When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account

When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account. Can anyone help with a solution?

You haven't set up the SMTP (outgoing) mail server correctly. You probably didn't enter your user ID and password for the outgoing server. They are needed even though it says "optional".

Similar Messages

TS2634 when i plug in my supra ekey adapter i get the message "accessory not supported by iphone" and i've had the adapter checked. it's ok

When i plug my supra ekey adapter into my iphone, I get the message "accessory not supported by iphone". I know the adapter works because I took it back to my realtor association and they checked it.

Try cleaning out the phone's dock connector. A soft dry toothbrush or similar.

HT2188 I have an iphone 3GS that keeps getting the message "charging not supported by this device" Dismiss I have tried other usb adapters, car chargers, and directly hooked to the computer and still get the error message. Software is up to date as well.

I have an IPhone 3GS that keeps getting the message "charging not supported by this device" Dismiss. I have tried several different ac adaptors, car chargers and even directly connected to USB on computer and still get the same message. Software is up to date as well. Help!

Clean the dock connector with a soft dry brush.

I keep getting the message "charging not supported by this device" iphone4

i keep getting the message "charging not supported by this device" after ive clean out he port, no water damage and even brought a new apple wall charger
and its for the iphone4

Clean the dock connector with a soft dry brush.

When I click on a mail message in Yahoo! Mail the message does not load even though the status indicates 'Done.'

I'm running v3.6.11 & am using Yahoo! Mail (sbcglobal.net). When I click on an eMail in my Inbox to load the full eMail message, the message does NOT load but the 'status' in the lower left hand corner of the webpage indicates 'Done.'
This is a similar problem to the page not loading that I've seen in the Support Forum

Odd.
Before taking your last suggest I "tested" to see if the problem still existed and it has gone away.
I've not changed any settings.
(Can't remember if the problem is on my work computer or home computer. I'll test the home computer later today.)
Mark

IPhone wont connect via bluetooth to my macbook, gives the message: macbook not supported - what do I do?

Please help, I am trying to connect my iPhone to my macbook via bluetooth - both are discoverable but my iPhone tells me that the Macbook is not supported...maybe a stupid question but why is this?

You might want to have a look at this...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

I restored my iphone 2 to factory settings and now it says the carrier is not supported. what can I do? I bought it from the us years ago and used it in romania and uk.

I have a Iphone 2 bought several years ago from the us, and used it in romania with a romanian number and in the uk. I think it was unlocked in the us by iphone. I did a stupid thing and I reset the phone to the factory settings and now I inserted a lyca sim and it says that The sim card inserted does not seem to be supported. please help me!!!

I'm assuming you're referring to the original iPhone.
More than likely, it was jailbroken or hacked to unlock it.
In the US, all of the original iPhones sold were locked to AT&T. AT&T did not offer unlocking at the time.
The best case scenario is that it has now re-locked to AT&T. Luckily, AT&T now offers unlocking. All original iPhones were sold at full retail. They were not subsidized.
Submit a request here and see if they will unlock it. https://www.att.com/deviceunlock/#/

After update to version 1.1.1 getting the message "Do not disconnect"

I updated my nano to version 1.1.1. After the update the message "Do not dicsonnect" doesn't disappear. I couldn't remove safely the nano from Windows XP and can't see it in iTunes. Restarting the updater doesn't work. Resetting nano doesn't work. Every time I connect the nano to my USB port I get the same message.
Any ideas?
Thanks
Windows XP

Check my "Problems Solved" post above. Helped me...might help you.
Jo Space
Dell Inspiron Windows XP

LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status.

LR 5 two installation. Dektop and Notebook. Notebook changed. LR 5 license deleted. New Notebook, new installation LR 5. Error Message, Key not valid at this status. How can I do for the new installation.

Am 15.08.2014 14:03, schrieb dj_paige:
>
      LR 5 two installation. Dektop and Notebook. Notebook changed. LR
      5 license deleted. New Notebook, new installation LR 5. Error
      Message, Key not valid at this status.
created by dj_paige <https://forums.adobe.com/people/dj_paige> in
/Photoshop Lightroom/ - View the full discussion
<https://forums.adobe.com/message/6642924#6642924>

I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.

