When I connect my iPad to my new Mac Pro, I can't see my pictures

When I connect my iPad to my new Mac Pro, I can't see my pictures on iPhoto in Mac Pro under devices.I want to import my photos from iPad to Mac Book. Can you please help me?
Thanks and regards,

Oops ... You are correct. I misread your question. My sincere apologies. You want to import the photos from the iPad into iPhoto - not the other way around.
Connect the iPad to the Mac with the cable and launch iPhoto. Your iPad should appears under the devices heading in iPhoto - in the left sidebar - just like it does in iTunes. Click on the iPad name. Then you can import the photos.

Similar Messages

  • I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

    I want to Connect my Mac Mini as a Slave to a Mac pro Server while at the same time using the Mac mini's thunderbolt ports peripherals ( ie monitor, Sound Card, Hard drives) Creating a poor man's new mac Pro. Can this be Done?

    Well, I really would love the new unreleased mac pro however , I'm not sure of the expected cost , Everyone speculates from $3,000 to $8,000, in which I may have to wait a while to purchase.
    To the point .... I want fully functional thunderbolt ports to be on the current mac pro's .... wonder if anyone had workarounds yet?...  or could I chain the the current mac pro to a mac mini to make that happen?

  • I have a new mac pro and can't get a side scroll bar.  What can I do to get this?

    I have a new mac pro and can't get a side scroll bar.  How can I get this?

    The scroll bar is now set to appear automatically when you start scrolling with a trackpad or scroll wheel mouse. If you are using an mouse without a scrolling device, you should change a setting.
    In System Preferences, click General, and in the Show Scroll Bars section, click the option for how you want it to work. If you want to see them all the time click "Always."

  • Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

    Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
    Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
    - I downloaded and installed the Windows Migration Assistant from Apple
    - My Mac recognized PC and displays passcode
    - The sasscode does not show / display on my PC
    - My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
    - Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
    I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
    Any ideas?  If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

    Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
    If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

  • Just got a new mac pro and can't manage to set a password and keep it.  It keeps telling me I have the wrong password.

    Just got a new mac pro and can't manage to set a password and keep it.  It keeps telling me I have the wrong password.  I want to start over and I can't even get back in to do this bc it won't take any of my passwords.  How can I start over completely?

    You got a new laptop? try asking there or in Lion forum.
    If it has Lion, use the Recovery Mode boot Command-R
    Use that to erase and reinstall - it has network install ability.
    Want MacBook Pro forum or Lion Community?
    MacBook Pro
    Lion Mac OS X Communities
    New, as in from Apple, it would have asked for full setup.
    Want to reset the password? (it is used then I'd wipe it clean and start over)
    How to run the Password Reset utility in OS X 10.7 Lion

  • When there will be an upgrade for new Mac Pro's?

    When there will be an upgrade for the new Mac Pro's?

    Apple usually doesn't announce new products in advance. If you want speculation, try this:
    Mac Buyer's Guide: Know When to Buy Your Mac, iPod or iPhone

  • Connecting Asus monitor to a New Mac Pro

    I am considering getting an Asus PA279Q monitor to connect to a NEW Mac Pro (the round black one).  The MP does not seem to have a display port.  The Asus specs show “Signal Input: HDMI, DisplayPort 1.2, Daisy-chain DisplayPort Output, Dual-link DVI-D”.  The Asus also has “USB Port(s): 3.0, 1 x upstream, 6 x Type A ports.”  My understanding is that HDMI ports do not support 2560x1440 resolution.  Have  they have been upgraded to do that?  If I need an adapter, please describe it.
    Thanks

    And if you want to use AdobeRGB mode, you have to do this trick :
    http://www.ireckon.net/2013/03/force-rgb-mode-in-mac-os-x-to-fix-the-picture-qua lity-of-an-external-monitor
    Otherwise sRGB and AdobeRGB modes can't be used.
    I do this yesterday and my PA279Q work fine.
    I hope package are the same between France and other country (for cables inside : HDMI, mDP/DP, DVI, DP/DP).

  • How to make new Mac Pro with iWeb 08 see my existing .mac site.

    About a year ago I bought a new Mac Pro. Before that I had a G4 that I had used with an older version of iWeb to create a basic website for my business. I figured with the new Mac when I opened iWeb 08 it would see my .mac settings in System prefs and automatically open it but it does not. It will only let me creat a new site, there is no way to redirect it to an existing site.
    Anyone know how I do this or what I am doing wrong?
    Thanks
    Sean Beresford

    http://iwebfaq.org/site/iWebTwocomputers.html

  • Need a new mac pro! Can I boot MacPro 6,1 (mid 2012) with an internal HD with OS 10.6 (Snow Leo)?

