter in my JSP program. Below is the web.xml I'm using and the filter implementation. The problem is doFilter simply isn't being called. init is called because when I do an ant reload it print my error into the log

  • Problem in collections:

    I am having a a problem here: Map<Integer, String> map = new ArrayList<Integer, String>(); Collection<Integer> keys = map.keySet(); for(String id : categories) {      if(Collections.binarySearch(keys, Integer.valueOf(id)) > 0) { some code...} While c