When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".

Hi Team
Please help me with this.
Error : When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".
Version : 29
OS : windows 2003
Any suggestions ?

Thanks for the reply !
At this moment i cannot upgrade this to next version. So can someone suggest me the fix for the issue ?
thanks in advance!

Similar Messages

During "Convert Selection to AAC" get "The disk could not be read from..."

Hi,
I'm trying to convert an AIFF file to ACC using the "Convert Selection to AAC" menu command in iTunes 7.6. When I try it runs through the entire conversion but then at the very end an error pops up that says:
"Error occurred while converting the file. The disk could not be read from or written to."
I have never had this issue before but I did just upgrade to 10.5. I tried running "Repair Permissions" in Disk Utility but that did not fix the problem.
Thanks for any help!

I just experienced the same problem. I tried restarting. I tried repairing permissions. I tried excess profanity. Nothing worked. Then I read Diane Wordsmith's response, and when I went to the music folder on my hard drive, I discovered the actual problem.
Long ago, I had moved iTune's music library from my root drive to another internal hard drive. When I went to check the permissions of that folder, I discovered that this internal hard drive only had 27 MBs of empty file space left.
The disk could not be written to not because of a permissions problem but because of a *physical space* issue.
I changed iTune's music library, once again, to another--larger--internal hard drive, and, voila, the problem vanished.
I hope this helps.

The instruction at referenced memory could not be read !!!!!

Hello All,
Can someone please advice on the disp+work.exe error?
I installed Netweaver 2004s ABAP Edition close to six months back and everything was working fine till a few weeks back.
When i click START APPLICATION SERVER
I get the following POP UP errors:-
The instruction at "0x43488c08" referenced memory at "0x43488c08". The memory could not be read.
The instruction at "0x43562646" referenced memory at "0x43562646". The memory could not be read.
The instruction at "0x435624d0" referenced memory at "0x435624d0". The memory could not be read.
The instruction at "0x43567a055" referenced memory at "0x43567a055". The memory could not be read.
The instruction at "0x4351249e" referenced memory at "0x4351249e". The memory could not be read.
The instruction at "0x4355c194" referenced memory at "0x4355c194". The memory could not be read.
The instruction at "0x4353437b" referenced memory at "0x4353437b". The memory could not be read.
The instruction at "0x017cf903" referenced memory at "0x017cf903". The memory could not be read.
The instruction at "0x017cf963" referenced memory at "0x017cf963". The memory could not be read.
Then disp+work.exe STOPS!!
I have UNINSTALLED and reinstalled multiple times, but i get the same error again and again.
Can someone please advice??
This was my previous thread on the same topic(did not find a solution)
Re: disp + work .exe does not START
Computer Configuration:-
Windows XP home SP2
P4 2.4Ghz
2 x 512MB RAM
Thanks


2 GB is still too small especially for 2004s based products (if installing J2EE too, 2 GB is already too small for J2EE only).
Let Windows Manager the pagefilesize!
regards
Peter

Keep getting - the disk could not be read or written to

Had my itouch for just over a week now and updated to 3.1.2 and i was able to sync it once. Now everytime i try to sync i get. the ipod cannot be synced. the disk cannot be read or writtin to. Any suggestions? Im very new to the Apple products.
Thanks

Have you looked at this: http://support.apple.com/kb/HT1207 ?
I sync with a Mac, and repairing permissions is what worked for me...try the Windows suggestions that are in the KB.

I am running a 64-Bit, Windows based LR5, Errors read "The file could not be read"

I have been getting higher amounts of RAW (Nikon) files that are unable to be read. I can see the images, it sits in my drives, its viewable in my camera.
BUT it simply will not work with LR5. I cannot edit or export them. These files are due for an assignment, and I am absolutely frustrated.
Opening the files in "Develop" tab takes ages, and I am talking minutes (5-10 mins) and when it does, it goes into this "the file could not be read" SHITuation. Sorry for the spelling error.
What the hell is wrong, and how do I correct it?

not up with this techo stuff
others better educated will need to know this stuff
which Nikon been uses?
have you been able to process these files in the past
which LR?............LR5
What happens with files from a different camera
Have you tried importing as DNG
Click off a few jpeg files and try those
Sorry, not very helpful, however your answers will help others to help you

When I close Firefox, I get an error That says "The insstuctions at 0x7c911389 references memory at 0x0000010. The memory could not be read

When I exit Firefox, I get an error message that says The instuction at 0x7c911389 referenced memory at 0x000000010 The memory could not be read.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

When I close firefox I get an error message that says:The instruction at 0x7758144 referenced memory @ 0xffffffff, The memory could not be read, how to fix ths?

