When I click on ping, I can't do anything? Help

My ping doesn't do anything. It just says to download ITunes 10. Then when I try it says I already have it?

Can you see the ping sidebar after you've logged in?

Similar Messages

  • My 'clear history button is not working. When I click on it it doesn't do anything and the letter are gray instead if blue like usual. I've gone to every type of settings I can bit I don't know how to fix it. Please help .

    My 'clear history button is not working. When I click on it it doesn't do anything and the letters are gray instead of blue like usual. I've gone to every type of settings I can think of but I don't know how to fix it. Please help .

    T
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • I am saving a video on iMovie directly to my external drive this video I'm saving is 4 hours long! when i click save nothing happens  can you please help?

    i am saving a video on iMovie directly to my external drive
    this video I'm saving is 4 hours long!
    when i click save nothing happens
    can you please help?

    Michael: are you still using an old version o0f PSE (e.g. PSE V4)? Problems similar to the one that you described are relatively frequent in old PSE Versions ( I was suffering a lot from them)..... and there are quite seldom in newer PSE versions.  Unfortunately, I do not remember which PSE Version became much better in this area (was it V5? or V6?)
    If using an older PSE version and encoutering often the problem: consider to migrate to a newer PSE Version..

  • I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image"  Help!

    I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image"  Help!

    More information about this issue can be found here:
    https://forums.adobe.com/thread/1672655
    A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
    Then download each of the individual updates and run them sequentially. 
    I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
    You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
    http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
    Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
    Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
    Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
    Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
    Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
    Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
    Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
    Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
    Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

  • When I start a phone call, noboby can hear my voice . Only when I click on speaker  voice can be heard at both ends.

    When I start a phone call,nobody can hear my voice and viceversa. Only when I click on speaker , voice can be heard at both ends.

    Return the darn thing!
    Why do you & we accept a phone that does not work 100%
    We should be discounted the non working percentage, or simply get a new working one.
    Would you accept a saucage with a rotten end, and hope they would treat it with enough chenichals to make it taste and look good?
    The problem seems to me a hardware problem, and may be poor assembly. Noticed that incoming calls on my first 4s when vibrator was on, made an extra vibrating noise - i.e. loose speaker, printboard or what do I know.
    This does not occur on the phone I purchased yesterday, waiting for the other at the repairshop.
    Does Telenor and Apple think I will accept the repaired brand new phone?
    NOT!
    TCB

  • TS1398 Any idea to troubleshoot my wi-fi, under settings i can see my wi-fi button but when i click on it i can't put it on (hanging)?

    Any idea to troubleshoot my wi-fi, under settings i can see my wi-fi button but when i click on it i can't put it on (hanging)?

    You need to contact the people who administer the networks to get the passwords for the networks. If there was such an app as you are asking for then passwords for wifi networks would be worthless.

  • Hi I'm using Captivate 7 in Windows Vista. I can't insert characters on my slide. When I click on "Insert - Characters" nothing happens. Please help!

    Hi I'm using Captivate 7 in Windows Vista. I can't insert characters on my slide. When I click on "Insert - Characters" nothing happens. Please help!

    Go to /Library/Internet Plug-Ins.
    If you see the PDF Browser Plug-in, move it to the Trash.

  • I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how.  I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click.  Help?!!

    I want to transfer an audiobook and a movie from my MacBook Pro to my iPhone 4S, and can't figure out how.  I went to "Help" and it said after connecting the two devices I should "Click Apps," but I can't find anything labeled "Apps" to click.  Help?!!

    If you have iTunes 11 on your Mac then you can enable the left-hand sidebar via option-command-S, that might make it easier to navigate.
    Connect the phone to your Mac and select it on that left-hand sidebar, and on the right-hand side of the screen there should be a series of tabs which you can use to select what to sync to the phone. If it's an audiobook then it should appear on the Books tab for selecting/syncing, and films will be on the Movies tab. When you've got the audiobook on your phone you should get an Audiobooks option in the Music app (you might need to tap the '...' tab at the bottom of the Music app to see it).

  • TS3274 My IPad button disappears in Itunes (updated) when I click on it, now I cannot do anything.

    My IPad button disappears in Itunes (updated) when I click on it, now I cannot do anything.

    Bingo! Thank you so much for your help, I was ready to give this thing to my wife and buy an Android unit...

