When i connect my i phone with pc i cant see it in windows nor in i tunes
when i connect my i phone with pc i cant see it in windows nor in i tunes
Does it even give some sign that the cable was plugged in? Don't know with i4's but my i5 will do a characteristic beep, indicating that it has begun charging. If no signs of life occur, may be that the cable or its connectors are damaged and need replacement.
Similar Messages
-
How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time
How are you dialing these calls?
-
How do you get your iPhone to stop connecting to face time while on a voice call? And it also does this when I'm on the phone with someone who doesn't have an iPhone. I look down at my phone while on a call and it says connecting to face time
How are you dialing these calls?
-
i can not connect my i phon with my pc it shows athorised computer when i am trying to do authorised process the process done but again i connect my phon again show this errore please help me to solve my prob....
I have clicked on the connect button, but it brings up the same There is a problem connecting, and I have also tried SMB://
i tried pinging the ip address with in termial and it times out.
From my windows PC and I can access my MacBook Air just fine, -
Ever since my last update I have been unable to add songs from my i tunes library onto my i phone. The "add to" button does not appear for me when I connect my i phone. Can anyone shed some light on this for me?
Thanks for that 'sberman' - because my iPhone is backed-up to my work computer (only at this stage) I have had to call our IT Department in Adleaide. (4 times this morning). The last guy managed to get the phone into 'DFU Mode' - no more recovery mode screen - (kind of 'asleep' perhaps) from my understanding of same. I am awaiting a call again from IT so they can get my computer to actually recognise my iPhone on the C Drive. This also happened to one of my colleagues in Newman (WA). She got so frustrated with the whole process that she bought another phone the next time she was in 'civilisation.' She hasn't had any problems since. (Cross fingers).
Thanks again, Sandra2474. -
Tutorial - Connecting an Nokia Phone with an iPaq ...
This Tutorial is as a result of a post by qvodude on 13th January 2008.
Tutorial – Connecting an Nokia Mobile Phone to an HP iPaq Pocket PC
This tutorial has been done using a Nokia 6260 (S60 series 2) and an iPaq 5965 travel companion (windows mobile 5).
Turn on the phone and then go to menu>connections>Bluetooth. When you open Bluetooth you are asked to give your phone a name. (I named mine Nokia 6260). Hit ok. Then highlight Bluetooth and select options>change and switch Bluetooth on. Then scroll down to My phones visibility >options > change > shown to all >ok. Your phone is now set up.
Switch on the iPaq. Start > settings > iPaq Wireless and turn Bluetooth on. Then tap done. On the settings page tap on Bluetooth Manager. When you open Bluetooth Manager it gives you a welcome screen. Just follow the instructions. Luckily my phone is in the list so it was fairly simple. If your phone is not in the list then select Generic Dialer or generic generic. The ipaq will then search for devices in range. In my case it picked up my phone and my laptop. I then selected my phone and was asked if I wanted to pair the devices. I said yes accepted the code that was on the screen and then pressed next. A message then appeared on my phone asking if I wanted to pair with my iPaq. I entered the same code that was used on the iPaq and pressed ok. The ipaq then asked if I wanted to connect to the internet and I said no as I did not want to connect at this time.
On my phone if I highlight Bluetooth and scroll right it shows Paired devices > Pocket PC 5965.
I then tested the setup by tapping tools > connect on the iPaq. My phone then asked if I wanted to Accept connection request from pocket PC. I then selected yes and my Pocket PC showed that I was connected to my network (Optus).
I trust that this helps you. If you have any further problems let me know. I will be going away next Thursday 22nd and will not be back until Wednesday 28th. Whilst I am away I will not be in a position to access these forums so if you could get back to me before then I would appreciate it.
Regards
BarryHey Bazyeo, sorry im writing soooooo late. I just wonted to thank you for the post on "Connecting an Nokia Phone with an IPAQ..."
Been really busy with job changes and all, as you know the States (US) is going thru a really bad job $hit, and I got dump... well I **bleep** one of the upper management guys off and was asked to resign. But oh well thats another post
Adios mate!
