When I click on browse to add a picture in an email in hotmail, it does nothing?

since downloading firefox/mozilla I cannot attach a picture in an email. I click on browse to pick the photo and nothing happens.
== This happened ==
Every time Firefox opened
== I switched from IE over to firefox

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About

Similar Messages

Error 500 -Internal Server Error when I click on browse catelog button on Reports and Analytics in Fusion

Hi
I am unable to access Reports and Analytics . It throws a Error 500 -Internal Server Error when I click on browse catelog button on Reports and Analytics in Fusion
I have all the required roles and also BIADMINISTRATOR ACCESS still I am unable to login to Reports and Analytics. I have cleared the cache also.
My collegue who has the same roles is able to access it.
Regards
Avinash

I created the showModule.xhtml in the web.view.module\src\main\resources folder and test the application and Now I'm getting the error in both deployment ways.
a) Local deployment: Same result
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
b) Remote server:
Error 500--Internal Server Error
com.sun.faces.context.FacesFileNotFoundException: /showModule.xhtml Not Found in ExternalContext as a Resource
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:232)
at com.sun.faces.facelets.impl.DefaultFaceletFactory.resolveURL(DefaultFaceletFactory.java:273)
Please check the below screenshots for the mappings captured in the properties window.
http://imageshack.us/photo/my-images/5/srwebviewmodule.png/
http://imageshack.us/photo/my-images/811/eclipseexplorer.png/
http://imageshack.us/photo/my-images/521/cdiandrichfacesear.png/
http://imageshack.us/photo/my-images/90/cdiandrichfaces.png/
Thanks,
Vijaya

When I click on Browse in creating simple page it doesn't open External protocol and Launch aplication

When I click on Browse at the Kompozer and want to create a web page then ''the Browser doesn't open the External Protocol Request for Launch application". What i need to do? How can I know that mozilla Firefox program has been downloaded without error?
I am a beginner and would need step by step instruction with the help of video.Thank you.

Go to Tools->Options->Apps
Here you should see two columns: Content Type on the left, Actions on the right.
Find and select excel spreadsheet or any other content type in the left column. There should be a corresponding action in the right column. What is it? You can use the drop-down list to select the option you want:
Always Ask - Firefox will ask each time: What do you want to do with this file?
Save file - Firefox will save this file to your computer
Use - Firefox will give this file to the program to open it
In case of saving, Firefox will either prompt you every time where you want the file to be saved, or save it to the default location. It depends on the preference in
Tools->Options->General->Download

I cannot upload attachments to e-mails. When I click on browse in the attachment pop up nothing happens

I cannot upload attachments to e-mails. When I click on browse in the attachment pop up nothing happens, I cant even type in a document address in the file location box
== This happened ==
Every time Firefox opened
== I downloaded the latest version of firefox

Again, where are you seeing the date?
Select one of the imported photos, type Command + i and check in the iPhoto Info drawer to see what the EXIF capture date is for those photos.
If the date is correct then you're looking at the file created or modified date and not the EXIF capture date that's embedded in the image file itself.
OT

How to get login page when user clicks on browser's back button

Hi,
I am using struts framework.
I have set property nochache=true in response header of all pages.
So, browser does not caches my pages.
Now,when I am clicking on browser's back button, I am getting following message..generated by browser.
Warning: Page has Expired The page you requested was created using information you submitted in a form. This page is no longer available. As a security precaution, Internet Explorer does not automatically resubmit your information for you.
To resubmit your information and view this Web page, click the Refresh button.
Instead of that I want to show user a login page, when it clicks on back button.
Can anyone help me?

Hi,
I agree with your suggestion.But my query is,
If you have seen many credit card or banking websites,generally when user clicks on browser's back button,its redirectly user to login page of it for security reasons.
I want to implement that kind of functionality.So need help on that point

I am trying to INSTALL the free trials of AI and PS when I click on the link to install it goes to another page says installing but nothing is happening. I have the FREE TRIAL Creative Cloud Membership.