  • When I click on iTunes I can't find store so I can change card details?

    When I click on the iTunes icon I can't see where to click on store so that I can change my bank card details. Thanks

    Changing your account information using an iOS device:
    Tap Settings on the Home screen.
    Tap iTunes & App Stores.
    Tap on your Apple ID. (If you are not signed in, enter your Apple ID and password, and tap Sign In.)
    Tap View Apple ID.
    Enter your Apple ID password.
    To update your name, billing address, or payment information, follow these instructions:
    In the Edit section, tap Payment Information.
    Update the information that you want to change.
    Tap the Done button when finished.
    http://support.apple.com/kb/ht1918

  • I can access Hotmail, but unable to access messages when I click on them, nor can delete, etc. when I click on

    When I go to MSN home, I sign in, go to Hotmail account and can get to my inbox, etc. However, when I click on a message I get no response; nor do I get a response when I click on another folder; or, when I check a message and try to move or delete it, I get no response. I recently switched computers (from a Mac G3 to Mac G4, same OS 10.3.9) but that doesn't seem to be the problem as I have been able to retrieve other sites and data as before.
    == This happened ==
    Every time Firefox opened

    Hello Jim.
    Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    As for your issues, let's see if the sites aren't simply having problems with such an old version of Firefox.

  • When I click inspector, all I can see is the layout inspector

    I am trying to adjust the line spacing on my pages document, but when I click the inspector, all I can see is the layout. I cannot make the text inspector open. How do I do this?

    Nope. I tried opening a new inspector window, and sometimes it opens the document inspector, but there are no icons or buttons to toggle between text, graphics, etc. But then if I click on the document icon, it switches to layout and I'm stuck in that mode without options to change to a different inspector.

  • I keep getting a message that reads Introduction: A security and stability update for Firefox is available - 3.6.15 and when I click to update it can't connect to the server. What's wrong?

    I'm using Mac OS X version 10.6.6. The message strongly recommends that I apply this update for Firefox as soon as possible but when I click Update Firefox, it seems to try and update but never really gets started.

    * Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install.
    * Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • Two weeks ago, Yahoo took over my homepage when I click Safari. I can't find how to eliminate it!!

    Two weeks ago, Yahoo took over my Safari homepage.
    How do I remove Yahoo from my homepage when I click on Safari?

    I hate all things Yahoo. But regardless of what I set as my Homepage in Safari 7.0 Preferences, it eventually changes to Yahoo. And also changes default search engine to Yahoo. This has happened several times since upgrading to Mavericks.

  • I cannot get iTunes to open or play on my macbook pro. When I click on the icon it doesnt do anything..I get the icon on the top of the screen but the library wont open or show me anything

    I cant get iTunes to open on my macbook pro, when I click on the icon it  shows the iTunes name on the top of the page but the library wont open , and when I click the tabs it doesnt do anything. What can I do? Its driving me insane!!
    HELP!!

    On the iTunes menu bar, click the Window tab. Is itunes selected?

Maybe you are looking for

  • Using both populate global  and manual populating attributes

    Hi, I am using IDM 8.0 with Flat file active sync using following parameters in FF synchronization policy. Populate Global = checked Track Last Processed Timestamp =true Process Differences Only=true My create user process is working fine but I DO NO

  • Creating an expression from JSP using a non-bound variable

    Hi, This should be a simple question. I have an attribute that belongs to a row that is displayed on a jsp page. This attribute, however, is not displayed on the page, but is an attribute in the VO. I have a Set Property Listener on a command button,

  • Having troubles with Checkboxes after upgrade from 2 to 3.1.2

    Hola forum! For some reason, after I upgraded Apex to 3.1.2, all my screens where I have a checkbox immediately followed by an item, that item is now being automatically moved down to the next line (this used to work fine in 2)? So, I hadsomething li

  • After installing Safari 4, Lost my dock and can't open files.

    Hey guys. I've had my Ibookg4 around 5 years, never really had a problem with until today. I installed Safari 4, and after installation it told me to restart, which I did. After it had restarted, I got to my desktop but I had lost my dock, and I can'

  • Best Switch to use for Link Aggregation

    Looking to buy a new switch and was hoping that someone is already doing link aggregation on a current switch. Looking for 48 ports, I have a lot of Xserves. What model have you had the best luck with? THX