I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working. But Windows 7 recognizes the device and I can see my pictures. Same thing happens when I try to put music onto the iPad.

When in iTunes on the computer,my our ipadmshould show under devices.
Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up.

When I tried to download the new version of firefox I get an error message that says "you computer must be restarted to complete an earlier upgrade" when I restart it says the same thing. I cannot use firefox at all at the moment.

When I tried to download the new version of firefox I get an error message that says "your computer must be restarted to complete an earlier upgrade" when I restart it says the same thing. I cannot use firefox at all at the moment. When I try to uninstall in the control panel, the same message pops up.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Mail client says "The Message Could Not be Moved"

10.6.8 server on Mac Mini
doing DNS, AFP, Mail, iCal, OD for 8 users
Clients are all 10.6.8 on Mac Mini
Mail is IMAP
Mail is well behaved 98% of the time
But sometimes, on a client, when I try and move a message fro mmy inbox to another mailbox, it says "the message coudl not be moved to mailbox xxxxx"
If I try again immediately afterwards, it always works
So I doubt it is anything like a corrupt envelope index, because that would result in persistant problems.
It's as if the mail server isn't listening momentarily.
This is a fairly fresh build of the OS from DVD. Previous build did exactly the same ting.
Woudl be very grateful for any ideas.

To verify the server DNS, launch Terminal.app from Applications > Utilities on the OS X Server box and issue the non-destructive diagnostic command:
sudo changeip -checkhostname
The clients would have references only to your local DNS server(s), visible via the client Network Preferences settings. (These DNS server settings are usually either hard-set in the client, or acquired from DHCP by the client.)
You'll want to use Console.app or direct access to the /var/log directory (on the server), and see what gets logged when the mail message move operation fails.
As a preemptive operation, I'd also rebuild the mailboxes involved (on the client(s) involved). I've seen a few mailbox corruptions over the years, but not one that caused this behavior.

When I am writing an email, I get an alert message that says "The message could not be copied or moved to the drafts folder. Writing to the folder failed. To ga

When I am writing an email, I get an alert message that says “The message could not be copied or moved to the drafts folder. Writing to the folder failed. To gain disc space, choose Empty Deleted and choose Compact Folders and try again.”
If I do that, I get a message saying “There was an error copying to the Sent folder,, retry?”
If I retry it sends the uncompleted email. All I can do is keep deleting the message and carry on. Then the whole business might repeat itself.
Help!
Frank

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

Firefox doesn't accept some sites and IT'S FREEZING sometimes and you can't write anything or click anywhere...reaaly disaponting, I have to restart it and after a while same thing, I can't close any tab only by options close tab.

Firefox doesn't accept some sites and IT'S FREEZING sometimes and you can't write anything or click anywhere...reaaly disaponting, I have to restart it and after a while same thing, I can't close any tab only by options close tab so you can't use Command Q or Command R for reloading...GRRRRRrrrr, hate this

As I asked previously are you able to have tabs open as a window by using the right clicking option ?
When you close Firefox you should use
*'''Firefox button -> File -> Exit '''
Are you doing that ?
I suspect what may be happening is Firefox is hanging as it closes down.
* see [[Firefox hangs or is not responding - How to fix#w_firefox-hangs-when-you-quit-it]]_firefox-hangs-when-you-quit-it
* this explains how to check & if necessary kill the process [["Firefox is already running but is not responding" error message - How to fix it#w_end-firefox-processes]]_end-firefox-processes
A related possible problem is that you may have built up many copies of the restore files. These are stored in the Firefox profile. The easiest method of finding the profile location istouse
*use '''Firefox button -> Help -> Troubleshooting Information <br /> -> [Show Folder]'''
*see [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
You need to look for the files ''sessionstore.js'' and numbered duplicates of that. Delete them.
* see http://kb.mozillazine.org/Firefox_hangs#Multiple_sessionstore.js_files

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way,

On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.

I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key.

When I compose and send a mail, it gets placed in Outbox and I get a prompt stating something like "relating the message is not supported". Even if I compose a newest age, it says the vey same thing. I just cannot send any response through my mail account

Similar Messages

Maybe you are looking for