I get an error message that says , nsAppShell:EventWindow:firefox.exe... Application E...
The instruction at 0x7758e1144 referenced memory at 0xffffffff. the memory could not be read. Click on OK to terminate the program. What's wrong and how do I fix it?

I knew how to do that, sorry. I didn't know if you wanted a copy of each individual report or just the page. Here it is...
Submitted Crash Reports
Report ID Date Submitted
bp-af8afb9c-406f-4843-b5f0-f341c2140704 7/2/2014 7:12 PM
bp-500df430-465f-44ec-9a7e-c34372140702 7/2/2014 4:52 PM
bp-2c14d0a2-b4a2-4eee-a72d-85b912140702 7/2/2014 4:51 PM
bp-2e8bc220-7e16-4291-b3c3-59a7b2140702 7/2/2014 4:50 PM
bp-ea8a52d4-ff08-48f4-b641-539202140702 7/2/2014 4:49 PM
bp-7ff8483e-468a-4324-b788-336e02140702 7/2/2014 4:46 PM
bp-ee0edfa1-f678-428c-868d-1f80b2140702 7/2/2014 4:44 PM
bp-dd32ccd5-4a84-4582-baa9-d731a2140701 7/1/2014 5:29 PM
75d1f4f1-730e-4e6d-a9aa-7bf08527c14e 5/14/2014 7:40 PM
a5d77b9b-5adc-40ed-8926-245f9c1711b2 4/23/2014 6:24 PM
42ef8c1d-dd05-401f-b91c-15633c5080f5 2/17/2014 2:33 PM
0a233130-e0e9-4a78-ac7c-70ce42d07fcd 2/17/2014 2:33 PM
90b4e67a-5655-4dbf-96aa-b1ceb622cffb 2/17/2014 2:33 PM
1222611d-88cd-4c2b-a165-48dc2ae60888 2/17/2014 2:33 PM
921660a9-b14c-4b71-81c0-4864f246f531 2/17/2014 2:32 PM
84c51953-118a-4b16-a65c-5b0472c31885 2/17/2014 2:32 PM
b12c8c12-b5d2-4028-8804-7831fff1e059 2/17/2014 2:32 PM
fa608271-c2c6-4ff2-8fee-dd12d9cddca5 2/17/2014 2:32 PM
110a075b-5209-4b48-98fb-51f6c18747b7 2/17/2014 2:32 PM
f6b7c7f8-edb5-4c8a-9f9d-95cdf9dae28f 2/17/2014 2:32 PM
38df997b-6c08-4b04-9e10-79114e21b087 2/17/2014 2:32 PM
58e8b80b-0482-4df7-874e-e3c051e3a390 2/17/2014 2:32 PM
2649763b-3e51-414c-87a9-c429e2542a1c 2/17/2014 2:32 PM
f3323912-ee94-40ac-9378-891cf8d04454 2/17/2014 2:32 PM
db9a70c3-8de0-4b52-b7f2-999da7fa4584 2/17/2014 2:32 PM
ac6c20aa-fd8b-4068-8fee-777fddba34a9 2/17/2014 2:32 PM
86068336-7d23-42de-ae1e-30c58f38ed20 2/17/2014 2:32 PM
da68f0b9-1b9f-4fc6-b16d-1f7b3e57a111 2/17/2014 2:32 PM
a5a07386-14fb-44e3-aabe-2dcf350980f8 2/17/2014 2:32 PM
3f447cee-1105-416e-9b66-163fcb2f25fb 2/17/2014 2:32 PM
968c04e0-00bd-4489-8ac3-13e2100b0f70 2/17/2014 2:32 PM
84a12490-7aff-43a3-8b18-e596eef73ece 2/17/2014 2:32 PM
8f5bc390-2805-41df-8d60-48c2b6b61816 2/17/2014 2:32 PM
088af5c3-ec72-47a6-be3e-5635daf4bd7c 2/17/2014 2:32 PM
30f469f8-4802-4708-ad13-01b0f69a5087 2/17/2014 2:32 PM
33080078-0b63-4db7-8f06-0ae2547e8118 2/17/2014 2:32 PM
f03a4616-d0bb-41a6-b322-b5edfbaaede8 2/17/2014 2:32 PM
577bb1ab-2f33-4707-b3f5-a89fab3ecdfb 2/17/2014 2:32 PM
e05818d0-59b2-4e32-aa85-88a76401a12c 2/17/2014 2:32 PM
0d6c09fa-bc59-438a-b306-7775f4339846 2/17/2014 2:32 PM
95d256b1-f1d2-4443-99f1-2373246e2c40 2/17/2014 2:32 PM
fa943610-9b45-4e01-ba2e-137fff6b0278 2/17/2014 2:32 PM
1d918c94-c13e-4e1b-89f6-6931e0aa99a8 2/17/2014 2:32 PM
b7a0218c-de80-4a2f-9aea-8df9bda565fe 2/17/2014 2:32 PM
9b9d142f-e411-4529-840d-b0ad9bae57e6 2/17/2014 2:32 PM
cbdc8180-d488-4a74-954a-2b209954cee9 2/17/2014 2:32 PM
b0d7cb88-4f57-4650-8863-d085d7eaa255 2/17/2014 2:32 PM
fc56f033-1b12-4588-8ffb-8742245d8e0b 2/17/2014 2:32 PM
603c27c7-d40e-45bb-8a23-85cd5e3ad974 2/17/2014 2:32 PM
03778c8d-1e07-4532-a692-cc13200c9bd8 2/17/2014 2:32 PM
e8a1bcbd-9109-48a3-9d4b-7ad2c66ba12f 2/17/2014 2:32 PM
5c063da2-6949-44cf-9f8a-12d45e41b053 2/17/2014 2:32 PM
6758ff53-9c38-472f-83b0-466c7d38080a 2/17/2014 2:32 PM
a252f676-f745-415b-b640-5eb8df5cbc6d 2/17/2014 2:32 PM
a0ffc786-3e64-4d41-8518-1545ec39ca90 2/17/2014 2:32 PM
922ea6d5-6204-4a10-8208-68dddef1afcb 2/17/2014 2:32 PM
8bf8a1b9-33ce-48df-9f73-36d09da7d3b2 2/17/2014 2:00 PM

