When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
Its the same on most of the preset amps.
Please help, the apogee cost me £80!
Is it stopping recording after 8 seconds? Are you using Garage Band?
If both of these are correct:
This is actually a feature (i'm not sure why it defaults to this). Instructions for the iPhone version are below:
With the amp section open, touch the sproket on the upper right.
You should be in a "settings" type area with three tabs. Touch "Sections"
Select the section and switch it to automatic - it will now record until you stop recording by touching the stop icon.
Similar Messages
-
When I connect my guitar to garageband all the sound are cut. What canI do?
When I connect my guitar to garageband all the sound are cut. What canI do?
Command I will open the master window on the right. Make sure under "I"nfo lower right corner next to monitor, make sure it is not turned off. If you are playing an elctric guitar, don't bother with the no feedback setting.
Make sure the volume in system prefs is up and not muted. (system prefs.sound.output) -
Why does my nano keep turning off after a few seconds while I'm listening to my music? It's fully charged and brand new.
I've tried everything in the article "Troubleshooting iTunes for Windows Vista and Windows 7 video playback performance issues''. Here are my results.
My computer meets the requirements.
All software (Windows, iTunes and QuickTime) are up to date.
As for updating my drivers, I found nothing labeled 'Video'. The closest thing I found in Computer/Manage/Device Manager was to click + next to 'Display Adapters' under that I found 'Intel (R) HD Graphics Family' which I right-cicked. From the menu, instead of 'Properties', I selected 'Update Driver Software...', then I selected 'Search Automatically for updated driver software'. I saw the messages "Searching for Software... Searching online for Software... The best driver software for your device is already installed. Windows has determined the driver software for your device is up to date." I got these same messages when I searched for updated audio drivers.
My computer is already at the highest display resolution. (1366 x 768 recommended) That's as high as my resolution will go. Hmm, I noticed the article's example shows '(1920 x1080 recommended)'. Is my max 1366 x 768 resolution high enough?
As for QuickTime, deselecting 'Enable Direct3D video acceleration' had no effect. Disabling the DirectX entirely (Safe mode (GDI only)) allowed the audio to play, but there was no video, only a black screen.
As for turning on DMA, the only item under 'IDE ATA/ATAPI controllers' is 'Intel Mobile Express Chipset SATA AHCI Controller' So I right-clicked, selected 'Properties'. There's no 'Advanced Settings' tab in there. The tabs are 'General, Drivers, Details, Resources' no 'Advanced Settings' anywhere. So much for that.
'Readyboost' was already set at 'Do not use'.
No 'NVIDIA nForce Serial ATA (SATA) controllers' exist in my computer.
The problem still exists. Please help. -
apple sign shows up and then turns off after a few seconds, and i can not connect to my itunes
I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.
-
When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works! I have thought about deleting the app from my phone and then reloading it again but I worry that it will delete all my calendar info??? Any suggestions?
To reset, press and hold the Home and power buttons until the silver apple appears.
I would delete the app, reset the phone and then download the app again. Your calendar information should be stored on the phone as Week Cal uses the Calendar app information.
Best of luck. -
my iphone wont turn on but when i plug it in to charge the apple logo comes on and turns back off after a few seconds i dont know what to do i need help
Hello warhogs17,
After reviewing your post, it sounds like the iPhone will not turn on past the Apple logo. I would recommend that you read this article, it may be able to help the issue.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
When I delete an ongoing event in my calendar it reappears again after a few seconds. How do I fix this?
You might consider connecting it to the charger and charging up the battery overnight.
Please Get the iPod Touch User Manual for iOS 5 -
for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?
If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
http://concierge.apple.com/reservation/us/en/ -
Help, I let my battery go down completely, when I try to charge it the red battery flashing sign appears and then flicks off after a few seconds. I have tried a number of chargers and a docking station nothing works. Why won't it charge?
hi I have the same problem... tried many different docking ports and cords also switched from outlet to outlet..... left on on outlet for 7 hours and still nothing.. what should i do?
-
After the latest software update; the iPhone 5s reminder app is not reminding at all. Rather I input in manually or through Siri; the reminder is there but the date & time is not. When inputed manually; the date & is deleted after a few seconds. How can this be corrected?
big Geo.After the latest software update; the iPhone 5s reminder app is not reminding at all. Rather I input in manually or through Siri; the reminder is there but the date & time is not. When inputed manually; the date & is deleted after a few seconds. How can this be corrected?
big Geo. -
my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks
In the worst case, it's still under warranty (all 7th gen nanos are still under one year from purchase).