I am trying to INSTALL the free trials of AI and PS when I click on the link to install it goes to another page says installing but nothing is happening. I have the FREE TRIAL Creative Cloud Membership.
I am getting very frustrated with this. When I try to install the Creative Cloud thing it asks me to pay even though it says try for free.

Hi Mirrormonolith,
Please try the following steps assuming its a MAC:
1) Open Activity monitor and Force quit Adobe CEF Helper, Creative cloud, Adobe IPC Broker & Crash Deamon if available.
2) Try to open, if doesn't work then go to Applications>> Adobe Creative cloud>> Right click>> Get Info>> Click on the Add sign>> Select the user you are logged in>> Give Read and write access.
3) If that doesn't work then enable the root user and launch to update there, check this link on how to enable/sign in to root user Enabling and using the "root" user in Mac OS X
Please let me know of that worked.
-Ankit

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album.

I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

When I click on the iPhoto a gray appears along with the perpetual wheel but does not load. Any recommendations?

When I click on the iPhoto a gray appears along with the perpetual wheel but does not load. Any recommendations?

Assuming you're using iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

I cannot open files attached to an excel spreadsheet. I am using office for mac 2011. when double clicking object I only get the picture modifier windows.

I cannot open files attached to an excel spreadsheet. I am using office for mac 2011. when double clicking object I only get the picture modifier windows.

Preventing Microsoft Office to open recent documents at startup in Mac OS, Please see:
http://www.frenchguys.com/wordpress/preventing-microsoft-office-open-documents-startup-mac-os-lion/
It seems that the solution works for most people.
In a terminal, enter the following:
defaults write com.microsoft.Excel NSQuitAlwaysKeepsWindows -bool false

I'm having trouble importing pictures from the internet....when I drag the picture to the icon, it gives me the option to import all duplicates. Even when I click "NO", it STILL imports every picture I have imported AGAIN, including the new one! WHY??

I'm having trouble importing pictures from the internet....when I drag the picture to the icon, it gives me the option to import all duplicates. Even when I click "NO", it STILL imports every picture I have imported AGAIN, including the new one! WHY??

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

Subject: Migration
I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

Subject: Migration
I migrated all data from old PC to new and iTunes successfully transferred to new PC. When I click on a song it says it cannot locate the original. How does one map iTunes file to iMusic to enable play from original files ?

HT6104 Safari acting strange multi add pages open when I click a browser link.

Click a browser link and get the page I wanted as well as one or two additional add type pages. Also the preferences general page keeps switching from how I want new windows and tabs to open as well as how I set the homepage.

Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones.
(120285)

The add-ons tool window hangs when I click Options for any add-on

This morning, IE8 showed up as the default browser. Also, the Lastpass button was missing. When I click Tools-Add-ons and click the Options button for any add-on, the window hangs. Sometimes it hangs FF as well.

I resolved this by using a different add-on.
I was issued a new computer at work. It's a Windows 7 Dell E6410, and I was configuring a new installation of Firefox for it. I had downloaded the same URL shortening tool that I used on my old Windows XP IBM T60 computer. That add-on had the hang when you click on "Options" from the Tools > Add-ons menu. After uninstalling the add-on, I searched for a different URL shortening tool, and this one did NOT produce the hang.

I cannot open a new tab when I click on the + to add a new tab so I can't have multiple tabs open. How do I fix this problem?

On my home page, I have it up and I want to open a new tab. When I click to open a new tab, nothing happens. How can this be fixed?

Hello lsmalls787, '''try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
thank you

Can't find print window to set my printer when I click on the printer add on icon

My Epson printer is set as default printer. I am unable to find the print window to add my printer to firefox when trying to print from the add on icon.

'''{ Ctrl + P }''' then select that printer from the Print - Name dialog drop-down. Then print the page.
"last used" is the default for Firefox - doesn't go by the system default. setting in the operating system

When I click on browse to add a picture in an email in hotmail, it does nothing?

Similar Messages

Maybe you are looking for