    5 hours after reading here: (so much information that says "yes" "maybe" "no".....)
    I want and have to change my actual MacPro (late 2007) to a newer one, because without my business is over.
    The newest one (end 2013) is not possible, because my other hardware is too old for that one.
    (still need Firewire and Rosetta)
    So I decided to buy an older "classicle" MacPro to put my 3 or 4 pieces of 2TB HDD in...
    ...... But I still need Rosetta, -> OS 10.6
    My question is:
    Can I boot a mac 6,1 (mid 2012) with a Harddisk with 10.6, I take out of my old machine?
    yes? anything to be aware or to update? (answeres here say mostly yes, sometimes, never ...)
    For sure I am interested in the latest model..... but will it work?
    If not:  I will buy a mac 5,1 (mid 2010).
    Anything to be aware or to update, if I pull in my HD with 10.6 out of the old model from late 2007?
    I don't want to downgrade to SL !!!!!!!
    I just want the Possibility to boot internal from the original OS on the first drive and from 10.6 on a second drive !!)
    (This good old Power Machines (all in one) will be jewels next year.....)  ;-)

    Mac Pro
    Date introduced
    Original Mac OS X included
    (see Tips 1 and 3)
    Later Mac OS X included
    (see Tip 1)
    Mac OS X Build(s)
    (see Tip 2)
    Mac Pro (Mid 2012)
    Jun 2012
    10.7.3
    10.8, 10.8.3
    11D2001, 12A269, 12D78
    Mac Pro (Mid 2010)
    Aug 2010
    10.6.4
    10.7, 10.7.2, 10.7.3
    10F2521, 10F2554, 11A511a, 11C74, 11D2001
    Mac Pro with Mac OS X Server (Mid 2010)
    Aug 2010
    10.6.4
    10.7, 10.7.2, 10.7.3 (Server)
    10F2522, 11A511a, 11C74, 11D2001 (Server)
    Mac Pro (Early 2009)
    Mar 2009
    10.5.6
    10.6
    9G3553, 10A432
    Mac Pro (Early 2008)
    Jan 2008
    10.5.1
    10.5.2, 10.5.4
    9B2117, 9C2031, 9E25
    Mac Pro
    Aug 2006
    10.4.7
    10.4.8, 10.4.9, 10.4.10, 10.5
    8K1079, 8N1430, 8N1250, 8K1124, 8P4037, 8R3032, 8R3041, 9A581, 9A3129
    -- from:
    Mac OS X versions (builds) for computers
    For example the Mac Pro 2010 CAN run 10.6.4 or later BUT--
    --- the last "Full Retail" 10.6 DVD conatins 10.6.3, which will not boot. You need a different Mac of just the right age to Install on, [starting from a Full Retail DVD, not a DVD from a different model] update to 10.6.8, then swap the drive over.
    The assertion has been made that the 2012 model (which runs 5,1 firmware) is indistinguishable from the 2010 model (which runs 5,1 firmware) as far as Hardware and therefore as far as what Mac OS X it can run. EveryMac.com agrees that this model will run 10.6.4.

  • I am trying to backup my loaded ipod to my new pc. I have saved my library to a flash drive, but nothing shows up when i connect to itunes on my new pc. How can I transfer my music library over?

    I am trying to back up and sync my ipod nano to a new pc. When i connect, my ipod shows up under devices, but no music shows up. I saved my library to a flash drive and saved to my new pc, but it will not drop into itunes. How do I transfer my itunes library from and old pc to a new one? I have looked up all the info, but nothing has worked.

    I think I may of found a solution to your problem, have a read of this article
    http://support.apple.com/kb/ht1751

  • TS3622 It even happens when you connect BOTH power cables on a Mac Pro 3,1

    I  have a Mac 3,1 and have recently fitted the ATI Radon HD 5870 replacing the old graphics card. (It is one week old)
    One monitor is the NEC Spectraview 2690 which is connected to the mini-Display port and the other monitor is the Apple 23" connected to the DVI port.
    After I have shut down the Mac Pro at night and restart it the following morning,  two (BOTH) blank screens appears on booting up.
    I then have to press and hold the power button to shut down the system and then reboot the sytem and then the screens come up properly for me to log in.
    I can then use the computer as normal.
    Why does this happen ?
    System below running Mountain Lion
    System Software Overview:
      System Version:               OS X 10.8 (12A269)
      Kernel Version:                   Darwin 12.0.0
      Boot Volume:                    Macintosh HD
      Boot Mode:                         Normal
       Model Name:                    Mac Pro
      Model Identifier:               MacPro3,1
      Processor Name:               Quad-Core Intel Xeon
      Processor Speed:               3.2 GHz
      Number of Processors:       2
      Total Number of Cores:      8
      L2 Cache (per Processor):   12 MB
      Memory:                              26 GB
      Bus Speed:                         1.6 GHz
      Boot ROM Version:               MP31.006C.B05
      SMC Version (system):          1.25f4
      Serial Number (system):         Xxxxxxxxxxx
      Hardware UUID:                    20D0D8B4-FE08-51EC-850F-A66BFBF9BC3B
    ATI Radeon HD 5870:
      Chipset Model:          ATI Radeon HD 5870
      Type:                         GPU
      Bus:                              PCIe
      Slot:                              Slot-1
      PCIe Lane Width:          x16
      VRAM (Total):               1024 MB
      Vendor:                         ATI (0x1002)
      Device ID:                        0x6898
      Revision ID:                    0x0000
      ROM Revision:               113-C0780C-194
      EFI Driver Version:          01.00.436
      Displays:
    LCD2690WUXi:
      Resolution:                    1920 x 1200 @ 60 Hz
      Pixel Depth:                    32-Bit Color (ARGB8888)
      Display Serial Number:   83107092YB 
      Main Display:               Yes
      Mirror:                         Off
      Online:                         Yes
      Rotation:                         Supported
    Apple Cinema Display:
      Display Type:               LCD
      Resolution:                   1680 x 1050
      Pixel Depth:               32-Bit Color (ARGB8888)
      Mirror:                         Off
      Online:                         Yes
      Rotation:                    Supported

