When i connect my hp d110 to a network, it says to turn the printer on or it is offline.
My HP D110 is connected to a wireless network. Everything is set up correctly. When I tell it to print, it says I am off line or to turn the printer on. It is on and all reorts are good or pass. How do I turn the printer on...except with button on front of the printer?
It sounds like the printer is on.
Where is the offline message displayed?
What operating system does the computer use?
What brand and model is the router?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Similar Messages
-
When I connect my iPhone (5s) to my computer it says that it's storage is full and that I have over 4,000 pictures even though I have deleted all of them. It won't allow me to add music or anything else either because it says my phone is full. I have restarted my phone and the computer multiple times, but it still tells me that my phone is full.
iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
i already downloaded the ios 6.0.1 for my iphone when i connected my another iphone to update its asking again to download the ios 6.0.1 how can i use previously downloaded software
plzz help me as soon as possible
-
Bought wife an iPhne 4s for xmas. when i connect to itunes i get a message that says iPhone cannot be used because the Apple moible device service is not started. my iPhone and kids apple devices work fine but are on a seperate account. whats the deal?
Not sure why only one particular phone is having this problem but this article will help you check and restart it if it's in fact not started: http://support.apple.com/kb/ts1567. Even if it is running, suggest you stop and restart it.
-
When i connect my ipod shuffle to itunes i get an error message the ipod cannot be synced, the required disk cannot be found anyone have this happen? How do i get past it?
I seem to recall that this may be cause by overloading the USB bus (lack of power to go around). Shut down your computer. Reset the iPod shuffle using this procedure.
http://support.apple.com/kb/HT1655
Disconnect ALL peripheral USB devices, including keyboard and mouse. Power up the computer. If you need your mouse, connect it and launch iTunes. Connect the iPod shuffle to a direct USB port and try the sync again. See if there is any difference. -
When I connect my iphone four to my computer I no longer get the option to load photos from phone to computer. I think i have a driver problem as well. What should I do?
The AutoPlay function on the computer is controlled in Control Panel. Also, there needs to be current photos that have not been imported to the phone for it to start, and also the phone needs to be unlocked if you have a passcode on it. If you have not been prompted to "Trust" the computer on the iPhone and answered that, it will also make a difference.
Do you have the latest version of iTunes on the computer? What makes you think that you have a driver problem? You can take a look at Step 5 in this support document to see if that helps your driver problem. http://support.apple.com/kb/TS1538 -
I awoke this morning to find my iPhone 3g in recovery mode. I tried rebooting, charging, and when I connected to iTunes it gave me a message saying I had to finish recovery first. My screen shows the iTunes logo and the USB cable. Any ideas?
http://support.apple.com/kb/HT1808
-
Today was my ipod disabled. it says I need to connect to iTunes, but when I connect it brings up an error message that says I have to enter code but my problem is that I forgot the code!!!!
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Iv been trying to sync new apps I downloaded on my ipad2 and it isnt syncing. when I connect my ipad to itunes on my PC and click on the APPS tab I can see the apps on the PC but they are greyed out
Do you have restrictions enabled on your iPad? Go to Settings>General>Restrictions and see if you have it turned on. If so - see if you have installing apps turned off. If you do, turn restrictions off on your iPad and that may do it for you.
-
I am using iphone 4 Geveya in which I have to dial 112 after re-insertion of Sim Card. When i connect my phn to I tunes I got message to update the version of iphone. Some one has informed me that I can not update this phn will stop workin after update.
Kindly update me on this whether I need to update this or not.Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message. -
i have an iPhone 4 and when i connect it to my mac i cannot back up device and the bar is for the phone is only showing "Other" as the memory , Help ?
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Then...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414 -
i updated itunes 11.1 yesterday and now im trying to get my music on itunes to sync onto my iphone 4s but when i connect it through usb...Itunes is saying " waiting for changes to be applied"? so i dont know what to do cause i just want to sync my music from itunes to my iphone 4s
I had the same problem and the fix was so easy that I felt a little silly after spending 2 hours with an Apple Technician. At the end of it all, what I had to do was make sure ALL music was deleted from my iPhone 5 by going into usage and clearing out the music folder. All I had to do then was turn my phone off and turn it back on again. I had not done this after my phone upgraded to the new 7.0 IOS. What's the first thing you do when experiencing computer problems? Reboot! It fixed my problem and now my iPhone 5 synchs perfectly when I had it connected to my computer. I am also on iTunes version 11.1.
-
when i connect my ipad 2 to my computer it shows up in the devices list but when i click on it it just says ipad on the screen
If you have a photo program on your computer that can handle image downloading then you might be able to use that : http://support.apple.com/kb/HT4083
-
I have adobe editions 4.0 and I've been trying to get library books on my kobo for over 2 hours! The book goes onto my Kobo fine, but when I try to open in on my kobo it says, "Oops! The document couldn't be opened. It's protected by ADRM and is not currently authorized for use with your Adobe ID." It does it with every single book. I've never had this problem before. I've tried everything! Please help.
same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please
-
hi there, i installed a system update earlier on my MacBookPro and now it wont connect to wi-fi, working through Network Diagnostics hasn't solved the issue. all other devices here are connecting normally. any ideas?
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Maybe you are looking for
-
My screen has turn bright white?
I dropped my ipod touch and the scren turn white. I can unlock it and i can see my apps, but cant watch videos because of the screen. I cant play any games or use Facebook becaus i cant see anything. Can anyone help me please? Can Apple fix it for fr
-
Please Help!! Easy Application Tuning Question
Ok - this should be an easy one for seasoned vets (but not for a newbie like me) I've been asked by the boss-man to "find and tune the SQL that's causing the slowdown . . . " I'm on Oracle 817 running Peoplesoft Application. I've located the main pro
-
Help on JVM Crash with core dump on solaris - 1.5_17
Some times in my load test scenarios on sun os boxes JVM crashing with core dump. Here is some dump from the file # An unexpected error has been detected by HotSpot Virtual Machine: # SIGSEGV (0xb) at pc=0xfea07f40, pid=1564, tid=10 # Java VM: Java H
-
MMC starting error in CE 7.1 EHP 1
Hi Experts, I have installled SAP NW CE 7.1 EHP1 server sneak preview version on my machine. When i try to start the server using MMC , i am getting this following error. Would you guys know what is the cause for this. "current policies prevent insta
-
Creating a Custom DataNavigator like BindingNavigator
Hi All, I wan to create a custom BindingNavigator from dotNetbar ribbon control. Like wise in the property window we choosing a button as DeleteItem/ AddNewItem button, MoveNext button respectivaly for their operation of a .Net BindingNavigator. So I