So, you disconnect it from power, and it almost immediately goes dead? You can try a Restore... but it doesn't sound like the type of problem a Restore will fix.
You should probably have it looked by Apple Tech Support. If there's an Apple Store nearby, you can take it to the store's Genius Bar. To avoid waiting, you can make a reservation at the store's web page
http://www.apple.com/retail/ -
When I''m playing a video clip the computer "locks-up" after a few seconds - what can I do to fix it please?
The latest is happening with the 12 little video clips sent to me by Apple entitled "Get to know your new iPad"
They run from 3 to 32 seconds and then "lock-up" on my iMac.
I don't have photobooth on my iMac
The link to the Apple promotion is :-
http://www.apple.com/ca/ipad/guided-tours/?cid=CDM-CA-DM-P0009300-160603-EN&cp=e m-P0009300-160603&sr=em
D -
When I power up my Imac, I see the white screen and the apple icon. After a few seconds the screen goes dark. I am able to still see the mouse arrow as I move it around. But nothing else. What is the problem and how do I recover?
Try this from another user:
1. Shut the computer down by holding the power button for 10 seconds
2. Restart the computer and press shift at the same time until you see the progress bar start moving
3. Once you reach the point where your screen goes dark and you see the cursor, type the first letter of the username for your computer, then hit Enter, then type your password, then hit Enter.
4. After a moment, you should see the spinning beach ball
5. Your screen should then move on to something along the lines of "Completing OSX Installation" (I can't remember the exact wording). Let it finish. After that it should go to your normal desktop and the issue should be fixed. (If your screen goes pitch black during this process, hit the space bar. I thought it wasn't working, but the screen was just sleeping). -
I Have an iPhone5 so has my wife, when we connect to Wifi, any wifi, home work or anywhere, it drops out after about 10 seconds, any ideas welcome
I have three suggestions for you (try them in order):
Go to Settings on your iPhone 5, General, Reset (all the way at the bottom), and try "Reset Network Settings".
Turn off your router and modem, wait about 5-10 minutes, then turn on your modem and router respectively.
Call Apple Support. Chances are they'll be able to give you the best support since they know their phone and the problems they've been called about prior to yours. Make sure you have some of your router information ready for them when the time comes. -
Garage Band/Guitar Help! My notes keep cutting off after a few seconds
So, I am having this problem where when I play my electric guitar, notes don't carry after a few seconds, especially if I try to bend the note. Cords seem to have sustain but whenever I play a solo string and try to bend or tremelo it, it cuts off within a second or two. When I say cuts off I mean the sound completely vanishes. Is there a fix for this? I tried the Squash Compressor but this failed.
Thanks and hope there is a fix as this is killing my jam.squashyo wrote:
when I play my electric guitar, notes don't carry after a few seconds, [...] it cuts off within a second or two.
turn off the noise gate
Maybe you are looking for
-
Currently your file upload field does not allow smartphone users to upload images/videos, any chance this may be possible soon? I used the following html5 coding on a separate site page and works well: <form action="server.cgi" method="post" enctype=
-
Lion SMB file sharing with windows "Access Denied"
In general SMB (windows) file sharing works fine on my home LAN (for Mac and Windows PCs). However, Adobe Flash CS3 for Windows (Win7x64) yields an "Access Denied" error trying to open any FLA file shared from my Mac Mini home server running Lion.
-
Since 5.1.5 I cannot post images in Apple discussions
I often post to a few Apple discussion forums. Often, to help others, a picture (more than likely to be a screenshot) is worth a thousand words. Since installing Safari 5.1.5, the dialog to insert a picture - in a post such as this - does not work an
-
Airport express and co-axial router
We just got a new cisco router which works off the spilt co-ax cable. My iMac can detect the new network and runs fine on it. But I can't get airport express to recognise the new network. Do I need to physically connect airport express to the route
-
It's like i've just installed everytime I start I tunes!?
Every time I start Itunes after a re-boot all settings are back to defaults and it asks about importing and all that. Today is had to analyze the entire playlist and said it wasn't working or something. This is on windows vista 64bit (which I am regr