    There is no BIOS in OS X. There is only the EFI stored in ROM that is not user modifiable. OS X is probably checking Bay 0 for the boot drive since that is where it should be. It won't check the Tempo drive since it is treated like an external drive. I suggest you open Startup Disk preferences to see if the Tempo device is selected as the boot device. If it isn't, then select it. That will probably shave off a few seconds in the startup time.

  • New mac mini setup can't see Bluetooth keyboard

    Brand new mini and in setupmit can't see Bluetooth keyboard or trackpad. Any ideas on how to complete setup? Anyone else had this problem?

    After having the same issue on a new Mac Mini with 10.7, and pulling my hair out I found the following 'hack' to set up a wireless keyboard during initial setup.Please bear in mind that I had access to a USB mouse, but NOT a keyboard, so this should help if you want to pair a bluetooth keyboard during the initial setup process.
    In the setup process click next until you reach the account creation screen - you can't get past this one wiothout a keyboard.
    Right click on the empty "Full name" input field and select "Show spelling and grammar"
    Now you should see a window. Bottom left corner, click on the "Automatic by language"
    Select "Open text preferences" from the menu, toward the bottom
    At this stage you should see the top menu bar, with System Preferences running
    Click View from the top bar menu, then select Bluetooth
    Now you are able to pair your bluetooth keyboard in the usual way, clicking on "Setup new device"
    Hope this saves some time for people with the same issue.
    Apple please fix this, it is not a good first impression.

  • I just got my new Mac Pro and can't seem to connect to my HP6380 printer.  Any suggestions?

    I

    go into printer preferences and try adding it (the little plus sign on the bottom)
    I don't know how you have it connected, so I can't offer any specific advice, also, check HP's website for any updated drivers, or run Software update to see if some have already been released
    hope this helps
    John B

  • How do I connect my iPad to a new PC and lose the link to my old PC?

    I have purchased very littl music through iTunes, but I have a great many CDs copied to iTunes. I established a good link between my iPad (iOS 7) and my PC. Initially I had iTunes Match but my broadband was too slow. I used the sync over wi-fi connection.I then changed my PC. When I connect my iPad to my new PC, iTunes does not see the device. I have recently deauthorised all my devices and re-authorised my new PC (Windows 8.1). My iPad in the Sync over Wi-Fi settings, still has my old PC device name and does not appear to be amendable. I don't mind losing any iTunes data already on my iPad. Does anyone knw what I can do to establish the link?

    Hey HK Sussex,
    Thanks for the question. It sounds like you need to setup Wi-Fi syncing with your new computer:
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    http://support.apple.com/kb/TS4062
    Turn on Wi-Fi syncing
    To sync your content to your iOS device through Wi-Fi, you must turn on the option in iTunes:
    1. Connect your iOS device to your computer using the Apple USB cable.
    2. Open iTunes and select your device on the left side of the iTunes window. In iTunes 11, your device will be in the upper-right. You can also find your device by expanding the sidebar from the View menu.
    3. Click the Summary tab.
    4. Scroll to the Options section and select "Sync with this [iOS device] over Wi-Fi."
    If you are having issues with your device not being recognized in iTunes when connected via USB, see this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • Deleted songs on my iPod by sync with new Mac - ups! Can I sync with iPad to get all song back?

    deleted songs on my iPod when sync with new Mac - ups! However all songs are still on my iPad library. Can I sync with iPad to get all song back?

    You can use the transfer purchases feature to put the songs back into iTunes from the iPad - as long as the songs were purchased from iTunes.
    Connect the iPad, launch iTunes and then right click on the iPad name under devices and select Transfer Purchases. But ..... Before you do that - turn off auto sync first.
    Launch iTunes and the go to iTunes>Preferences>Devices>Prevent iPods, iPhones and iPads from syncing Automatically. Check the box at the bottom that says that. Then click OK. Then you can connect the iPad to the new Mac to transfer the purchases.
    This will only work for music purchased from iTunes. If you have music ripped from CD's, you will need a third party app - like TouchCopy.
    You can also download the songs again in iTunes as long as you use the same Apple ID. But read this about downloading past purchases as there are some restrictions based on where you live.
    http://support.apple.com/kb/HT2519

Maybe you are looking for