When I Close firefox v34 I get nsAppShell:EventWindow firefox.exe instruction at "0x05d2230e referenced memory at "0x00000004". The memory could not be "read"

Running Windows XP Pro SP3. Changed a monitor today and at some point afterward, every time I close Firefox, I receive the following Error Message "nsAppShell:EventWindow firefox.exe - Instruction at "0x05d2230e referenced memory at "0x00000004". The memory could not be "read". The next time I start Firefox it seems to work normally. I did try resetting Firefox, but no difference so I restored it to a previous session as the Reset eliminated all of my history, bookmarks, etc.

Hello driadmin, go for a clean re-install, this means you '''remove Firefox program files and then reinstall Firefox'''. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from [https://www.mozilla.org/firefox/all/ this page] (full installer) and save the setup file to your computer.
#After the download finishes, close all Firefox windows (or open the Firefox menu [[Image:New Fx Menu]] and click the close button [[Image:Close 29]]).
#Delete the Firefox installation folder, which is located in one of these locations, by default on Windows:
*C:\Program Files\Mozilla Firefox
*C:\Program Files (x86)\Mozilla Firefox
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
WARNING: Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. These cannot be easily recovered unless they have been backed up to an external device! See [[Back up and restore information in Firefox profiles]]. 
Thank you.

When I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both fin

when I start firefox, i get this message ( The instruction at "0x7b9c77a9" referenced memory at "0x7b9c77a9". The memory could not be "read" ) hs anyone any idea why? I have scanned with AVG and something simply called 'Trojan Remover' and they both find nothing.... any advice would be greatly welcomed.. thanks
== This happened ==
Every time Firefox opened
== this morning 22/07/10

Lyall,
I have seen this before, a long time ago (several years), and I cannot
remember how/if we resolved it.
If this is an impotant issue to you, I suggest that you open a case with
BEA support.
Regards,
Peter.
Got a Question? Ask BEA at http://askbea.bea.com
The views expressed in this posting are solely those of the author, and BEA
Systems, Inc. does not endorse any of these views.
BEA Systems, Inc. is not responsible for the accuracy or completeness of
the
information provided
and assumes no duty to correct, expand upon, delete or update any of the
information contained in this posting.
Lyall Pearce wrote:
The title says it all really.
I see other posts getting replies.
This is a rather important issue, I have seen another post with a similar problem.
While not being a show-stopper it certainly raises concerns.
The application works ok until the application exits (in both development and
executable form)
Apparently this did not happen with Tux 7.1
It does with 8, I do not have 7.1 so I have no workaround.
..Lyall

When I start Firefox, I only get the background of my browser in the Firefox window. I already reinstalled it, but that doesn't fix the problem.

When I start Firefox, I only get the background of my browser in the Firefox window. I the normal window for 1 second, but then it changes in only the background window. So without toolbar, or navigation. I already reinstalled it, but that doesn't fix the problem.

