When i connect my ipad to pc why it cannot charge
when i connect my ipad to pc why it cannot charge
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom
Similar Messages
-
TS3221 Why do I see a 0xE8000003 message when I connect my iPad 3 to my PC?
Why do I see a 0xE8000003 message when I connect my iPad 3 to my PC?
Perhaps this will help:
http://support.apple.com/kb/TS3221
If not, see the several threads on the issue under "More Like This" at the right of this page.
Regards. -
Why is it that when i connect my ipad the laptop only detects the storage and does not allow me to send any files to it?
The iTunes application is used to transfer content to the iPad.
See http://www.apple.com/itunes/download/ -
Why does it say I have no service when I connect my Ipad 2 to my comupter with internet thru an aircard. First time user.
Do you have gfxCardStatus installed? Is your monitor set to "Integrated" or "Discrete". You want it set to Discrete to drive the external HDMI display.
Try resetting the PRAM and SMC
<About NVRAM and PRAM>
<Intel-based Macs: Resetting the System Management Controller (SMC)>
Are you sure you have a good miniDisplayPort to HDMI cable?
Do you have another HDMI display you can test against (your neighbor's HDMI capable TV).
Do you have friend that can test the cable using their Mac and maybe their TV or a monitor that has HDMI input. -
When I connect my iPAD to my PC it no longer opens it at as device in itunes.
This has worked in the past.
I don't have problems with my old iPOD. That is recognised and syncs ok.
Also, the PC recognises the iPAD as a drive so I'm not sure why it doesn't open it in itunes... Very frustrating.Thanks, this helped. THere was a new version of iTunes I downloaded to my PC and now the iPad is recognized.
The problem now is that I get the message that I cannot backup my iPad as my PC is not authorised, even though when I click to authorize it says my PC is already authorized.
I will click through the forum to see if there is an answert to this. -
I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
hello all .. i have a big problem in my ipad version 5.1.1 that is when i connect the ipad with my computer the i tunes give me this message ( itunes couldnt connect to this ipad .an unknown error occurred (0xE8000012).) how i can solve this problem please
and this is an pic for the problemThere is some troubleshooting for 0xE8 error codes on this page : http://support.apple.com/kb/TS3221 - you could see if anything on that page fixes it
-
I really need HELP!!! I have a laptop that runs with windows vista, and I have been having issues trying to get it to download the new version of itunes that would be compatible to the new version of ios 7 that I have already updated on my ipad. I have downloaded this three times, it shows that the download is complete, but when I connect my ipad to my laptop it is still telling me that I have to download the new version again and it will not sync with my ipad until I do. Does anyone else have this issue and can anyone help me figure out how to correct it? I would be most grateful!!
sign out from the creative cloud and then sign back in
Sign in, Sign out | Creative Cloud desktop app -
I am having all kinds of trouble with itunes and updating my ipad. I open itunes up but it doesn't do anything except open to a blank screen. I try to access the itunes store but it won't go there. When I connect my ipad, and try to update it, it starts and then I get a message that says backup cannot be saved on this computer. I have tried everything suggested to no avail. This is the 2nd or 3rd time I have had problems with itunes. Sometimes I even get a message that I am not connected to the internet.
I have uninstalled and re-installed. Any help?You might not have enough space left on your hardrive.
-
iOS 5 seems to work on my ipad, but apparently something went wrong when restoring. I lost music and movies, and when I connect the ipad to my macbook, I get the message that itunes was interrupted when restoring. I try to restore again and I get the message "An error occurred while restoring this iPad (-50)." What happened and what should I do?
I have had the same issue since day 1 of the ios5 installation. I always hit "Cancel" and then the iPad eventually shows up again in iTunes. Then a few hours later, I get the same message again. Annoying, but I've not found a way around it.
-
When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected." iPhoto eventually launches but iTunes will not launch iTunes. iPad will not charge. Restarted iMac and rebooted iPad and no difference.
Hi GJ374,
Thanks for using Apple Support Communities. This article has steps you can take for issues with your iPad not being correctly recognized in iTunes:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Ari -
Is there a way to prevent iTunes from starting up when I connect my iPad?
Is there a way to prevent iTunes from starting up when I connect my iPad? We use apple configurator and would prefer to have that open up, if possible.
When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.
-
i have just downloaded and installed the latest version of itunes. Now when i connect my ipad to my computer via USB, itunes states that the apple mobile device service cannot be started because of an unknown error (1058). The connection worked fine with the previous version of itunes.
so then i tried intsalling a stand alone if apple mobile device support (amds) but still it doesnt work
Did you get an error message when you did the standalone AMDS install? If so, what does it say? (Precise text, please.) -
Can anyone help my itunes stops working when i connect my ipad to my computer a windows error message comes up looking for solution but then closes itunes.
Hi tokley13,
To troubleshoot this issue where iTunes is quitting unexpectedly, please follow the steps in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H. -
Hello. When I connect my iPad, to my PC, there are 3gb taken up by "other". How can I free this up? Thanks.
Hi Westindiandiva,
Depending on your current configuration, a certain amount of storage marked as Other on your iPad may be normal. For more information about managing storage on your iOS device, you may find the following article helpful:
See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
Regards,
- Brenden
Maybe you are looking for
-
Material description in Unicode ECC 6.0
Dear expert, we have SAP ECC 6.0 (Unicode) on Oracle 10.2 If we logon using sapgui in english, can we enter any material description language as chinese, arabic, cirillic, etc. ? Is this right? thanks for your help. Mario
-
Syncing Apple TV to watch movies
Hi Everyone, I have the most up to date ITunes and the new Apple TV, my question is, I have previously bought content from ITunes (TV Shows,Movies) from my MBP and they have been available to watch on my apple TV. I have some older movies on my MBP t
-
How to Lock a data base table for write access.
Hi All, I have a requirement where in I have to insert a bunch of data into a standard table using some function module. I want to lock the table for the others to insert/modity the records during my insertion. Please help me provide the procedure ho
-
Execute code from a string?
I have a Java program that draws lots of different types of curves. I need to program how to save a drawing to a file. It would be easiest to make a file that has the string of the code which recreates the drawing. Is it possible to execute the conte
-
Getting "internal error" when trying to publish
Help please I've been working on this site deligently. Then all of a sudden I cannot preview or publish my file. Every time I try to preview I get "internal error" does any know what's going on? Please help.