Message Edited by qvodude on 16-Jul-2009 05:08 PM -
I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup" to have all the other information I had from my other iPhone load up to my new iPhone. Hope you can help. What is the difference between "Backup" and "Restore Backup"; is all that different from synching.Thanks. Ana
That's up to you. Do you want the data on your old phone on your new phone? If so, you follow the directions here:
http://support.apple.com/kb/HT2109
If you want to setup your new phone as a new device, then there is nothing you need to do. -
I need help. When I connect my I phone 5 to I Tunes it doesn't load it and I get the message that It doesn't recognize this device. To unplug and try again. I have done this 5 times and always get the same message, but when I plug it in it offers the option to download my pictures. What do I do to get it to reload and Sync?
Reset the device.
Try a different cable.
Try a different USB port.
Reboot the computer. -
Why i-tune has no response when i connect my i-phone?
why my i-tune has no response when i connect my i-phone? i want to restart my i-phone and i cant. i cant update to 6.0.2 version, it stuck when i update it from 6.0.1
Try resetting your iPhone, I think you need to hold down the middle button and the off button at the same time, this may help.
-
I Have a problem when am connecting my I phone to Mac. All my song are geting erase from my music player
<Edited by Host>rbncool wrote:
I Have a problem when am connecting my I phone to Mac. All my song are geting erase from my music player
<Edited by Host>
That usually means that you previously synced your iPhone to a different computer. An iPhone can only sync to one computer. If you try to sync to a different one the iTunes content on the phone will be replaced by the contents of the new computer. -
Autoplay window will not open when I connect Iphone 6 plus with Ver 8.1 and running windows 8.1 on pc.
Hi, sstroec,
How about your problem now? Is arnavsharma's suggestion helpful? If you need any further assistance, please feel free let us know.
Roger Lu
TechNet Community Support -
My iphone 5 got suddenly slipped into recovery mode when i was updating my phone with the latest update. I request the officials to act fast and come up with a recovery solution because the phone is unable to get restored on itunes due to "error 3" when ever i am trying to restore and neither of the istores have the solution for the same.
Hi, Milanista5
Thank you for visiting Apple Support Communities.
When experiencing issues restoring or updating an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iOS: Troubleshooting update and restore issues
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
My iPad will only recognise photos when I connect an Sd card with the camera connection kit. It doesn't recognise video clips from the same card?!
Most probably because your camera records videos into MTS files, which aren't cmpatible with iOS. Read http://www.iphonelife.com/blog/87/playing-back-1080p60i60p-non-mov-videos-right- your-camera for more info and the alternatives (preprocessing ("remuxing") on a desktop etc); don't forget to follow the iVI review link at the bottom if you have a Mac.
-
Since I updated my phone with IOS7, i cant use imessage
Since I updated my phone with IOS7, i cant use imessage
I had same problem on my I pad when it had an upgrade to ios7.
My daughter just switched my I Pad off, & rebooted it
It worked straight away, into I Tunes no problem
I had just spent 10 days trying to sort it out. -
I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format". Can someone please help me sort this problem, it's so frustrating!!!!!!
It could be an indication or a damaged or dying hard drive. I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread. He also covers what the resulting numbers indicate.
https://discussions.apple.com/thread/3784647?start=0&tstart=0
B-rock
Maybe you are looking for
-
WBS Element wise sales order report.
Hi guys,, I need to create a report to display Sales order details and its amount based on WBS Element which will be given on selection screen. please suggest how do i proceed and the link between the tables used.. I tried using PRPS,VBAP and VBRK bu
-
Just wanted some input in regards to what issues need to be resolved within the first update, excluding the RF reception, I think we all want that fixed ASAP... I have never heard of reception issues being fixed from a firmware issue, but maybe they
-
I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won't launch apps. When asked say "launch Facebook" Siri responds with "it doesn't look like you have an app named Facebook" and I get the same results when trying to launc
-
Hi, I want to every FI document posted by FB01 be blocked for payment by default, except a given document type. Can anyone tell me how ca i do this in costumizing ? Best regards, Paulo
-
Hi Experts, Please check this Developer Trace of Dispatcher, this is stopped, when I am restarting my server, it is giving errors : running but not connected to message server, and running but dialog queue standstill, J2EE service unavilable. trc fi