Try to disable hardware acceleration in Firefox.
Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
https://hacks.mozilla.org/2010/09/hardware-acceleration/
https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way,

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.

I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key.

I tunes: when trying to burn a playlist I keep getting the message: the attempt to burn a disc failed. The disc could not be read from or written to. I am using version 12

I tunes: I am using version 12 of I tunes. Ever since downloading it I get the message when trying to burn a playlist it says, The attempt to burn a disc failed. The disc could not be read from or written to.
I uninstalled V-12 and then reinstalled it. This enabled me to burn a disc again but after a couple of tries I received the same error message again. Has Apple put out a fix to this problem that anyone is aware of?
Thanks.

Hi rossfrombluffton,
Welcome to the Support Communities! The resource below provides some general things to consider when burning a disc with iTunes. I would also try burning a music CD and a data disc from a different application in the Windows OS and trying a different brand CD just to confirm the issue is not with the optical drive.
Can't burn a CD in iTunes for Windows - Apple Support
http://support.apple.com/en-ae/HT203173
Find out what to do if you can't burn an audio CD using iTunes for Windows. Sometimes an audio disc may not burn as expected. Here are some things to check.
Update iTunes
Download and install the latest version of iTunes for Windows.Check for unauthorized songs
iTunes will stop burning a disc if you purchased one or more of the songs in a playlist from the iTunes Store and the songs aren't authorized to play on your computer. This message should appear: "Some of the files can not be burned to an audio CD. Do you still want to burn the remainder of this playlist? For more information on why some files can not be burned, click below."
To find out which songs aren't authorized, play each song in the playlist. Songs that play are authorized. Songs that don't play aren't authorized. You'll be asked to authorize any unauthorized songs.Make sure your playlist will fit on a single CD
If there are too many songs in a playlist to fit on a single CD, iTunes should ask if you want to burn multiple discs or cancel the burn. This message should appear: "The songs in this playlist will not fit on one Audio CD. Do you want to create multiple Audio CDs with this playlist split across them? This will require more than one blank CD to complete."
If you click the Audio CDs button, the burn will continue and you'll be asked to insert blank CDs until the playlist is completely burned. If you click cancel, the burn will be canceled.
To make the playlist shorter so that it will fit on a single CD, select a song to remove from the playlist and choose Edit > Clear. Repeat this step until the duration of the playlist is between 60 and 80 minutes. The duration appears at the top of the playlist window. Most CD-R discs can hold 60 to 80 minutes of music.
Check how many times you've burned the playlist
An unchanged playlist that contains songs purchased from the iTunes Store can be burned no more than seven times.Additional steps and submitting feedback
Go to iTunes Support to get additional troubleshooting suggestions specific to your optical drive configuration or to submit feedback to Apple.Learn more
For additional troubleshooting, please see these steps:
Additional troubleshooting tips for burning issues
iTunes for Windows doesn't recognize my audio CDs
Last Modified: Feb 3, 2015
Have a good day ...
- Judy

Can't open firefox, get error message: The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read". Firefox won't open at all, not in safe mode or anything. Tried uninstalling and reinstalling, no good, tried creating

Cant' open Firefox at all, not in safe mode either, tried creating new profile, cant' get in to do that, tried uninstalling and reinstalling, switching off and on, nothing works. Get error: "The instruction at "0x00000000" referenced memory at "0x00000000". The memory could not be read."
== This happened ==
Every time Firefox opened
== today. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0)

The solution is easy.
Install "Malwarebytes' Anti-Malware" free edition and use it. This program found malware in your pc. After that clean this malware. Finally instal Firefox again and enyoy it because this installation is correct and clean. Regards.

When I try to open a file in photoshop CS, Elements or Lightroom I get the message "Could not complete request because it is not the right kind of document" This just started happening today.

When I try to open a file in photoshop CS, Elements or Lightroom I get the message "Could not complete request because it is not the right kind of document" This just started happening today. The only thing I have done differently is change my file handling to raw + jpeg on my Nikon 7100.

I downloaded camera raw 8.7 and I am now able to open my raw and jpeg files. Thanks

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enc

Whenever I close down Photoshop CS5 I get the message: "Could not save Preferences because the file is locked or you do not have the necessary access privileges. Use the get info command in Finder to unlock the file or change permission on the file or enclosing folders." What on earth does it mean? How can I stop this message from appearing?

See here:
I cannot save recent images.

When i Close firefox v29 i get The instruction at "0x61201669" referenced memory at "0x0000000050". The memory could not be "read".

Similar Messages

Maybe you are looking for